Post #1
Has anyone managed to re-install a dash with a custom cage fitted? Pics would be helpful as well as any tips, iv already trashed 2 trying to get it to fit and look tidy!
|
displaying posts 1 to 24 of 24
| Author | Subject: Dash with custom cage |
 pugheaven
Seasoned Pro  Location: Fareham Registered: 17 Dec 2006 Posts: 4,602 Status: Offline |
Pics would be helpful as well as any tips, iv already trashed 2 trying to get it to fit and look tidy! |
 Posted 29th Nov 2011 at 12:54
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
depends what cage it is.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 29th Nov 2011 at 12:57
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #3
Here..... DaveandJimscar________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!  |
|
Posted 29th Nov 2011 at 16:31
|
|
|
pugheaven
Seasoned Pro Location: Fareham Registered: 17 Dec 2006 Posts: 4,602 Status: Offline |
Post #4
Thanks, that look tidy, dash number 3 this weekend then! |
|
Posted 30th Nov 2011 at 08:59
|
|
|
simonjames
Seasoned Pro  Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #5
I got a safety devices multi cage    ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
|
Posted 30th Nov 2011 at 10:27
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #6
Allot of cutting and if fitted with the dash bar no heater, The front Triangulation might get in the way of the wiper motor depending on who installed it ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 30th Nov 2011 at 21:15
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #7
 mine has front triangulation mine has been pushed as far to the shell as possible [altered a lot from standard] and i also have the dash bar, going right through the steering column to both sides. i have ditched the heater. the dash was cut at the foot and the sides as you see above, purely to make it as neat as possible. ignore the fusebox, it's just relocated. but i imagine you'll have to do some work lower down to mount the bottom of the dash because the A hoops will be in the way infact mine is modifed in such a way i'd call it anything BUT a custom cages' cage! because all the doorbars and everything have been redone and aligned properly. look at all the other custom cages - the doorbars are p*ssed and much higher at the B pillar than the A pillar. mine are out but nowhere near as much as the normal kit ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 30th Nov 2011 at 22:58
|
|
|
aphyx
Regular  Location: Castle Cary Registered: 26 Feb 2010 Posts: 403 Status: Offline |
|
|
Posted 30th Nov 2011 at 23:16
|
|
|
cjm_harris
Seasoned Pro  Location: Parts for Sale section Registered: 04 Dec 2007 Posts: 7,442 Status: Offline |
Post #9
I think Rikky or Simon need to sell me their bucket seats  ________________________________________ Chris1999 China Gti6 Supercharged  [Fun car] >>Project Thread<<2000 Bianca 306 Diesel [Work runabout] |
|
Posted 30th Nov 2011 at 23:19
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #10
I'd sell the whole car for a reasonable price because I want something new ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 30th Nov 2011 at 23:24
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #11
rikky wrote: the doorbars are p*ssed and much higher at the B pillar than the A pillar. mine are out but nowhere near as much as the normal kit 's 'cause they didn't fookin' fit even on the p*ss  They all met together in the middle, provided you allowed the middle to be somewhere roughly within 8 inches of each other at best. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 1st Dec 2011 at 01:31
|
|
|
cjm_harris
Seasoned Pro Location: Parts for Sale section Registered: 04 Dec 2007 Posts: 7,442 Status: Offline |
Post #12
rikky wrote: I'd sell the whole car for a reasonable price because I want something new I cant afford the whole car and have no room to strip it for bits. Yours is a very well sorted track car, but I'm getting there with mine. You need to man up and take it out before selling it!  Then when you do want to sell, sell me the buckets ________________________________________ Chris1999 China Gti6 Supercharged [Fun car] >>Project Thread<<2000 Bianca 306 Diesel [Work runabout] |
|
Posted 1st Dec 2011 at 08:39
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #13
