displaying posts 1 to 25 of 57

Pages (3): [1] 2 3

Author Subject: MOT Failure :(
jimmyhackers

Seasoned Pro

Location: birmingham

Registered: 14 Jun 2011

Posts: 1,098

Status: Offline

Post #1
hello all. took her in for her test today and ho ho.......big list

fail reasons

1. park brake efficieny 12% (below requirements)
2. n/s front suspension air has excessive play in ball joints
3. exhaust emmissions carbon monoxide excessive after 2nd fast idle
4. exhaust emmisiions lambda reading outside specified limits after 2nd fast idle
5. n/s rear stop lamp dim

advisories

6 and 7. front brake hose slightly deterioated
8 both front wheel bearings have slight play
9 minor oil leak
10 vehicle undersealed
11 minor exhaust blow (front section cat)
12 slight corrosion (general)


all in all not......so bad.

here are my solutions

1. i think a new set of discs and pads are in order, old ones are pretty shot
2. ive dismanteled my suspension and got some new bits and will fit them tommorrow. the dealer gave me two types of balljoint and i will ask on another thread how to identify which one i need.
3 and 4. this was my prediction for failing. mechanics said it was weird it was jumping from barely illegal to totall illegal on the reader. im gonna try a new oil petrol and air filter first, then injector clean, then reluctantly a new cat Sad
5. LED BULBS SHOULD DIE!!!

7. the rear hoses look worse than the fronts :S
8. teh bearings have as much play as a 15 year old car should have.
9. shouldnt of cleaned my engine bay so well. its like the teeniest of dribbles.
10. what does this mean? my underseals bad or my underseal is insufficient?
11. gun gum and a new clamp shoudl fix the whole
12. as much rust as you expect on a 15 year old car


feel free to give me some constructive advice, take the p**s, or etc etc

cheers guys

jim

________________________________________

the world is changed by people in sheds
Posted 8th Jul 2013 at 19:20
roland rat

Yeeeah Rat fans!

Location: Swansea

Registered: 29 Nov 2006

Posts: 22,282

Status: Offline

Post #2
Scrap it

/thread
Posted 8th Jul 2013 at 19:51
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #3
This sounds like a payday loan advert.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 8th Jul 2013 at 19:58
anth

Seasoned Pro

Location: Colchester

Registered: 04 Apr 2006

Posts: 3,651

Status: Offline

Post #4
Been looked after well Wink
Posted 8th Jul 2013 at 20:13
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline

Post #5
Sounds like a shed to be honest, this wasn't the car that had the engine catapulted out of it by any chance was it? LOL

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 8th Jul 2013 at 22:02
Lecktorious

aka G.

Location: Edinburgh

Registered: 08 Jan 2009

Posts: 920

Status: Offline

Post #6
If you had stayed on top of maintenance, you wouldn't have had half these problems Thumbs up

________________________________________

'98 Nile Blue 306 GTi 6
Posted 8th Jul 2013 at 22:12
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #7
Jimmy has not been entirely honest with us, just nicked this out of his glove box.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 8th Jul 2013 at 22:16
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #8
Laugh my ass off

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 8th Jul 2013 at 22:19
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline

Post #9
Cry

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 8th Jul 2013 at 22:20
    rich306

    Seasoned Pro

    Location: Portsmouth

    Registered: 09 Aug 2009

    Posts: 1,834

    Status: Offline

    Post #10
    :rofl !!!

    Sounds like you haven't been looking after the car mate, surely you would've noticed things like your ball joints being knackered!

    ________________________________________

    Richies Project Rallye

    Electrical work carried out in Portsmouth

    jamiek_uk2000 wrote:
    You'll need to throw money at the car. Not on parts. Just stand near your car and throw loose change at it, I find this increases performance for a short period of time
    - Top Tip!!!
    Posted 8th Jul 2013 at 22:44
    mik

    Seasoned Pro

    Location: Kent

    Registered: 17 Feb 2011

    Posts: 2,100

    Status: Offline

    Post #11
    Sounds like the knackered lambda probe has made the engine run rich which has knackered your cat. Or maybe not as I've been wrong once today. Actually I was wrong about being wrong - I was actually right so scratch that.

