|
displaying posts 1 to 25 of 40
Pages (2): [1] 2
| Author | Subject: Anybody know of these ? |
 Day666
Seasoned Pro  Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #1
Anybody had dealings ?http://www.fastcarspares.com/?page_id=35 In Bristol but all made in France ? Maxi carbon inlet mk1 or two looks interesting & bonnet & Tailgate ? May ring them & visit tomorrow  Day666 has attached the following image: |
 Posted 25th Oct 2015 at 22:37
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
its not a shop so no point visiting...________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 26th Oct 2015 at 08:06
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #3
Going to ring first Mei .....Yea saw that ....but some of its instock somewhere ...can't all be shipped ? |
|
Posted 26th Oct 2015 at 08:53
|
|
|
rallyeash
Seasoned Pro  Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline |
Post #4
probably his home address, working from his spare room and all comes out of france.________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here309 3dr K20 Type R |
|
Posted 26th Oct 2015 at 09:40
|
|
|
RallyeP6
Regular  Location: West Byfleet Registered: 11 Jul 2013 Posts: 451 Status: Offline |
Post #5
They did have a website before?. |
|
Posted 26th Oct 2015 at 11:02
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #6
no experience of the above, but they've been around a little while.I've seen stuff from here though - http://www.maximotorsport.com/ speak to tony  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 26th Oct 2015 at 11:14
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #7
Rang Wil today who runs it ...he's a Architect & runs it as a side Line ...seems a really nice bloke ...he's really well known on the Citreon forums ...so say ....he does have a few items there for me to look at the quality of Said pop round tomorrow which I'm doing & will do a Club discount He has Citreon tailgate & bonnet & a few select other bits ....but 98% is made to order . Also something else I asked is what stuff is or can be made in Carbon & was told only small bits because of lack of Autoclave or something ... He did say the quality double skin fit is second to non...we shall see ... I'm considering GRP / Fibreglass now as I will end up getting the bonnet & Tailgate sprayed even it was Carbon ..silly I know ...but the GRP is quarter of the price & even He said why ?...I know Carbons better stiffer but my Carbon roof has faded white in places in 6months & looks terrible so I'll get it all sprayed at the same time ? His Maxi Airboxes look interesting also GRP & Carbon available ...shall take pics & post tomorrow guys |
|
Posted 26th Oct 2015 at 18:10
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #8
welshpug! wrote: no experience of the above, but they've been around a little while. I've seen stuff from here though - http://www.maximotorsport.com/ speak to tony Mei a group buy was arranged by the Dirty Derv forum Boys a few months ago as you know & the fit wasn't great some of the boys even sold them on ...Just saying  If it's him I'm not chancing it ...I'll ask |
|
Posted 26th Oct 2015 at 18:14
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #9
Visited him ..nice chap ..into his French old Matra cars ...Had a Citreon tailgate pictured below to show me ...I'm very impressed & he's getting me a picture of the maxi air box ...Grp & Carbon .... So I better get saving I want by end of Jan 2106 .. 1.full Welded in cage that goes through dash .. 2.Front Coilovers 3.Rear Tailgate Grp 4.Front bonnet Grp 5.Maxi Airbox Grp Day666 has attached the following image: |
|
Posted 27th Oct 2015 at 14:03
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #10
Day666 wrote: I know Carbons better stiffer but my Carbon roof has faded white in places in 6months & looks terrible so I'll get it all sprayed at the same time ? If it wasn't sprayed with a UV proof lacquer/polyurethane, etc, then the white is UV damage in the epoxy itself, where it's starting to break down. Get a coat of lacquer over it asap before the epoxy starts to crack and the fibres get exposed. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 27th Oct 2015 at 14:16
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #11
phillipm wrote: Day666 wrote: I know Carbons better stiffer but my Carbon roof has faded white in places in 6months & looks terrible so I'll get it all sprayed at the same time ? If it wasn't sprayed with a UV proof lacquer/polyurethane, etc, then the white is UV damage in the epoxy itself, where it's starting to break down. Get a coat of lacquer over it asap before the epoxy starts to crack and the fibres get exposed. Thanks Phil ..I'm getting it Sprayed with the bonnet & Tailgate Jan |
|
Posted 27th Oct 2015 at 14:23
