➜ advanced search
Add a more detailed reply Start a new thread in the Engines forum
Home -> Forums -> Engines -> Examples of induction?

displaying posts 101 to 118 of 118

Pages (5): first .. 3 4 [5]

Author Subject: Examples of induction?
daver6

Seasoned Pro

Location: Durham

Registered: 08 Aug 2010

Posts: 2,379

Status: Offline
Post #101
stan_306gti6 wrote:
eliotrw wrote:
When you say de resonated, do you mean the bit on the side of the actaul box if gone,
Or have you remove the hemzoltz thing on the inlet?


He means the resonator on the side of the airbox not the bit under the manifold. Wink


^^ This

I have actually made a bung for the manifold, but it's only my spare mani. Can't really be bothered to fit it

________________________________________

Red Rallye - Rolling "restoration"

Wishbone Polybushes available
Posted 3rd Dec 2012 at 23:42
Profile
miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline
Post #102
Any air duct near the ground is bad unless it's a Race car,
Having driven thru some Floods in my 306 it did fine, Just above the bottom of the doors on the car, Hate to think otherwise

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,
Posted 3rd Dec 2012 at 23:50
Profile
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline
Post #103
Don't listen, do you kev? Come over as a bit of an idiot on this one. Rolling road figures really mean very little, however if you are happy then so be it.

________________________________________

Nothing to see here
Posted 3rd Dec 2012 at 23:50
Profile
coskev

Seasoned Pro

Location: Oswestry

Registered: 01 Nov 2009

Posts: 3,132

Status: Offline
Post #104
adam b wrote:
Don't listen, do you kev? Come over as a bit of an idiot on this one. Rolling road figures really mean very little, however if you are happy then so be it.


I'm happy thanksThumbs up

Any of the experts on here are welcome to drive my car and see what they thinkBig grin

If it was just my car on the rollers I agree figures can be misleading/alot different from one set of rollers to another.
But it was on a rolling road day with a few Gti6's to compare to,so if my inlet was affecting my car in a bad/loosing power way it would have showed up against similar cars on the daySmile

Pvfcpug 205 mi16 180bhp
Sorrentopete 306 rallye 178bhp
Madscientist 205 2.2gti6 191bhp
Cos kev 306 rallye 180bhp
Scaniarob 205 mi16 155bhp
Cooper666 306 gti6 171bhp
JJ20 205 mi16 167bhp
Craigoodwood Volvo T5 209bhp
D7ve_b Audi s3 217bhp
Geezerdiamond 205 Roland Garros 85bhp
Bukosgti6 306 gti6 162bhp
Vipergti 306 gti6 162bhp
Kelly 306 gti6 167bhp
No guts no glory 205 twin v6 221bhp
Monty-69 306 gti6 172bhp
David Todd 205 gti6 160bhp
Midlife Corolla T sport 203bhp
Herman 205 gti6 179bhp
RichS S1 106 rallye 99bhp
Tommy_a Seat leon cupra 320bhp
Marksorrento205 306 rallye 163bhp

________________________________________

Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........

Mac1 ZR R1 kit car build in progress.
Posted 4th Dec 2012 at 21:16
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #105
And as I said, you'd never tell ANYTHING on the rollers as you don't have enough airflow to generate the ram air effect to anything that would ever show up on a dyno.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 5th Dec 2012 at 12:05
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #106
out of all those results, the one that stands out for me is madproffessors 2.2 onyl making 191hp???

Really?
You can get that will cams? I'd have thought that it must make some decent torque to make up for it?

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 5th Dec 2012 at 12:40
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #107
daver6 wrote:
stan_306gti6 wrote:
eliotrw wrote:
When you say de resonated, do you mean the bit on the side of the actaul box if gone,
Or have you remove the hemzoltz thing on the inlet?


He means the resonator on the side of the airbox not the bit under the manifold. Wink


^^ This

I have actually made a bung for the manifold, but it's only my spare mani. Can't really be bothered to fit it


I may have asked you this before, But did you weld it shut or have you made something to blank it off?