    ________________________________________

    Cherry Rallye SOLD

    Posted 9th Jul 2013 at 00:02
    gilesy

    Seasoned Pro

    Location: Greenwich - in that London

    Registered: 03 Apr 2006

    Posts: 5,133

    Status: Offline

    Post #12
    I wish I knew what jimmyhackers looked like

    Posted 9th Jul 2013 at 00:08
    jimmyhackers

    Seasoned Pro

    Location: birmingham

    Registered: 14 Jun 2011

    Posts: 1,098

    Status: Offline

    Post #13
    no this is the one after the car of doom.

    thanks for all the p**s taking, still waiting for some constructive advice Smile

    its a shame i havnt got any pictures of it when i purchased it Sad if you have randomly please post one.

    this cars something i most definately saved/delayed from the scrap yard, an underdog of sorts. i feel in some way i owe it to this comunity to save it after ive already written one off. thats gotta be a good thing?

    its most definately a vast improvement in its current state. originally having naff blue orange peel respray, sticky accelerator, brakes that literally didnt work, f**ked leathers, naff lexus lights, broken remote central locking, horrific rear spoiler....the list of things ive fixed goes on and on

    i missed a few....shame they were the more important things (that cost money)

    its quite hard to "test drive" a car to notice certain faults when its not allowed on the road, its never had an mot under my ownership. ive been reluctant to drive it round the block every month or so to keep it fresh with 9 points after my last soiree with a lorry

    this mot was more a test of....im fed up of fixing random things, what do i actually need to fix

    the ball joints a weird one. its seemed to be able lock itself in one of two positions but still seem "fully functional" while locked in either one :s and thats my excuse.

    the nuts and bolts problems i can fix,

    so.... ill ask. do i hope an oil, fuel and air filter fix my emmissions, or do i bite the bullet and also get a new cat? could the emmission tester be jumping up and down due to a "misfiring/blocked injector"
    are there other things to check?. im not loosing coolant or oil into the cylinders (checked plugs) and i have fited a brand new unused new lambda sensor that was purchased long ago destined for my crashed car.

    thanks again

    jim

    ________________________________________

    the world is changed by people in sheds
    Posted 9th Jul 2013 at 00:21
    jimmyhackers

    Seasoned Pro

    Location: birmingham

    Registered: 14 Jun 2011

    Posts: 1,098

    Status: Offline

    Post #14
    gilesy wrote:
    I wish I knew what jimmyhackers looked like



    i look like this http://ohinternet.com/Techno_Viking

    pray i dont know what you look like

    Smile

    ________________________________________

    the world is changed by people in sheds
    Posted 9th Jul 2013 at 00:23
    phillipm

    Seasoned Pro

    Location: Rotherham

    Registered: 15 Oct 2006

    Posts: 20,607

    Status: Offline

    Post #15
    "Front bearings have as much play as a 15 year old car should have"

    The amount you're thinking of there is 'none', even if it's 150 years old and the bearings are made from wood and leather strap...

    Your lambda sensor is/was f**ked and probably hasn't done the cat any favours.

    ________________________________________

    - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
    Email me!
    Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
    Posted 9th Jul 2013 at 00:31
    gilesy

    Seasoned Pro

    Location: Greenwich - in that London

    Registered: 03 Apr 2006

    Posts: 5,133

    Status: Offline

    Post #16
    jimmyhackers wrote:
    pray i dont know what you look likeSmile


    Unsure
    Posted 9th Jul 2013 at 00:32
    jimmyhackers

    Seasoned Pro

    Location: birmingham

    Registered: 14 Jun 2011

    Posts: 1,098

    Status: Offline

    Post #17
    loving the mot photoshopage btw.

    bmw have robbed my idea. there is a f**k load of wasted heat energy in the exhaust manifold of every car. a turbo is a waste heat recycler so the concept isnt as ludicrous as everyone seems to think.

    ________________________________________

    the world is changed by people in sheds
    Posted 9th Jul 2013 at 00:38
    jimmyhackers

    Seasoned Pro

    Location: birmingham

    Registered: 14 Jun 2011

    Posts: 1,098

    Status: Offline

    Post #18
    sorry phil. i left a few stories out as its pretty long as it is. the front bearings....have minimal/questionable/no play.

    my discussion with the garage man doing the test said they have play. i pointed out in the past ive ballached replaceing front bearings to no avail and subsequently the plays actually in the rod ends for my steering (while moving wheel/wiggling rod ends infront of him) but he stuck to his guns. and yeah that whats ended up on my certificate.

    ive p**sed you off in tha past before, i know, im sorry if ive come across as a knob. but i am. no hard feelings?

