|
displaying posts 1 to 6 of 6
| Author | Subject: Whose making rear beam mounts |
 jamiek_uk2000
Seasoned Pro  Location: Llanelli Registered: 18 Apr 2009 Posts: 1,925 Status: Offline |
Post #1
Who is making solid rear beam mounts at the moment, I know Daveyboy used to do them but the last post on his page about the beams said that he was having some personal issues and wasn't doing any forum based work. Otherwise I might have to be tempted into buying some lovely Baker ones  ________________________________________ 205 GTi Red - G939 RTU - Died!306 GTi 6 Diablo - Being resurrected! Project Thread Looking for: VTS P1 Rack PR1.2 16" |
 Posted 15th Jan 2013 at 23:13
|
|
|
eliotrw
Seasoned Pro  Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #2
I thought he was making them again now?Birk has been known to do them too Or you can by baker bbm ones which are ally at the rear and the front ones are steel edit:skimmed your post at the end as you can tell  ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 15th Jan 2013 at 23:19
|
|
|
jamiek_uk2000
Seasoned Pro Location: Llanelli Registered: 18 Apr 2009 Posts: 1,925 Status: Offline |
Post #3
I had Bakers on my 205, they looked so nice I didn't want to bolt them to the underside of my car! The only thing is that they come in just shy of £200 for the 6 and I know Davey's were just over £100 on exchange. Shiny things are nice, but coin in the pocket is nicer! (Or spent on more bits for the 6)________________________________________ 205 GTi Red - G939 RTU - Died!306 GTi 6 Diablo - Being resurrected! Project Thread Looking for: VTS P1 Rack PR1.2 16" |
|
Posted 15th Jan 2013 at 23:26
|
|
|
roland rat
Yeeeah Rat fans!  Location: Swansea Registered: 29 Nov 2006 Posts: 22,282 Status: Offline |
Post #4
Birk or daveyboy |
|
Posted 15th Jan 2013 at 23:32
|
|
|
roland rat
Yeeeah Rat fans! Location: Swansea Registered: 29 Nov 2006 Posts: 22,282 Status: Offline |
Post #5
Birk or daveyboy |
|
Posted 15th Jan 2013 at 23:33
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #6
jamiek_uk2000 wrote: I had Bakers on my 205, they looked so nice I didn't want to bolt them to the underside of my car! The only thing is that they come in just shy of £200 for the 6 and I know Davey's were just over £100 on exchange. Shiny things are nice, but coin in the pocket is nicer! (Or spent on more bits for the 6) think mine were 90 un fitted on here ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 15th Jan 2013 at 23:34
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.