|
| Author | Subject: MY 205 GTI-6 Supercharged Track car |
 spiky
Seasoned Pro  Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #226
i cant see it being much, if any thing,i still havent put ducts in from the front vents to the brakes, so once they done, they should be cooler if anything  ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP  268+BHP and 860kg = FUN |
 Posted 30th Nov 2009 at 01:57
|
|
|
rapidcossie
Regular  Location: falkirk Registered: 30 Jun 2009 Posts: 332 Status: Offline |
Post #227
i find from going from cylcones to 1.9 speedlines that the wheels hold FAR more heat.On daves 350 bhp turbo 205 he had brake failure after about 5 or 6 laps even on the aclon 4 pots 310 mm discs and SRF fluid. he switched from speedlines to pro 1.2 and his brakes now fine after 10 laps. I belive this is due to the smaller holes in the speedlines design. you new wheels looks even worse than the speedlines. Just a thouht. |
|
Posted 30th Nov 2009 at 03:19
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #228
he said his brake failure was due to MC?________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 30th Nov 2009 at 03:22
|
|
|
rapidcossie
Regular Location: falkirk Registered: 30 Jun 2009 Posts: 332 Status: Offline |
Post #229
sorry I meant the complete failure when we rolled was due to that but even after that with new master etc he could still fade brakes to near dangeroues levels UNTIL he swapped the wheels. |
|
Posted 30th Nov 2009 at 03:27
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #230
if he can only do 5 laps of a tiny circuit, i would suggest he re looks at his cars braking system, i really fail to believe that the wheels changed that.he has a more fundemnetal issue ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 30th Nov 2009 at 03:35
|
|
|
rapidcossie
Regular Location: falkirk Registered: 30 Jun 2009 Posts: 332 Status: Offline |
Post #231
all of the high powered 205's that lap KH can only really manage 6 or 7 laps before having some pretty serous brake overheating issues.most run 4 pots with larger discs and good pads but dave is the only one to run and after market style wheel. |
|
Posted 30th Nov 2009 at 03:50
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #232
two more vidsVideo 3 Video 4 ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 30th Nov 2009 at 03:56
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #233
well decided to get a nice accurate Rev counter i will eventually get rid of the 205 in place of accurate gauges, so one by one they will go what you think of this idea?    ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 13th Dec 2009 at 15:24
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #234
and here it is finished not bad for 10mins work   ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 13th Dec 2009 at 15:47
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #235
Looks really neat in there mate. Is it cheaper to go for all individual guages like that then? Or is it better to bite the bullet and get a complete dash unit like Race Technology or Stack for instance?________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 13th Dec 2009 at 16:01
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #236
complete dashs are 500ish maybe more i have thought about it, many a times too. but decided to go this route instead, plus most gauges i will but will be second hand so cheaper i only need speedo, fuel level, oil pressue, as i have the water/oil temp one ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 13th Dec 2009 at 16:04
|
|
|
rapidcossie
Regular Location: falkirk Registered: 30 Jun 2009 Posts: 332 Status: Offline |
Post #237
looks cool! |
|
Posted 13th Dec 2009 at 16:23
|
|
|
nc23
Regular  Location: Bristol Registered: 09 Oct 2008 Posts: 369 Status: Offline |
Post #238
"Perfect bush - keep it trimmed and tidy"  ________________________________________ ’00 Moonstone GTi6My Flickr Photostream |
|
Posted 13th Dec 2009 at 16:27
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #239
I had mine like that 10 years ago, LOL The Stack ones fit slightly better as the dia is abit smaller ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 13th Dec 2009 at 17:21
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #240
decided to spent a little on the dash againobviously not finished, but you get the idea, shame i cant get 2 gauges in there  so will blank off the rest, happy with that though (these are my spare 309 clocks, i'm cutting up) when i'm happy will just fit these and keep my 205 ones spare    ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 16th Dec 2009 at 00:56
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #241
here is whats left of my front pads.... lol    ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 16th Dec 2009 at 03:28
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #242
We had ours tyres swapped over today, no pics of mine, but here are pauls   ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 17th Dec 2009 at 01:30
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #243
well, finally sorted my wheels and had them swapped over onto the C5 wheels (3 sets now..lol ) slicks will go on the third set gave it a wash in the rain today, and cleaned off all the rubber, it dont look half bad clean ready for mallory next week what you think? good or bad?    ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 16th Jan 2010 at 20:31
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #244
Quick Vidquick crapy video trying to setup the mic on the car. this is on a private road of course unsure who was driving ....lol ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 20th Jan 2010 at 13:51
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #245
here are some of the vids fom the weekend, still some more to edit and upload, Video 1 Video 2 Video 3 Video 4 Video 5 ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 26th Jan 2010 at 14:06
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #246
here are some more vids from the day Video 6 Video 7 Video 8 Video 9 Video 10 ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 28th Jan 2010 at 01:52
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #247
I now purchased a set of Genuine PTS Bilteins front's (except inserts, as i already have bilsteins inserts)i bought these as my current compbrake bodies, wouldnt let me lower the car enough, without bottoming out. and as you can see the bodies are around 30mm shorter, so solvers my problem      ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 29th Jan 2010 at 21:52
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #248
after sending back my adj microphone as it was faulty, i bought a different version, a condensor Mic, so been out playing tonight, tryting to find the best location for the michere is a small vid of it sat in near the wiper motor, do you think it's to much engine noise? also like the new camera location? it's sat in the aerial bolt hole Small video ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 2nd Feb 2010 at 03:24
|
|
|
gman
Seasoned Pro  Location: Didcot Registered: 25 Oct 2007 Posts: 1,471 Status: Offline |
Post #249
Looking good Spikey. The vids really show how quick it is once you get chance to open up on the straights!________________________________________ 1992 Onyx Black 205 GTI-62005 Honda S2000 (Sold) 2002 Audi S3 (Sold) 2005 Clio 182 Trophy (sold) |
|
Posted 2nd Feb 2010 at 03:30
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #250
cheers, does go ok, that was just 2nd and 3rd...lol should have kept going i guess will do more testing soon, on some awesome roads up by me your loom is finished by the way  ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 2nd Feb 2010 at 03:56
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)