£4,500

1996 Peugeot 306 Gti phase 1

  • 2000cc
  • Grey
  • 140 miles

Location: Bridgend

  • No tax
  • No MOT
  • Service history unknown
  • Cambelt changed: Unknown

Modifications: Throttle bodies Omex LSD 5.2 CWP

Contact: Pm for number

displaying posts 1 to 1 of 1

Author Subject: 1996 Peugeot 306 Gti phase 1
dcc

Regular

Location: Wales

Registered: 24 Feb 2009

Posts: 496

Status: Offline

Post #1
Grey 306 gti phase 1 with phase 3 front end

S16 engine
Fast road cams
Omex 600
Jenvey 45mm throttle bodies
satchel inlet manifold
4-2-1 Torque Tech exhaust manifold
6 speed close ratio gearbox with 5.2 Oreca straight cut final drive
3J plate diff
Safety devices bolt in 6 point cage, 4mm feet plates
Ds3000 pads
Oil catch can
Bilstein b8 dampers
Eibach springs
Roller bearing wishbones
Xsara VTS Quick rack
Xsara VTS torsion bars
30mm ARB
Good rear axle
New roof scoop and sunroof blank
New plugs & leads
New coil pack
All new fluids including gearbox
New Halfords battery
Remapped by Ian James, 199.2 bhp
2 new rear wheel bearings
Stud and nut kit all round

The body work is a tatty but it's good enough from far enough away
it's got a phase 3 front end as a previous owner ran out of talent when it was phase 1😂

________________________________________

205 GTI
Xsara HDI
Posted 19th Jun 2022 at 20:37

Adrian Flux
All times are GMT. The time is now 15:05

The Peugeot GTi-6 & Rallye Owners Club Ltd - Registered in England & Wales - Reg No: 07410694 - ©2022 all rights reserved.

Please Note : The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club Ltd or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy and legal information