displaying posts 1 to 18 of 18

Author Subject: 1905 low comp bottom end for High Boost
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #1
0.5mm oversize pistons and liners making 1928cc IIRC

Wossner Pistons

Std rods

Mint unground crank

New unused bearings

ARP over size Head studs

BTCC-based sump baffling

This made 250bhp as a 1580cc engine with a std GTI6 head and C30/94 Rotrex.

Rebuilt as a 1.9 the MI16 block cracked as I torqued the head down so it basically needs a new block and a std GTI6 head.
I'm pretty sure any XU5/7/9 block will do.

£500 or £800 together with complete GTI6 head.

Bespoke engine mount with Rotrex C30/94 mounting plate £150
Posted 5th Feb 2015 at 21:22
jam7922

Regular

Location: Glasgow

Registered: 22 Feb 2009

Posts: 154

Status: Offline

Post #2
Any pics if the engine mount/ mounting plate?
Posted 5th Feb 2015 at 21:22
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #3
I'll have to dig some out.
Posted 5th Feb 2015 at 21:23
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,819

Status: Offline

Post #4
the mounting brackets are different on all three types of alloy xu block, the MI bracket will only fit the MI block, the XU7 bracket is the same as an early non ac XU10, 8v mounts to the side and the front of the block is different again.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 5th Feb 2015 at 21:36
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #5
Ok cheers then it fits only an MI16 block.
Posted 5th Feb 2015 at 21:38
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #6
£500 with bare gti6 head thrown in.
Posted 17th Feb 2015 at 23:01
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #7



Posted 22nd Feb 2015 at 22:32
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #8
Would anyone care to make an offer for some or all of the above engine and mount?
Posted 10th Mar 2015 at 22:21
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #9
£400 for engine
£100 for Rotrex mount.
Posted 25th Aug 2015 at 12:01
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,819

Status: Offline

Post #10
may be interested in the std rods if the bushes are in good condition? wouldn't have any 1?9 pins in good condition too would you?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Aug 2015 at 12:06
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #11
Don't really want to split it, this price is for nothing. What are you offering for the std rods and ions which are in excellent condition?
Ash
Posted 25th Aug 2015 at 12:14
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,819

Status: Offline

Post #12
oh, which rods are in the bottom end?

no idea really on price, that's the only bit stopping me building a 1905 hybrid engine, I have literally everything else! as its an n-a build nothing else would be any use to me Sad

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Aug 2015 at 13:29
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #13
The engine has std rods in.
Posted 25th Aug 2015 at 13:39
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,819

Status: Offline

Post #14
ohh, sorry, I misread!

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Aug 2015 at 13:58
easypug

BAD SELLER

Location: Milton Keynes

Registered: 03 Aug 2007

Posts: 238

Status: Offline

Post #15
Bit of a long shot, is this engine still available?
Posted 11th Oct 2016 at 19:51
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #16
Yep
Posted 11th Oct 2016 at 21:31
easypug

BAD SELLER

Location: Milton Keynes

Registered: 03 Aug 2007

Posts: 238

Status: Offline

Post #17
Very interested in this lot complete. Have you sent you a PM.
Posted 12th Oct 2016 at 17:19
ash

Six Addict

Location: Chelmsford

Registered: 25 Mar 2003

Posts: 7,520

Status: Offline

Post #18
I dismantled this yesterday so if anyone is interested in all or some of it I'll post photos.
Posted 6th Dec 2016 at 11:41

All times are GMT. The time is now 15:17

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.