displaying posts 51 to 75 of 133

Pages (6): first .. 2 [3] 4 .. last

Author Subject: 4 Pot Conversions
rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #51
martinj wrote:
Hi,

No change to the master cylinder, the car still runs a servo but no abs. Once the tyres are up to temperature on an event the brakes are unbelievable, I needed to pull in lap belts on my harness as I was moving forward in the seat under braking.

Martin


Laugh Sounds familiar Yes My dad borrowed my Rallye once i had finished my setup and jokingly said he was going to sue me for whiplash afterwards LOL Only needs a tiny amount of pressure to stop, quite crazy! Ninja

________________________________________

Just Drive It
Posted 15th Dec 2008 at 17:34
dannygti-6

Senior User

Location: under a car!!!

Registered: 17 Nov 2007

Posts: 517

Status: Offline

Post #52
Nico what wheels are those brakes under ????

________________________________________

Xbox Live = Sp4n

Team one gti-6 - 2 cherry rallye's
Posted 10th Jun 2009 at 21:36
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #53
dannygti-6 wrote:
Nico what wheels are those brakes under ????


I think they are 206 RC wheels!

that's called as 206 GTI180 there

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 10th Jun 2009 at 22:18
robertinho

Newbie

Location: São Paulo, Brazil

Registered: 08 Mar 2009

Posts: 43

Status: Offline

Post #54
anybody know if the 607 V6 brembo disc calliper fit on a zx 16v? it's really necessary use 17"?
Posted 18th Jun 2009 at 07:00
nicopug

Junior User

Location: France

Registered: 10 Oct 2004

Posts: 59

Status: Offline

Post #55
607 calipers and discs won't fit on a 306.

The best you could choose are 807 V6 calipers with 307 hdi 136hp/307 180hp discs and subaru STI pads Ninja

Here is my actual set up :









With EBC discs and pads

________________________________________

Nico from France, with a lot of Lions
Posted 29th Jun 2009 at 13:12
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #56
Subaru STI pads are a bit pricey! I know! Mellow

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 30th Jun 2009 at 00:05
hman205

Regular

Location: Bristol

Registered: 27 Jun 2005

Posts: 313

Status: Offline

Post #57
I have recently got some Brembo's for a Honda S2000 Gran Turismo kit they are rather large and im guessing they will need a 330mm disc size what wheels are people running with brakes of this size?

________________________________________

Another Broken one

Posted 30th Jul 2009 at 18:56
rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #58
Er.... Nico.... there is a massive crack in your wheel Sad

________________________________________

Just Drive It
Posted 30th Jul 2009 at 19:00
rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #59
hman205 wrote:
I have recently got some Brembo's for a Honda S2000 Gran Turismo kit they are rather large and im guessing they will need a 330mm disc size what wheels are people running with brakes of this size?


You will be able to squeeze them under a decent set of 17's Yes

________________________________________

Just Drive It
Posted 30th Jul 2009 at 19:01
106lad

Seasoned Pro

Location: Northern Ireland

Registered: 12 Feb 2007

Posts: 3,977

Status: Offline

Post #60
rallyestyle wrote:
Er.... Nico.... there is a massive crack in your wheel Sad


i think thats just brake dust

________________________________________

Bianca White Ph2 306 GTi-6 Sold
Phoenix Yellow E46 ///M3
E36 M3 Imola Individual GT2
Team: 321bhp


07/11/08 - Pete Sims, gone but not forgotten, RIP
Posted 31st Jul 2009 at 01:02
rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #61
106lad wrote:
rallyestyle wrote:
Er.... Nico.... there is a massive crack in your wheel Sad


i think thats just brake dust


You think? Looks really clear as a crack to me Doh

Im hoping its juat a spare he was using to test if it fitted or not Smile

________________________________________

Just Drive It
Posted 31st Jul 2009 at 14:11
rikky 🦔

Location: cheshire

Registered: 28 Feb 2004

Posts: 26,793

Status: Offline

Post #62
thats normal them lines with brake dust and shit buildup, i get it all the time and have to autoglym degrease them off LOL

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]
Posted 31st Jul 2009 at 14:35
mark-house

Seasoned Pro

Location: Bury St Edmunds

Registered: 07 Apr 2009

Posts: 1,096

Status: Offline

Post #63
On a completely different topic could say porche 4 pot rear brakes be converted to fit the 306?

