Bought myself yesterday a Rallye for £1400 93k on the clock and it needed saving!





OK, now eagle eyed ones of you will notice that there are some stickers that do not belong on the Rallye....

So bring on the first part of the project :p

Early this morning i got up, removed the incorrect stickers and gave her a bath.






And i trial fitted my new grill that came from the DturboS - that many of you remember


Finally my list of things to do, might as well whilst i wait for my licence back

Engine Bay:
- Take engine out and remove rust followed by treatment and respray of bay.
- Clean up and spray Engine removing corrosion
- Service and replace Cambelt
- Move Air Induction kit

Interior:
- Repair/Replace Radio head unit
- Sew Drivers seat up
- Move Amp and tidy up wiring
- Fix interior light

Exterior:
- Replace droplinks
- Find and sort exhaust leak
- Refurb Cyclones
- Remove rear Wiper
- Fix Trolley dent on N/s Door
- Push out dent on O/s door
- Damage on N/s Mirror
- Clean and paint 2 minor rust spots on Bonnet
- Replace morrettes with Crystals
- Replace Fog lights with Rallye Blanks
- T-cut 16v marks left on rear Quarter panels.
- Fit and paint new grill

________________________________________

Richies Project Rallye

Electrical work carried out in Portsmouth

- Top Tip!!!

Glad to see people are still saving these.
I dont know what it is with rallyee's but logically im alway like. Why would I want one, I have a GTi-6 and a Rallyee is poverty spec . Tbh I think I just like the stripes.

Should be awesome when done though

________________________________________

Ex- Phase 3 China GTi-6 T-Reg

also don't like the grille. but the sticker is standard ...

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]

Look again

________________________________________

Ex- Phase 3 China GTi-6 T-Reg

Imagine the grill in black and on the Rallye, this is what it looked like on the old Dturbo S


Bear in mind that the Morrettes will be going and replaced with Crystal PH3 Headlights.

Therefore; if anyone is interested in having them, i'd preferably want Crystals in exchange (once i make sure these ones are in good enough condition to pass on).

Aside from that, thanks for the comments and opinions so far!

________________________________________

Richies Project Rallye

Electrical work carried out in Portsmouth

- Top Tip!!!

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

you know you can replace the units in Morettes?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Jeez his sale price was optimistic then !

________________________________________

I'm Si btw

Night Blue VW Golf GTD
Bianca LBSC Rallye - Track/Road Slag Project Thread
Sparkling Silver Mini Cooper D - Super Dooper - (The other half's wheels)

Right, spent today removing the engine - long old process after i had to angle grind through the Ball joint and a couple of other Bolts.

I also had to wire brush the rust off of my chassis minimising the corrosion that had occurred




Gained some more things to add to my shopping list
Droplinks
Ball joints
Driveshafts.
x1 Cyclone to use as a spare.

________________________________________

Richies Project Rallye

Electrical work carried out in Portsmouth

- Top Tip!!!

@ angle grinding through ball joint.classic case of you're doing it wrong!!!!!!

^^this even if you dont have a splitter you can use a chisel and club hammer?

________________________________________

cherry p1.....SOLD (regreting this)
blaze p2.....why did i buy this SOLD
Black p3

Well after a day of working on the shell, i have finally cleaned up 80% of the rust and sprayed it black to protect it.
Some more pic Whorage

The Chassis before the work done




After a majority of the work




The bits that still need wire brushing down


And me after a long day of wire brushing!

________________________________________

Richies Project Rallye

Electrical work carried out in Portsmouth

- Top Tip!!!

Getting through it

Have you treated the pitted areas where you removed rust from?

Unreal the amount of surface rust on the majority of these old sheds now

After looking at your gay picture I can now see why you like the grille You are the young chav I recommended you sold the grille to on E-Bay!!!!!!

________________________________________

Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........

Mac1 ZR R1 kit car build in progress.