Ben_W
Post #1
Parts are from the beam that was on my Rallye. No camber or issues, I'm putting a Xsara VTS beam back on it.Tube is already sold but I've got:
Photos and prices for beam bits:
Torsion bars - two sets. One is the set from this beam. One is a set from another beam that I blasted and painted. Couple of chips and marks to the paint from storage but still very good. I marked the ends so I knew which bar was which in terms of the one or two stripes of paint. Non painted ones £25, painted £50.
Arb plus end plates - is what it is, not much more to say! One end plate removed (the one you can, not the other end) and cleaned up. £50
Rear arms and shafts - check.the pictures for shaft condition. The look ok to me but I'm no expert. As said, beam had no camber or any issues. £25 per side
Open to sensible offers and can post at buyer cost if needed, although tid prefer collection on the rear arms.
________________________________________
Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy
Black 208 GTi .... Wife's car now
Silver BMW 550i.... The executive missile
Posted 1st Dec 2019 at 10:41