________________________________________

Peugeot 306 GTi 6
BMW 320 td compact M-sport
1967 Mini Cooper
1990 Jaguar XJR 4.0
Posted 31st Jul 2009 at 16:00
psjunkie

Seasoned Pro

Location: Halifax

Registered: 31 Aug 2007

Posts: 1,565

Status: Offline

Post #64
i dnt c why not, that 306 in PFC has ferrari items on

________________________________________

1997 P1 Gti 6 Charged
Posted 31st Jul 2009 at 22:07
106lad

Seasoned Pro

Location: Northern Ireland

Registered: 12 Feb 2007

Posts: 3,977

Status: Offline

Post #65
Theyre not Ferrari brakes though, theyre brembos with stickers Smile

________________________________________

Bianca White Ph2 306 GTi-6 Sold
Phoenix Yellow E46 ///M3
E36 M3 Imola Individual GT2
Team: 321bhp


07/11/08 - Pete Sims, gone but not forgotten, RIP
Posted 6th Aug 2009 at 18:06
syd007

Junior User

Location: Wellington

Registered: 06 Dec 2008

Posts: 82

Status: Offline

Post #66
would any brembo caliper fit on the 306 or are calipers different? e.g would i get 350z rear brembos on a 306? sorry if im being stupid just really fancy bigger brakes!
Posted 6th Aug 2009 at 18:30
crf450

Senior User

Location: belper

Registered: 23 Mar 2005

Posts: 502

Status: Offline

Post #67
1. Compbrake B4 4 Pots with 280x26 Rotors to fit 15" (CompBrake) - 2 piece discs
2. Willwood 4 Pots with 283x22 GTI6 Discs 15" (welly)
3. 406 V6 Brembo with GTI180 285x26 Discs 15" (ash)
4. 406 V6 Brembo with Xantia 288x28 Discs 15" (?)
5. AP BTCC 4 Pots with 295x26 Rotors 15" (VLR) - 2 piece discs
6. Fiat/Alfa Brembos with 305x28 406 V6 Discs 16" (tomtomtom)
7. AP 4 Pots with 305x28 406 V6 Discs 16" (rallyestyle)
8. Brembo GT 4 pot with 406 305mm disc 16"
9. Clio 197 Brembos with 305x28 406 V6 Discs 16"(rich_w)
10. Clio 197 Brembos with 310x28 Rotors 16" (ash) - 2 piece discs
11. 406 V6 Brembo with 310x28 Rotors 16" (ash) - 2 piece discs
12. Hi Spec Billet 4 calipers on 325mm, 2 piece discs. (lee gti6)
13. GSR Inv. 4-pots with 330x26mm scolloped rotors. (PhillipM) - 3 piece discs
14. 406 V6 Brembos with 330x28 Rotors 17" (ash) - 2 piece discs
15. Compbrake Pro7 Brembos with 330x32 Rotors 17" (ash) - 2 piece discs
16. 406 V6 Brembo's with (2 piece disc, red bells..) 330x28 rotor's 17" (aknight)
17. AP CP6600 4 pot calipers and two piece AP 330x28 discs - plenty of room inside 7x17 2120 speedlines (martinj)
18. Ex SubaruWRC 4 PotAlcon's with 28mm by 300mm rotors which just sqeeze under 15's

6-pots:

1. KAD 6pots with 285x28 discs 15" (Binka & Gti6boy) - 1 piece
2.)Tarox 6-pots 310mm Belled discs, 17" TSW's (Steve_h gti6,) - 2 piece discs.





________________________________________


Quote "da g man!"
"You've only got to watch the "306 vs ringtaxi" video & you soon realise how good these mod's are! That guy is running Ash's 30mm ARB, Solid Mounts & 23mm Torsion Bars & some adjustments on the camber. Admittedly, the guy is an awesome driver, but it just go's to show how well these cars can handle with the right modification's
Posted 6th Aug 2009 at 18:42
james_r

Regular

Location: HERTS/BEDS/BUCKS

Registered: 24 Oct 2006

Posts: 388

Status: Offline

Post #68
Think Bono's Maxi has some huge Bremsports from Tweeks, like dinner plate sized brakes!!

