Post #1
As in title, need a TB gasket. Possibly also interested in a genuine inlet manifold gasket as well.________________________________________
61k miles Ph.1 Diablo '6 Project Thread
|
displaying posts 1 to 14 of 14
| Author | Subject: Throttle body gasket & possibly inlet manifold gasket |
 RetroPug
Seasoned Pro  Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
|
 Posted 13th Dec 2015 at 22:06
|
|
|
fatlapit
Seasoned Pro  Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #2
Have a look for thermatec gaskets bud they are ptfe________________________________________ |
|
Posted 13th Dec 2015 at 22:30
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #3
I'd prefer to spend less and just get a standard gasket if anyone's got one?________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 16th Dec 2015 at 22:21
|
|
|
marksorrento205
Seasoned Pro  Location: Airborne in the lanes Registered: 26 Aug 2008 Posts: 2,225 Status: Offline |
Post #4
I think I have a load of tb gaskets at home as I had to buy a pack of ten. I will check I can find them. Price would be list price on service box plus a stamp.________________________________________ How to do a clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & = |
|
Posted 17th Dec 2015 at 16:00
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #5
Yes please. PMs aren't working but I can give you my email if you find one?I'll call a dealer tomorrow and see what they say as well. Thanks. ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 17th Dec 2015 at 17:45
|
|
|
cully
Seasoned Pro  Location: Cullompton Registered: 12 Jun 2013 Posts: 1,093 Status: Offline |
Post #6
cut my own from some ptfe sheet with scissors  cereal box works too  |
|
Posted 17th Dec 2015 at 18:24
|
|
|
marksorrento205
Seasoned Pro Location: Airborne in the lanes Registered: 26 Aug 2008 Posts: 2,225 Status: Offline |
Post #7
1653C3 and I have 8 of them. £1.89 each so to take into account getting bummed by PayPal etc call it £3________________________________________ How to do a clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & = |
|
Posted 17th Dec 2015 at 19:28
|
|
|
prism7guy
Seasoned Pro  Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,640 Status: Offline |
Post #8
I thought the inlet manifold to head gaskets were nla from pug. I ended up getting a thermatec one for my car when i needed one, really helpful bloke who i dealt with made me a custom one to my spec for reasonable money. ________________________________________ Goldie the track car. |
|
Posted 17th Dec 2015 at 19:53
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #9
Inlet gaskets are NLA, I bought one earlier this year and they got it off another dealer... Said they could no longer get them...________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!  |
|
Posted 17th Dec 2015 at 23:46
|
|
|
prism7guy
Seasoned Pro Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,640 Status: Offline |
Post #10
I got a standard paper type gasket in a head gasket kit that i bought, cant remember the brand of the gaskets but it was sourced by a local engine builder who skimmed a head for me. I had a nightmare trying to find anywhere to supply the inlet gasket on its own. ________________________________________ Goldie the track car. |
|
Posted 18th Dec 2015 at 14:31
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #11
jeffers wrote: Inlet gaskets are NLA, I bought one earlier this year and they got it off another dealer... Said they could no longer get them... Maybe so, but someone is cutting gaskets and selling them on ebay for the gti6 engine. They're a bit thicker than the standard paper one. ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 18th Dec 2015 at 16:17
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #12
Thanks to Mark for sorting me out.________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 19th Dec 2015 at 10:10
|
|
|
Nose
Senior User  Location: Birmingham Registered: 23 Jun 2013 Posts: 994 Status: Offline |
Post #13
Hi guys, PAYEN still list and carry both the inlet and exhaust manifold gaskets if this helps anyone?Inlet = JD536 Exhaust = JD539 cheers  ________________________________________ Bianca 306 Rallye.Mondeo Titanium X. |
|
Posted 19th Dec 2015 at 10:38
|
|
|
prism7guy
Seasoned Pro Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,640 Status: Offline |
Post #14
Ahh, that's just jogged my memory, it was a payen gasket kit that i got mine in ________________________________________ Goldie the track car. |
|
Posted 19th Dec 2015 at 11:39
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.