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #12
carbon roof?!meh. rather a piece of steel over my head! there's a reason they're not allowed for proper motorsport. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 27th Oct 2015 at 14:25
|
|
|
Twangy
Senior User  Location: heswall Registered: 27 Jun 2014 Posts: 623 Status: Offline |
Post #13
welshpug! wrote: carbon roof?! meh. rather a piece of steel over my head! there's a reason they're not allowed for proper motorsport. exactly why have not made one for mine as have full mould but personally think it would devalue car as wouldn't be able to use for motorsport , and yes would rather have a piece of steel over my head same as you mei ________________________________________ wayne mcardle |
|
Posted 27th Oct 2015 at 14:37
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #14
the 306 roof bends p**s easily anyway  one of the reasons i stuck roof bars in my caged 306 cos the roof felt pathetic!________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 27th Oct 2015 at 14:46
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #15
Sorry my mistake .Carbon Roof Air Vent ...not roof |
|
Posted 27th Oct 2015 at 14:48
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #16
... look at all these posts you've caused unnecessarily ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 27th Oct 2015 at 14:48
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #17
welshpug! wrote: rather a piece of steel over my head! there's a reason they're not allowed for proper motorsport. You could bend the 306 roof skin with your little finger, it's about 0.6mm or something silly ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 27th Oct 2015 at 15:24
|
|
|
cj-gti6
Senior User  Location: Barnsley Registered: 09 May 2011 Posts: 799 Status: Offline |
Post #18
Aesthetically my roof is bloody marvellous - bare carbon on the underside is the absolute dogs!!!No major weight loss and 100% useless for motorsport, but I've no plans to do rallying/hill climbs etc so I'm happy as Larry!! ________________________________________ 99/S Carbon Gti-5 |
|
Posted 27th Oct 2015 at 16:24
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #19
rikky wrote: ... look at all these posts you've caused unnecessarily Ricky your so Right ....didn't mean to but it sure does put a bit of spark back into this forum |
|
Posted 27th Oct 2015 at 16:49
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #20
Just been sent this pic by Will who I met today .He's saying this is the GRP air intake box ? I've asked him to double check as it looks the nuts & Jenvey said they would Machine the hole for my bodies Day666 has attached the following image: |
|
Posted 27th Oct 2015 at 16:52
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,212 Status: Offline |
Post #21
Day666 wrote: Just been sent this pic by Will who I met today . He's saying this is the GRP air intake box ? I've asked him to double check as it looks the nuts & Jenvey said they would Machine the hole for my bodies Can't see where the air filter would go after the Trumpets were fitted ? |
|
Posted 27th Oct 2015 at 16:54
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #22
on the end of it, the maxi air filter is made by Green iirc and is a few hundred quid...________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 27th Oct 2015 at 17:04
|
|
|
cj-gti6
Senior User Location: Barnsley Registered: 09 May 2011 Posts: 799 Status: Offline |
Post #23
Day666 wrote: Just been sent this pic by Will who I met today . He's saying this is the GRP air intake box ? I've asked him to double check as it looks the nuts & Jenvey said they would Machine the hole for my bodies How much is he asking for this airbox Damo?? Looks like he's buying them from MC racing in France and selling them on;  Just go to them direct - I did that's where I got my maxi wing mirrors from!! ________________________________________ 99/S Carbon Gti-5 |
|
Posted 27th Oct 2015 at 17:13
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #24
Looks like a nice cheap ST220 filter or similar would fit mind....________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 27th Oct 2015 at 17:13
|
|
|
cj-gti6
Senior User Location: Barnsley Registered: 09 May 2011 Posts: 799 Status: Offline |
Post #25
cj-gti6 wrote: Aesthetically my roof is bloody marvellous - bare carbon on the underside is the absolute dogs!!! No major weight loss and 100% useless for motorsport, but I've no plans to do rallying/hill climbs etc so I'm happy as Larry!! Can actually do hill climbs, sprints and time attack stuff with a carbon roof so might have a look into it!! ________________________________________ 99/S Carbon Gti-5 |
|
Posted 28th Oct 2015 at 11:02
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.
