|
displaying posts 1 to 25 of 25
| Author | Subject: Window/Mirror Controller 6552wn (11529) |
 PugAndPlay
Newbie  Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #1
Hi,Does anybody have a electric window/mirror controller lying around that I could buy? Codes: - 6552WN - 11529 Many thanks, Nick. ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
 Posted 17th Jan 2020 at 15:30
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #2
I have ones off a ph3 HDI that I believe should work but I'll cross refeance the part number on service boxDriver side I presume? ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 17th Jan 2020 at 19:15
|
|
|
alcon
Senior User  Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #3
According to Service box it's still available.......for 154.78!I think I might have one as well if gnrlee doesn't have one. ________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 17th Jan 2020 at 20:29
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #4
Thanks gnrlee & alcon! Details:Mini pins = 17 Fat/flat pins = 4 (many have 7 which apparently don't work if put into a car which only needs 4... bit of a pain that!) Fingers crossed one or both of you have a match :-) Here are the pics I found showing what I currently have. According ot other people who've tried, it needs to be the same pin layout to work:    ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 18th Jan 2020 at 20:16
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #5
gnrlee wrote: I have ones off a ph3 HDI that I believe should work but I'll cross refeance the part number on service box Driver side I presume? Thanks! Yes driver's side ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 18th Jan 2020 at 20:21
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #6
alcon wrote: According to Service box it's still available.......for 154.78! I think I might have one as well if gnrlee doesn't have one. Horrendous price that! :-) Thanks for the heads up ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 18th Jan 2020 at 20:13
|
|
|
alcon
Senior User Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #7
Just checked the spare one I have but it's got 6 large pins and 17 small ones. No good then?________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 18th Jan 2020 at 21:03
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #8
alcon wrote: Just checked the spare one I have but it's got 6 large pins and 17 small ones. No good then? From reading around, it seems later ones (mine is early ph2 '97) had more than 4 fatter pins adn people on forums like this have tried and failed... I could be wrong (I hope I am) Is there a number on yours? ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 18th Jan 2020 at 21:40
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #9
I tried to cross reference mine with servis box but couldn't find itI'll have a look to see if it's the 4 pin version but if memory serves this is on earlier models as said ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 19th Jan 2020 at 08:28
|
|
|
alcon
Senior User Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #10
PugAndPlay wrote: alcon wrote: Just checked the spare one I have but it's got 6 large pins and 17 small ones. No good then? From reading around, it seems later ones (mine is early ph2 '97) had more than 4 fatter pins adn people on forums like this have tried and failed... I could be wrong (I hope I am) Is there a number on yours? The number on mine is 11529. I bought it off a forum member years ago as a replacement for my Ph3 (1999) one but never needed it in the end. Therefore I don't know what phase of age of car it came from originally. ________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 19th Jan 2020 at 20:05
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #11
Hi alcon, it really doesn't help that my controller doesn't have a part number on it! I'd "researched it" to be 6552wn/11529, but I'm now confused if yours is a bona fide 11529 but has 6 flat pins...  My concern about just trying out parts to see if they work is due to forum threads like this: https://www.306oc.co.uk/forum/archive/index.php?thread-21213.html ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 19th Jan 2020 at 21:57
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #12
gnrlee wrote: I tried to cross reference mine with servis box but couldn't find it I'll have a look to see if it's the 4 pin version but if memory serves this is on earlier models as said It may be that checking teh flat pins is the way forward, as alcon's reply about his 11529 controller having '6' flat pins has thrown me... there's very little for me to work with, so if one of yours happens to have 4 flat pins adn teh switch controls look like mine, then perhaps we'll try that first up? Fingers crossed! ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 19th Jan 2020 at 22:00
|
|
|
alcon
Senior User Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #13
your 4 flat pins go (according your your photo)| | | | Mine are like this 0 | | | | | | if that makes sense! 0 = hole where there could be a pin ________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 20th Jan 2020 at 14:24
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #14
Hi alcon, I suspect that's not going to be a goer (and that mine isn't a "11529"...)Darn! I appreciate you checking for me :-) Above and beyond! Many thanks (if you had any other thoughts about how I may track one down, I'd be grateful, but no worries if not) ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 20th Jan 2020 at 21:01
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #15
Mines the six pin version too :/________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 20th Jan 2020 at 22:06
|
|
|
alcon
Senior User Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #16
there is/was one on ebay yesterday but you'd need to check with seller about the pins as there was no mention.________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 21st Jan 2020 at 08:07
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #17
Do either of you know the difference between the flat pins anyway...? I'm wondering if I can cannibalise a cheap one for parts... it's only the twiddley knob that I need to replace ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 21st Jan 2020 at 18:26
|
|
|
alcon
Senior User Location: Glasgow Registered: 19 Jan 2005 Posts: 931 Status: Offline |
Post #18
The Autodata wiring diagrams used to be on here which would have explained the pins however the photobucket hosting has blurred them out:http://www.306gti6.com/forum/showthread.php?id=134863&page=last ________________________________________ 1999 GTi-6 (china blue)1999 Rallye (black) |
|
Posted 21st Jan 2020 at 19:58
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #19
I've butchered one before now for a window button that snappedFrom memory I think you can swap that wingmirror button but not sure if it's interchangeable between phases I'd have thought so? ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 22nd Jan 2020 at 09:50
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #20
Thanks guys.I think I'll have to take the plunge! I seem to have the only controller ever made with 4 flat pins :-) ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 23rd Jan 2020 at 09:50
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #21
 goodluck,..I have one one my R plate Gti6 but I still need it 😂 ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 23rd Jan 2020 at 23:43
|
|
|
PugAndPlay
Newbie Location: READING Registered: 30 Oct 2018 Posts: 11 Status: Offline |
Post #22
gnrlee wrote: goodluck,..I have one one my R plate Gti6 but I still need it 😂 Actually... if that's teh case, would yoube able to see if there's a number stamped on your one? That might at least give me a ray of hope to see if I can find a whole one before I start going all Dr Frankenstein on mine... my car is also an R plated GTI-6 :-) (diablo red) ________________________________________ 306 GTi-6 (Diablo Red) Late 1997 P306 D-Turbo (Black) Early 1997 P 205 GTi 1.9 (Gunmetal Grey) 1987 E |
|
Posted 24th Jan 2020 at 09:44
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #23
One here,...ebay Clicky ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 29th Jan 2020 at 08:42
|
|
|
rudolf
Seasoned Pro  Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #24
The auto switch is on the wrong side ________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 29th Jan 2020 at 23:31
|
|
|
eiei0
Regular Location: Kildare Registered: 08 May 2020 Posts: 192 Status: Offline |
Post #25
Anyone have a spare 6 pin one available please |
|
Posted 28th Mar 2021 at 19:46
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.