Post #101
Hello, is there any1 who can help with my wheels issues?
|
| Author | Subject: C5 steel wheels |
 reject.ed
Newbie  Location: retford Registered: 21 Feb 2009 Posts: 5 Status: Offline |
|
 Posted 21st Jul 2009 at 01:43
|
|
|
spiky
Seasoned Pro  Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #102
i run a stud and nut conversion,am i going to be able to fit these? ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP  268+BHP and 860kg = FUN |
|
Posted 10th Aug 2009 at 17:04
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #103
if you have tapered nuts yes edit, and don't have the early recalled flat faced versions of them, these are fairly rare though as they were the ones prone to cracking. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 10th Aug 2009 at 17:23
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #104
cant rememeber what i have, will check  ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 10th Aug 2009 at 17:23
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #105
cheers on the edit info too ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 10th Aug 2009 at 17:24
|
|
|
monty-69
Senior User  Location: Colne Registered: 02 Jul 2006 Posts: 790 Status: Offline |
Post #106
Spiky only use spinning taper bolts/nuts washers on the c5 alloy "steelies" |
|
Posted 10th Aug 2009 at 17:40
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #107
vts_tibi wrote: it's spot on! Cheers!from service.citroen.com : 5405 72 needed: 16 12X125 STEEL WHEELS CONICAL SURFACE / SPANNER DIAM 17  anyone got 1 nut that they can send me so i can test they fit on my stud and nut conversion? ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 9th Sep 2009 at 17:38
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #108
they're just a standard peugeot/citroen taper nut as far as i know,I borrowed one of these wheels and they fitted fine with my ZX's standard wheelbolts (my alloys use tapered bolts)still after a set of them myself too, though I haven't looked too hard at the moment. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th Sep 2009 at 18:00
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #109
my mate has 10..lolwell 8 now as i stole two will get another 7 and i'm sorted just want to test a nut before i order a set fit over gti6 braks fine too ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 9th Sep 2009 at 18:02
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #110
10  fancy nabbing 4 for me  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th Sep 2009 at 18:42
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #111
lol.. no chance he keeping 8 for his 205i need 7 more for 2 sets and 1 spare r888 i take to track days ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 9th Sep 2009 at 18:44
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #112
bugger! where do you get them?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th Sep 2009 at 18:51
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #113
when i got my 7 i will tell you...lol10 each too ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 9th Sep 2009 at 19:03
|
|
|
lotek
Seasoned Pro  Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #114
ive taken mine off for now, but before i put them back i think il need spacers ??15" ET18 6J = C5 alloys et19 = cyclones! what size spacers are needed. or are they not needed.? they felt ok on the car before but id imagine it wont do the car any good? |
|
Posted 17th Sep 2009 at 21:59
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #115
Not needed - it's only 1mm ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 18th Sep 2009 at 00:02
|
|
|
lotek
Seasoned Pro Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #116
|
|
Posted 18th Sep 2009 at 00:06
|
|
|
jon boy
Regular  Location: high wycombe Registered: 24 May 2008 Posts: 202 Status: Offline |
Post #117
markoblaze6 wrote: whilst doing some searching i came across this bit of info from the 205gti forum
The following are actually alloy wheels, but look like steelies. They are all 15" diam and 6" wide, and I think they are all ET19, so basically a direct replacement on the 205. GTi6 steel wheels - part number 5401 H7 - |
|
Posted 21st Oct 2009 at 18:07
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #118
look at the prices ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 21st Oct 2009 at 18:13
|
|
|
lotek
Seasoned Pro Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #119
ask for the ones that are named HUNGARO they are the correct ones and are on average 70 quid eatch. |
|
Posted 21st Oct 2009 at 18:24
|
|
|
jon boy
Regular Location: high wycombe Registered: 24 May 2008 Posts: 202 Status: Offline |
Post #120
lotek wrote: ask for the ones that are named HUNGARO they are the correct ones and are on average 70 quid eatch. Bugger. i was hoping it would be the cheaper ones. Thanks for the response  |
|
Posted 21st Oct 2009 at 18:33
|
|
|
lotek
Seasoned Pro Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #121
god mine are so underpriced ! lol  |
|
Posted 21st Oct 2009 at 18:37
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #122
they cheap to get i bought mine at 10 each, i have 6 now and mate hace 9, i just been offered 4 for 80 trying to get more..lol than that at a better price too ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 21st Oct 2009 at 18:41
|
|
|
lotek
Seasoned Pro Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #123
you c5 whore .. lol |
|
Posted 21st Oct 2009 at 18:43
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #124
dude, its shocking..lol________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 21st Oct 2009 at 18:48
|
|
|
pugheaven
Seasoned Pro  Location: Fareham Registered: 17 Dec 2006 Posts: 4,602 Status: Offline |
Post #125
so are the 16" ones alloy and four stud?Thanks |
|
Posted 21st Oct 2009 at 22:55
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.