|
| Author | Subject: 30V6 Maxi |
 jamiek_uk2000
Seasoned Pro  Location: Llanelli Registered: 18 Apr 2009 Posts: 1,925 Status: Offline |
Post #101
Going to need some big anchors on the front to slow that thing down then? How wide is the rear end of that compared to where a normal maxi kit puts the wheels? Is that the standard offset wheel for a ClioV6? So many questions, none of which will make any difference to me, but yet still I need the answers to ________________________________________ 205 GTi Red - G939 RTU - Died!306 GTi 6 Diablo - Being resurrected! Project Thread Looking for: VTS P1 Rack PR1.2 16" |
 Posted 24th Mar 2014 at 23:01
|
|
|
Carl Chambers
Seasoned Pro  Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #102
jamiek_uk2000 wrote: Going to need some big anchors on the front to slow that thing down then? How wide is the rear end of that compared to where a normal maxi kit puts the wheels? Is that the standard offset wheel for a ClioV6? So many questions, none of which will make any difference to me, but yet still I need the answers to I have a 330mm big brake kit for the front so that's fine. The rear of the 306 maxi is about 3 inches wider, the front wheels on the Clio are a wider offset than the rears, very strange but its because the rear is Laguna and the front is standard Clio. but with the wider front wheels on the rear its the perfect offset for the Maxi kit! ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 1st Apr 2014 at 21:50
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #103
Adjustable rear arms as one of mine was bent and replacements from Renault are expensive and hard to get.    ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 1st Apr 2014 at 21:51
|
|
|
pugheaven
Seasoned Pro  Location: Fareham Registered: 17 Dec 2006 Posts: 4,602 Status: Offline |
Post #104
Update please  |
|
Posted 15th May 2014 at 15:08
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #105
Sadly all is on hold due to my race car blowing its engine to bits!  so no money to get both done. ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 17th May 2014 at 07:27
|
|
|
mechanical_repairs
Seasoned Pro  Location: leicester Registered: 10 Jan 2005 Posts: 12,122 Status: Offline |
Post #106
Carl Chambers wrote: Sadly all is on hold due to my race car blowing its engine to bits! so no money to get both done. I thought that wasn't that long ago built, do you get a warranty with a race engine? Sorry to hear that. Carl ________________________________________ C.G.Cars of Leicester, Peugeot/Citroen/Renault specialist Tel: 01162 624498/07799 405184 WWW.CGCARSLEICESTER.CO.UK36 narborough road south, Leicester LE3 2fn MOT station now open, tests £35 with a free retest. Recovery available with a recovery unit, for those not so local jobs Also offer the loan of a free courtesy car 306 dturbo |
|
Posted 17th May 2014 at 15:49
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #107
mechanical_repairs wrote: Carl Chambers wrote: Sadly all is on hold due to my race car blowing its engine to bits! so no money to get both done. I thought that wasn't that long ago built, do you get a warranty with a race engine? Sorry to hear that. Carl I had a bottom end rebuild beginning of last year but sadly its dropped 2 valve heads off at 8000rpm! no warranty with race engines! ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 17th May 2014 at 17:32
|
|
|
pugheaven
Seasoned Pro Location: Fareham Registered: 17 Dec 2006 Posts: 4,602 Status: Offline |
Post #108
You could always sell it to me and I will finish it one day lol |
|
Posted 17th May 2014 at 17:35
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #109
pugheaven wrote: You could always sell it to me and I will finish it one day lol tempted but no will tuck in the back of the garage. currently sorting through all sorts of crap that I have and listing it on ebay or on here! ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 17th May 2014 at 18:05
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #110
Carl Chambers wrote: mechanical_repairs wrote: Carl Chambers wrote: Sadly all is on hold due to my race car blowing its engine to bits! so no money to get both done. I thought that wasn't that long ago built, do you get a warranty with a race engine? Sorry to hear that. Carl I had a bottom end rebuild beginning of last year but sadly its dropped 2 valve heads off at 8000rpm! no warranty with race engines! An all to familiar story with them engines I believe, Pete has has the experience a few times, bad luck Carl! ________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!  |
|
Posted 17th May 2014 at 23:58
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #111
jeffers wrote: Carl Chambers wrote: mechanical_repairs wrote: Carl Chambers wrote: Sadly all is on hold due to my race car blowing its engine to bits! so no money to get both done. I thought that wasn't that long ago built, do you get a warranty with a race engine? Sorry to hear that. Carl I had a bottom end rebuild beginning of last year but sadly its dropped 2 valve heads off at 8000rpm! no warranty with race engines! An all to familiar story with them engines I believe, Pete has has the experience a few times, bad luck Carl! yeah I know! ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 20th May 2014 at 21:22
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #112
damn, sorry to hear that Carl, guess these engines are getting on a bit now, they were never going to last forever being such a restricted build and they seem, to have a rep for that!________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 20th May 2014 at 21:29
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #113
Will you build the next one yourself?________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 21st May 2014 at 08:15
|
|
|
Carl Chambers
Seasoned Pro Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #114
daveyboy wrote: Will you build the next one yourself? built some of the last one my self, its the machining etc I cant do, so its sometimes better and easier to get the engine builder to do it all. ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 21st May 2014 at 22:19
|
|
|
steve h gti-6
Seasoned Pro  Location: Carterton Registered: 04 Dec 2006 Posts: 1,583 Status: Offline |
Post #115
Any updates young man ?????????????________________________________________ "Gotta Love The 6"According to my wife i think the 6 is the fastest car in the world, perhaps she is right LoL ! |
|
Posted 29th Aug 2014 at 08:17
|
|
|
scotzman
Seasoned Pro  Location: Dundee Registered: 24 Jun 2011 Posts: 1,408 Status: Offline |
Post #116
What happened to this?________________________________________ '90 1.6 205 GTi, '98 306 GTi-6 |
|
Posted 20th Oct 2015 at 16:29
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.