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 5th Dec 2012 at 12:41
Profile
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline
Post #108
Iirc correctly they are a small threaded bung mate

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 5th Dec 2012 at 13:57
Profile
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline
Post #109
Yes, they are a bung which you use to blank it off if you wish to remove the Helmholtz resonator. Yes

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 5th Dec 2012 at 14:02
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #110
Where on about the airbox though.
Not the inlet

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 5th Dec 2012 at 14:03
Profile
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline
Post #111
Ah I see, I thought you were talking about the bung underneath the manifold. Doh

Not sure what people use to block off the airbox, probably fabricate something I would imagine.

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 5th Dec 2012 at 14:05
Profile
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline
Post #112
Oh I thought the same as stan, no idea I'm afraid Dunno

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 5th Dec 2012 at 14:08
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline
Post #113
eliotrw wrote:
out of all those results, the one that stands out for me is madproffessors 2.2 onyl making 191hp???

Really?
You can get that will cams? I'd have thought that it must make some decent torque to make up for it?


there were serious issues with that engine, namely the piston suppliers making a right royal f**kup with the design and ending up with 13-1. compression, suffice to say the replacement 2.2 will be about 75 bhp up on that roughly.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 5th Dec 2012 at 14:09
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #114
Reason I ask is my vent thing is not fully on, and I cant easily seem to line it up again.
So i fugured it just slap something ove rthe hole and take it off.

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 5th Dec 2012 at 14:15
Profile
aaron6

Seasoned Pro

Location: On the sofa in maidstone

Registered: 16 May 2006

Posts: 5,840

Status: Offline
Post #115
stan_306gti6 wrote:
Ah I see, I thought you were talking about the bung underneath the manifold. Doh

Not sure what people use to block off the airbox, probably fabricate something I would imagine.
The 2 I've have had a turned bung welded in. Wink

________________________________________

See the sheer power and might of the lesser known burrowing owl.



Posted 5th Dec 2012 at 15:16
Profile
peetypug

Seasoned Pro

Location: Spooning marksorrento205

Registered: 20 Feb 2011

Posts: 1,869

Status: Offline
Post #116
welshpug! wrote:
eliotrw wrote:
out of all those results, the one that stands out for me is madproffessors 2.2 onyl making 191hp???

Really?
You can get that will cams? I'd have thought that it must make some decent torque to make up for it?


there were serious issues with that engine, namely the piston suppliers making a right royal f**kup with the design and ending up with 13-1. compression, suffice to say the replacement 2.2 will be about 75 bhp up on that roughly.


Was just going to say that, I can't wait for him to fit the fecking engine!!

________________________________________

Cherry rallye - DOB Thursday 29/04/1999
Team Rallye - the leaner, meaner, better looking sister of the GTI6 Big grin
roland rat wrote:
You sir either live for the 6 or have a mental retardation to still be repairing this!

The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fecking temperamental. 
Posted 5th Dec 2012 at 15:46
Profile
heliosphan

Senior User

Location: UK

Registered: 14 Sep 2007

Posts: 949

Status: Offline
Post #117
This one's ringing alarm bells for me:

Craigoodwood Volvo T5 209bhp

Bummer... Sad
Posted 5th Dec 2012 at 16:16
Profile
daver6

Seasoned Pro

Location: Durham

Registered: 08 Aug 2010

Posts: 2,379

Status: Offline
Post #118
eliotrw wrote:
Where on about the airbox though.
Not the inlet


Like I said, I made bungs for each. Basically an aluminium top-hat affair with an o-ring to secure.

If you were to blank off the airbox resonator, you'd have to weld a plate in as the main 'box has a take off pipe, which connects to the resonator.

My bung basically sits in the end of the take off pipe where the resonator once was

________________________________________

Red Rallye - Rolling "restoration"

Wishbone Polybushes available
Posted 10th Dec 2012 at 20:12
Profile
Home -> Forums -> Engines -> Examples of induction?

Pages (5): first .. 3 4 [5]

All times are GMT. The time is now 06:30

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.