________________________________________

Momentum is your friend, intertia your enemy
Posted 6th Sep 2009 at 23:41
nicopug

Junior User

Location: France

Registered: 10 Oct 2004

Posts: 59

Status: Offline

Post #69
New SetUp for my little T16 :























HiSpec Monster 6 calipers with 335*32 discs Ninja

________________________________________

Nico from France, with a lot of Lions
Posted 23rd Sep 2010 at 00:53
will130787

Seasoned Pro

Location: Reading

Registered: 24 Sep 2009

Posts: 3,933

Status: Offline

Post #70
crf450 wrote:
1. Compbrake B4 4 Pots with 280x26 Rotors to fit 15" (CompBrake) - 2 piece discs
2. Willwood 4 Pots with 283x22 GTI6 Discs 15" (welly)
3. 406 V6 Brembo with GTI180 285x26 Discs 15" (ash)
4. 406 V6 Brembo with Xantia 288x28 Discs 15" (?)
5. AP BTCC 4 Pots with 295x26 Rotors 15" (VLR) - 2 piece discs
6. Fiat/Alfa Brembos with 305x28 406 V6 Discs 16" (tomtomtom)
7. AP 4 Pots with 305x28 406 V6 Discs 16" (rallyestyle)
8. Brembo GT 4 pot with 406 305mm disc 16"
9. Clio 197 Brembos with 305x28 406 V6 Discs 16"(rich_w)
10. Clio 197 Brembos with 310x28 Rotors 16" (ash) - 2 piece discs
11. 406 V6 Brembo with 310x28 Rotors 16" (ash) - 2 piece discs
12. Hi Spec Billet 4 calipers on 325mm, 2 piece discs. (lee gti6)
13. GSR Inv. 4-pots with 330x26mm scolloped rotors. (PhillipM) - 3 piece discs
14. 406 V6 Brembos with 330x28 Rotors 17" (ash) - 2 piece discs
15. Compbrake Pro7 Brembos with 330x32 Rotors 17" (ash) - 2 piece discs
16. 406 V6 Brembo's with (2 piece disc, red bells..) 330x28 rotor's 17" (aknight)
17. AP CP6600 4 pot calipers and two piece AP 330x28 discs - plenty of room inside 7x17 2120 speedlines (martinj)
18. Ex SubaruWRC 4 PotAlcon's with 28mm by 300mm rotors which just sqeeze under 15's

19. Hi-spec 4 pots billet conversion with 300mm bell and rotor. Will only go under 16" wheels this way. However if you run a different Caliper bracket and 285mm discs with 10mm spacers you can get them under clones Wink

6-pots:

1. KAD 6pots with 285x28 discs 15" (Binka & Gti6boy) - 1 piece
2.)Tarox 6-pots 310mm Belled discs, 17" TSW's (Steve_h gti6,) - 2 piece discs.

________________________________________

Ex Astor 6 owner Sad

Also an Ex owner of a Bianca 6 Sad

Now an ex owner of a 2005 9-3 2.0T 210bhp Aero Swedish Saloon thing!! Soon to be 250bhp.... Superman

Now driving Mk5 Golf GTTdi, mile muncher

But still live for the 306 Ninja
Posted 23rd Sep 2010 at 02:17
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline

Post #71
406 V6 Brembo with 310x28 Rotors 16"

is that as big as you can go under 16s?

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 23rd Sep 2010 at 05:07
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline

Post #72
my mate has a 106 gti with cyclones on and he is after some 4pots, wilwoods or brembos. what fits behing the cyclones the best? he has a budget of around £350

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 29th Sep 2010 at 23:37
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline

Post #73
anyone?

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 3rd Oct 2010 at 02:59
will130787

Seasoned Pro

Location: Reading

Registered: 24 Sep 2009

Posts: 3,933

Status: Offline

Post #74
eddy_gti6 wrote:
anyone?


What's wrong with hi spec running 285mm discs??

________________________________________

Ex Astor 6 owner Sad

Also an Ex owner of a Bianca 6 Sad

Now an ex owner of a 2005 9-3 2.0T 210bhp Aero Swedish Saloon thing!! Soon to be 250bhp.... Superman

Now driving Mk5 Golf GTTdi, mile muncher

But still live for the 306 Ninja
Posted 3rd Oct 2010 at 03:52
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline

Post #75
expensive aint they, he has a budget of £350 maybe £400 max

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 3rd Oct 2010 at 05:07

Pages (6): first .. 2 [3] 4 .. last

All times are GMT. The time is now 09:26

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.