no time to at the moment whatsoever, it's sat in my garage since xmas. only took it out to be MOT'd and that's it. i was going to break it up but i can't be arsed with the shell left cos that'll be the hardest bit to shift. i did put it up for like 3k a bit ago but i'd take much less than this. by the time you've even thought about a decent cage you are into a grand and then buckets, harnesses, polycarbs, the list is endless. i would have saved money buying an ex btcc car i was toying with the idea of gutting it back to bare shell again and fully phase3-ing it but i quite like the p1 style ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 1st Dec 2011 at 08:49
|
|
|
cjm_harris
Seasoned Pro Location: Parts for Sale section Registered: 04 Dec 2007 Posts: 7,442 Status: Offline |
Post #14
Looks the dogs bo***cks as it is mate, so I wouldnt change it to phase 3. There was a guy that did that, but then went over the top with it. Sprayed it yellow and all sorts Yeah I was tempted to buy it when you put it up for sale, but I would of had to of gutted and sold one of them, and dont think I could of done it! ________________________________________ Chris1999 China Gti6 Supercharged [Fun car] >>Project Thread<<2000 Bianca 306 Diesel [Work runabout] |
|
Posted 1st Dec 2011 at 08:56
|
|
|
simonjames
Seasoned Pro Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #15
cjm_harris wrote: I think Rikky or Simon need to sell me their bucket seats I have a brand new pair sat in my shed i could be persuaded to part with ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
|
Posted 1st Dec 2011 at 09:01
|
|
|
clen666
Seasoned Pro  Location: Co. Durham Registered: 12 Feb 2009 Posts: 2,401 Status: Offline |
Post #16
What model Simon?________________________________________ Team 'unintentional rat look' |
|
Posted 1st Dec 2011 at 09:10
|
|
|
cjm_harris
Seasoned Pro Location: Parts for Sale section Registered: 04 Dec 2007 Posts: 7,442 Status: Offline |
Post #17
simonjames wrote: cjm_harris wrote: I think Rikky or Simon need to sell me their bucket seats I have a brand new pair sat in my shed i could be persuaded to part with Brand new pair of the same buckets?  I dont mind buying second hand if they are in good nick (which yours seem to be) as it saves me some pennies ________________________________________ Chris1999 China Gti6 Supercharged [Fun car] >>Project Thread<<2000 Bianca 306 Diesel [Work runabout] |
|
Posted 1st Dec 2011 at 09:23
|
|
|
simonjames
Seasoned Pro Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #18
Sparco REV's iirc brand new still in wrapping i paid £400 for them so would sell for the same, the 1s fitted in my car are in good/average condition there are a few nicks here and there but i'd sell them for £200 ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
|
Posted 1st Dec 2011 at 11:31
|
|
|
cjm_harris
Seasoned Pro Location: Parts for Sale section Registered: 04 Dec 2007 Posts: 7,442 Status: Offline |
Post #19
simonjames wrote: Sparco REV's iirc brand new still in wrapping i paid £400 for them so would sell for the same, the 1s fitted in my car are in good/average condition there are a few nicks here and there but i'd sell them for £200 How about you put your new shiny ones in the Rallye, and sell me the ones currently in it for £200?  ________________________________________ Chris1999 China Gti6 Supercharged [Fun car] >>Project Thread<<2000 Bianca 306 Diesel [Work runabout] |
|
Posted 1st Dec 2011 at 11:41
|
|
|
simonjames
Seasoned Pro Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #20
i could be persuded will just need a few weeks to decide on if i do the other car that i'd bought the seats for ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
|
Posted 1st Dec 2011 at 12:15
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #21
rikky wrote: I did put it up for like 3k a bit ago but i'd take much less than this.  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 1st Dec 2011 at 12:27
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #22
 you can have it for 3k if you feel generous ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 1st Dec 2011 at 12:39
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #23
how much would be missing fro it?I'd love it but I know a mate that may want to build a 2.2 S16/gti6 to go into a 306. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 1st Dec 2011 at 12:57
|
|
|
aphyx
Regular Location: Castle Cary Registered: 26 Feb 2010 Posts: 403 Status: Offline |
Post #24
rikky wrote: you can have it for 3k if you feel generous I cant believe you've put that much effort into it and haven't even given it a proper run it!  Wait until the new year, take it out on a track and see how she does? ________________________________________ Onward to the Edge! |
|
Posted 1st Dec 2011 at 18:13
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.