|
displaying posts 1 to 8 of 8
| Author | Subject: Front bumper removal |
 Chr1sch
Seasoned Pro  Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #1
Hi folksIm desperately trying to get my front bumper off, ive taken the arch liners out, is it held on by the 2 nuts either side right up at the top? Most of the bottom ones appear to be broken or missing but the main ones seem to be a nightmare?! On the drivers side arent they behind the washer bottle? (im also struggling with how tight they are, even on passenger side they're behind plastic trunking making it impossible to get a ratchet on it? Hellllp Cheers C |
 Posted 11th Sep 2014 at 14:39
|
|
|
braymond
Seasoned Pro  Location: Brighton Registered: 20 Aug 2008 Posts: 1,163 Status: Offline |
|
|
Posted 11th Sep 2014 at 14:48
|
|
|
Chr1sch
Seasoned Pro Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #3
Great thanks I couldn't find that thanks!! |
|
Posted 11th Sep 2014 at 15:04
|
|
|
calibra306
Seasoned Pro  Location: Gravesend, Kent Registered: 06 Nov 2011 Posts: 1,315 Status: Offline |
Post #4
There the 10mm nuts not the 13mm as.there for cross member. I use several long extension bars with a flexi head on aswell.________________________________________ V6 Power!Faster I can go the better! Its not what you drive, its how you drive that wins the race! |
|
Posted 13th Sep 2014 at 20:49
|
|
|
bigbadbowen
Seasoned Pro  Location: Winchester Registered: 21 Nov 2003 Posts: 13,752 Status: Offline |
Post #5
Always undo the 4 13s and take whole front end off - much easier |
|
Posted 13th Sep 2014 at 22:00
|
|
|
Chr1sch
Seasoned Pro Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #6
Bloody hell thanks gents, I was indeed fighting with the 13mm lol10mm came off easily and all done, now trying to change the one buggered fan motor... |
|
Posted 14th Sep 2014 at 09:50
|
|
|
Cjwatson27
Seasoned Pro  Location: Oxford Registered: 17 Sep 2013 Posts: 1,968 Status: Offline |
Post #7
Where are the other 2 13 mm to take the front end off . I know the 2 at the top but couldn't find any more ?________________________________________ Old pugs don't die they just get faster |
|
Posted 14th Sep 2014 at 09:59
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #8
There's the two at the top by the wings which you see when looking from above, and the other 2 are accessed from in the wheel arch behind the liners. You'll see one each side near the 10mm's.________________________________________  |
|
Posted 14th Sep 2014 at 10:40
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.