displaying posts 51 to 75 of 406

Pages (17): first .. 2 [3] 4 .. last

Author Subject: MY 205 GTI-6 Supercharged Track car
toby

Seasoned Pro

Location: Bourne

Registered: 13 Dec 2007

Posts: 1,396

Status: Offline

Post #51
I'm interested in this discussion after first putting an MI16 engine in a 205 back in the early nineties, the car felt like a rocketship back then and with its bilsteins, A.P four pots and the six speed it was a quick car.

I then went down the route of putting a GTI-6 engine in another 205 I had with PAS and aircon but I was struggling with space and the weight of that lot decked the 205. I returned it back to standard and sold the engine on but its interesting to see the GTI-6 engine has become a favourite all these years on. I suppose once all the unnecessary crap is removed from the GTI-6 engine the weight difference wouldn't be much, the difference of the block material only.

Great project you have there Spiky. I was going to do something similar with my old F plate non-sunroof graphite grey one but after Supercharging the 306 didn't really need or have time for any more projects.

________________________________________

Previous Peugeot - 2000(w)GTI-6, Me old China, Supercharged with working aircon!
Posted 6th Jan 2009 at 23:35
captaink

Senior User

Location: Exeter

Registered: 18 Jul 2008

Posts: 579

Status: Offline

Post #52
super josh wrote:
captaink wrote:
How much more heavier is a Gti6 engine than the original 1.9 engine in a 205 GTi?
That is of course with the aircon and power steering systems removed from the GTi6 engine before insertion into the 205 and the "heavy PAS pump bracket" chopped off. I'm thinking there isn't much weight difference then. Smile

25 Kilos I think Kieran. Could always just put the battery in the boot if it's bothering you Smile

I don't drive fast enough for it to bother me at all. LOL

But with the PAS and aircon systems removed and the heavy bracket thing (for the PAS pump?) removed then I'm guessing that weight gap isn't that big. Either way, I'm much more happier with the GTi6 engine in there. So much quicker ! Big grin

________________________________________

When I got home last night, my G/F demanded that I take her somewhere expensive - so, I took her to a petrol station.

1993 L reg 205 with GTi6 engine and GTi6 brakes
1995 M reg FTO GPX manual
Posted 9th Jan 2009 at 20:03
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #53
i bought a swagger from colin satchel recently and gave a wizz before oulton park.

cant wait to go to town on the car with it...lol

here is some i did, you can see the hole i drilled first then what the swagger does Big grin



________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 20th Jan 2009 at 02:44
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Posted 20th Jan 2009 at 03:12
monty-69

Senior User

Location: Colne

Registered: 02 Jul 2006

Posts: 785

Status: Offline

Post #55
rallyeash wrote:
wouldnt of put a s16 in a 205 anyway....

The xu10j4rs isnt so impressive when you consider its got another 100cc over the mi16 but only another 7hp(on paper) from fancy manifold, higher compression and lighter components...several years later
Posted 20th Jan 2009 at 03:54
mangledmetal

Seasoned Pro

Location: MOB: 07968307843

Registered: 30 Aug 2003

Posts: 4,406

Status: Offline

Post #56
dotn spose you happen to know where there's any spare shells floating around do ya>?

________________________________________

Going through the gates of Hell Backwards, in a ball of flames!

I'll, save you a place!!
Posted 20th Jan 2009 at 03:54
nick!

Seasoned Pro

Location: Essex

Registered: 20 Nov 2007

Posts: 1,191

Status: Offline

Post #57
Looks and sounds awesome mate! Nice pics and vids.

________________________________________

Cherry Red Rallye - 179.1bhp@fly, 148.4bhp@wheels
Posted 20th Jan 2009 at 18:18
crossie

Regular

Location: YORK/DURHAM NOW!

Registered: 30 Aug 2005

Posts: 216

Status: Offline

Post #58
spiky wrote:
i bought a swagger from colin satchel recently and gave a wizz before oulton park.

cant wait to go to town on the car with it...lol

here is some i did, you can see the hole i drilled first then what the swagger does Big grin






how much was the swagger from colin satchel??

Looks like it does a nice job.