    ________________________________________

    the world is changed by people in sheds
    Posted 9th Jul 2013 at 00:50
    phillipm

    Seasoned Pro

    Location: Rotherham

    Registered: 15 Oct 2006

    Posts: 20,607

    Status: Offline

    Post #19
    jimmyhackers wrote:
    loving the mot photoshopage btw.

    bmw have robbed my idea. there is a f**k load of wasted heat energy in the exhaust manifold of every car. a turbo is a waste heat recycler so the concept isnt as ludicrous as everyone seems to think.


    The concept isn't ludricrous, it's been used on industrial and marine engines for donkey's years.
    The implementation was.

    ________________________________________

    - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
    Email me!
    Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
    Posted 9th Jul 2013 at 02:11
    owain

    Seasoned Pro

    Location: Essex

    Registered: 20 May 2009

    Posts: 9,185

    Status: Offline

    Post #20
    If I were you, personally I'd just replace pretty much everything you can - for the cost of a re-test (which I'm pretty sure they'll only do for free once, if at all) you can replace a lot of stuff.

    I'd do ball joints, all discs, handbrake cables, pads, anything else that could be dodgy. Whole lot probably won't cost you more than a couple of hundred quid, still cheaper than a basic service in a garage.

    I'd do all that, new lambda, then try the test again. If emissions are still knacked it's new cat time.

    ________________________________________

    Membership expiring soon, get in contact on our new little forum project.
    Posted 9th Jul 2013 at 07:24
    stan_306gti6 Forum Admin

    Location: Kent

    Registered: 18 Jan 2004

    Posts: 21,768

    Status: Offline

    Post #21
    Laugh my ass off @ Owain's genius MOT fail sheet...LOL

    ________________________________________

    "Supercharged - 454.1bhp/317.5lb/ft"
    Peugeot 306 GTi-6
    2000 (X), Moonstone Love
    Posted 9th Jul 2013 at 07:59
    matt evans

    Seasoned Pro

    Location: Stourbridge

    Registered: 16 Sep 2009

    Posts: 2,290

    Status: Offline

    Post #22
    I lol'd at Gilesy and Owain.... Legends both of them!

    ________________________________________

    1999 Astor Grey GTi-6 OEM+ (now gone...)
    2004 Aegean Blue 206 GTi 180 (also gone...)
    2006 Skoda Fabia vRS in Sprint Yellow

    honestly3k wrote:
    Do you wrestle for a living matt? You sound like a monster LOL


    owain wrote:
    Nothing involving a 306 can be considered worthwhile.

    Posted 9th Jul 2013 at 08:28
    blacky

    Junior User

    Location: castleford

    Registered: 13 Jul 2012

    Posts: 80

    Status: Offline

    Post #23
    Try spraying some ad blue up the exhaust just before you take it for test,literally outside the garage,should sort it untill you can get yourself a new cat,ad blue is what we use on the wagons to keep the emmisions down so we can go into london,its just a trick i heard
    Posted 9th Jul 2013 at 09:27
    rich306

    Seasoned Pro

    Location: Portsmouth

    Registered: 09 Aug 2009

    Posts: 1,834

    Status: Offline

    Post #24
    Like already said mate, replace everything that you can to get it through, she's obviously worth it to you!
    You can't unfortunately question what's been put down on the fail sheet until you know it's been replaced and is sound.

    ________________________________________

    Richies Project Rallye

    Electrical work carried out in Portsmouth

    jamiek_uk2000 wrote:
    You'll need to throw money at the car. Not on parts. Just stand near your car and throw loose change at it, I find this increases performance for a short period of time
    - Top Tip!!!
    Posted 9th Jul 2013 at 11:06
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,817

    Status: Offline

    Post #25
    Laugh my ass off

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 9th Jul 2013 at 11:07

    Pages (3): [1] 2 3

    All times are GMT. The time is now 05:48

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.