Post #1
Done a quick search but found nowt, anyone removed it from theirs ? If so fancy doin a quick FAQ.Cheers, Steve
|
displaying posts 1 to 25 of 37
Pages (2): [1] 2
| Author | Subject: ABS Removal on Track Car |
 shakey
Regular  Location: Buckley Registered: 23 Sep 2008 Posts: 492 Status: Offline |
Cheers, Steve |
 Posted 28th Oct 2009 at 01:30
|
|
|
chris with a pug
Seasoned Pro  Location: Southampton Registered: 16 Feb 2003 Posts: 5,366 Status: Offline |
Post #2
 this is how I did it. Not sure if you want to keep the ABS for road use |
|
Posted 28th Oct 2009 at 01:33
|
|
|
shakey
Regular Location: Buckley Registered: 23 Sep 2008 Posts: 492 Status: Offline |
Post #3
No just track use. Guess it's a bit easier with the engine out the way. |
|
Posted 28th Oct 2009 at 01:36
|
|
|
mr swampy s16
**BAD SELLER**  Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #4
If you intend to mot it and the car was fitted with it you need it working.Or a friendly tester. Would require new lines or at least parts of lines to join up from mc to the rest of system. Could then remove the sensors, abs pump, etc |
|
Posted 28th Oct 2009 at 01:38
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #5
if it is not there it can't be tested, it doesn't need to be there atall for the mot if it was born with it. if you have it, but it's broke, then that is when it's a problem (what i was told by the garage)i routed all new pipes from the MC to the calipers via a bias valve and did away with the valve underneath had the front MC port splitting down to a T piece, going off to both front calipers had the rear MC port going to the inside, to a bias valve, out the back and to another T piece; two lines to each rear caliper. ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 28th Oct 2009 at 01:43
|
|
|
chrisd306
Seasoned Pro  Location: Perth Scotland Registered: 26 Nov 2005 Posts: 10,061 Status: Offline |
Post #6
What rikky said, as weve had this with a few cars at our garage________________________________________ In my garage just now2003 BMW M3 & 2009 L200 Raging Bull & Audi Q5 S Line AX stock rod & Saxo Stock rod Sold the bike an charged rallye an bought a caravan, midlife crisis or what! |
|
Posted 28th Oct 2009 at 02:21
|
|
|
shakey
Regular Location: Buckley Registered: 23 Sep 2008 Posts: 492 Status: Offline |
Post #7
Sh*t, sounds a bit more involved than I thought. Did you do your own Rickky or a local garage ? I live in Wales but work in central Manc. Oh and how much did all that cost ?Cheers Steve |
|
Posted 28th Oct 2009 at 02:37
|
|
|
mr swampy s16
**BAD SELLER** Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #8
Yeah he did it all.I supplied all the lines for him and have done for a couple of others on here and other forums |
|
Posted 28th Oct 2009 at 03:19
|
|
|
pete_rallye
Seasoned Pro  Location: Yorkshire Registered: 12 Dec 2002 Posts: 5,253 Status: Offline |
Post #9
Yeah, do as Rikky says, thats how I did it. I'd keep the brake servo too, I have 2x master cylinders and no servo and the brakes don't feel half as good. Cost wise you should be able to do it for around ________________________________________ Oulton Park in a BTCC 306 vid 1Oulton Park in a BTCC 306 vid 2 Lap of the 'ring |
|
Posted 28th Oct 2009 at 04:41
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #10
I re-plumbed the back half of my ZX (from bottom of bulkhead right back to the calipers) for less than a ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 28th Oct 2009 at 04:48
|
|
|
joevts
Senior User Location: barnsley Registered: 21 May 2008 Posts: 608 Status: Offline |
Post #11
err... just take the fuse out? |
|
Posted 29th Oct 2009 at 00:49
|
|
|
mr swampy s16
**BAD SELLER** Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #12
Doesnt reduce the weight though does it?joevts wrote: err... just take the fuse out? |
|
Posted 29th Oct 2009 at 00:56
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #13
loads of weight to be saved ditching the abs and pipes. you will be suprised. get all the loom and everyhing out from underneath, bloody loads of it________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 01:18
|
|
|
shakey
Regular Location: Buckley Registered: 23 Sep 2008 Posts: 492 Status: Offline |
Post #14
Like I said, anyone fancy doin an FAQ or even better doin the job for me ? |
|
Posted 29th Oct 2009 at 03:00
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #15
It's easy, Remove pump and wiring which runs under the car and remake brake pipes to suit.Can;t really say much more than that ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 29th Oct 2009 at 03:48
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #16
easy to do yes but fiddly routing pipes and whatnot, not hard though by any means. you will get very messy too removing the wiring and old pipework [or i did!]________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 03:58
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #17
rikky wrote: easy to do yes but fiddly routing pipes and whatnot, not hard though by any means. you will get very messy too removing the wiring and old pipework [or i did!] Looking forward to doing mine  ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 29th Oct 2009 at 04:00
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #18
walk in the park for someone of your mechanical calibre  ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 04:15
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #19
rikky wrote: walk in the park for someone of your mechanical calibre Thanks, I think?   ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 29th Oct 2009 at 04:17
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #20
yeah you'll be fine. i know you have hand problems but you'll get there ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 04:20
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #21
What's this ABS malarky then?________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 29th Oct 2009 at 04:21
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #22
it's that metal block that has a load of outlets on it, you use it for propping your block upright when you remove the bottom mount.________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 04:24
|
|
|
bono
Seasoned Pro  Location: Surrey Registered: 16 Mar 2004 Posts: 1,289 Status: Offline |
Post #23
I got rid of my ABS.I thought, why would you want Anti-Braking-System? ________________________________________ ///M5 |
|
Posted 29th Oct 2009 at 04:26
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #24
rikky wrote: yeah you'll be fine. i know you have hand problems but you'll get there Hand problems? Other than chronic wrist cramps (I'm single) I have no idea what you are talking about!  ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 29th Oct 2009 at 04:26
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #25
just fooling you bruvva ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 29th Oct 2009 at 04:27
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.