________________________________________

106 S1 red rallye now getting some track toys!


"Pug engineers probably had a large budget to sort sqeaks and rattles out. They went down the pub and got p*ssed and gave it all to the chassis boys.":petegti6, 31/07/07 - LMAO
Posted 20th Jan 2009 at 18:24
smegal

Seasoned Pro

Location: Leeds

Registered: 26 Dec 2005

Posts: 5,940

Status: Offline

Post #59
Is this like the swaging tool you used?

tools

________________________________________

Ex SC-6

Now in a Megane R26
Posted 20th Jan 2009 at 21:07
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #60
had the 205 weighed today

weight in at 860kg

was hoping for less, but ok with it for now Big grin

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 21st Jan 2009 at 01:02
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #61
sorry guys, didnt know i had replies

SWAGGER


the swagger was

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 21st Jan 2009 at 01:11
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #62
here is the whole punch

Hole punch

i not used the hole punch so dont know if it is any good

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 21st Jan 2009 at 01:26
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #63
had it weighed again today, after i found out (from taking the baby for a walk) that there are TWO weighbridges, about 200yrds from my house... DOH

it was again 860KG, so it's diet time, and over the next few days i shall be loosing some weight Wink


been having a little play with my new metal punch and swagger Smile





________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 27th Jan 2009 at 02:50
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #64
Well more progress tonight Smile

i have cut out the harness bar and the plates holding it in place, then weighed it

4.5kgs ...OUCH

and as you can see from the pics i will be clipping the harness to the rear floor seat belt locations

then i set about cutting more holes out Smile






________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 29th Jan 2009 at 00:09
rikky

Forum Pikey

Location: cheshire

Registered: 28 Feb 2004

Posts: 26,756

Status: Offline

Post #65
good work

i saw them hole swaging tools somewhere else, i have them watched on ebay to remind me to buy one. i think they are made by colin satchell

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
306 red '6' 3d-printed badges (old part no 866503) | gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]
Posted 29th Jan 2009 at 00:28
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #66
if you read up i provided the link and said where i got mine Wink LOL:

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 29th Jan 2009 at 01:11
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #67
how do you like the possilbe new colour?

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 29th Jan 2009 at 21:29
gti6girl

Seasoned Pro

Location: Dartford

Registered: 19 Feb 2007

Posts: 2,692

Status: Offline

Post #68
Uber cool
Posted 29th Jan 2009 at 22:29
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #69
done a little more tonight, not much but cant spend all my life out there...lol


________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 30th Jan 2009 at 00:20
monty-69

Senior User

Location: Colne

Registered: 02 Jul 2006

Posts: 785

Status: Offline

Post #70
Crikey, i wouldnt dare fart incase the back end folds in! Suerly its worth the extra safety for the sake of 4.5kgs? Just my opinion, good luck on track Thumbs up
Posted 31st Jan 2009 at 21:54
jonnie205

Seasoned Pro

Location: Bicester

Registered: 10 Apr 2005

Posts: 4,146

Status: Offline

Post #71
have you debracketed the shell underneath?
Posted 1st Feb 2009 at 02:32
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #72
what ones you have in mind?

brake lines and stuff?

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 1st Feb 2009 at 02:34
Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #73
Surely all them holes weakens the shell a lot!?

The 205 is not strong as it is so all them will make it as weak as p!ss?!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk
Posted 1st Feb 2009 at 14:10
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #74
it will be fine Smile

wont weaken it much. as not really structual Big grin

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 1st Feb 2009 at 15:26
spiky

Seasoned Pro

Location: Cardiff

Registered: 13 Oct 2006

Posts: 2,310

Status: Offline

Post #75
here is my latest purchase Big grin



________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP Smile

268+BHP and 860kg = FUN
Posted 12th Feb 2009 at 21:26

Pages (17): first .. 2 [3] 4 .. last

Adrian Flux
All times are GMT. The time is now 05:13

The Peugeot GTi-6 & Rallye Owners Club Ltd - Registered in England & Wales - Reg No: 07410694 - ©2020 all rights reserved.

Please Note : The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club Ltd or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy and legal information