Surface rust but all ok apart from missing one hanger on the Center section which can easily be re added
£250 for manifold (£600 new)
£100 for system located in Oxfordshire
Open to offers
blandy has attached the following image:
![]() ![]() ![]() ![]() ![]() |
displaying posts 1 to 12 of 12
Author | Subject: Maniflow 4-2-1 maifold and exhaust |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #1
Have a maniflow “race” 4-2-1 manifold just removed from car along with system Surface rust but all ok apart from missing one hanger on the Center section which can easily be re added £250 for manifold (£600 new) £100 for system located in Oxfordshire Open to offers blandy has attached the following image: |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2
System blandy has attached the following image: |
![]() |
![]() Senior User ![]() Location: East Mids Registered: 02 Sep 2006 Posts: 860 Status: Offline |
Post #3
Will this decat? What other benefits does the system offer?________________________________________ CLUB BLACK RALLYE||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar|| |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #4
Yes being the race manifold it comes to where the Center section joins. Improved bhp/torque. Haven’t had this tested as putting the car to standard as only just brought but I had the same manifold on my track car previously which made a big difference along with throttle bodies |
![]() |
![]() Senior User ![]() Location: East Mids Registered: 02 Sep 2006 Posts: 860 Status: Offline |
Post #5
No good for road car?________________________________________ CLUB BLACK RALLYE||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar|| |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #6
The car it just came off was a road car ![]() |
![]() |
![]() Seasoned Pro ![]() Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #7
Fantastic manifold I ran this manifold (same) on my car it won’t run a cat and you will gain a few bhp high mid - to top rev range ....I put a larger mid section box and larger rear box on mine to get it to 89dbs |
![]() |
![]() Seasoned Pro ![]() Location: Durham Registered: 20 Oct 2008 Posts: 8,716 Status: Offline |
Post #8
Wouldnt mind one for the van. Had one on my old nile 6 with VLR inlet________________________________________ Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & = |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #9
It’s there if you want it ![]() |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #10
Open to offers |
![]() |
![]() Seasoned Pro ![]() Location: Durham Registered: 20 Oct 2008 Posts: 8,716 Status: Offline |
Post #11
PM'd________________________________________ Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & = |
![]() |
![]() Seasoned Pro ![]() Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #12
Manifold gone |
![]() |
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.