|
displaying posts 1 to 3 of 3
| Author | Subject: Fuel hose sizes |
 pugfrank
Junior User  Location: Hassocks Registered: 05 Jul 2019 Posts: 77 Status: Offline |
Post #1
I want to make sure I have all the correct bits before I attempt replacement at the weekend, I'm trying to be prepared as possible, I hate running around last minute .com at 4oclock on a Sunday!! From my reading of previous posts just want to make sure I understand the sizing of the fuel pipes. Is it as below? Both pipes are 8mm ID but the one using the white blocks turns into 10mm ID just before it attaches to fuel rail?  |
 Posted 6th Aug 2019 at 13:27
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #2
Yes, 8mm hoses can be run from where the solid lines enter the engine bay right up to the rail.As you point out, the fuel inlet to the rail is 10mm. I got some 10mm hose and bought a reducer joiner from 10mm to 8mm and did it that way. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 7th Aug 2019 at 20:31
|
|
|
pugfrank
Junior User Location: Hassocks Registered: 05 Jul 2019 Posts: 77 Status: Offline |
Post #3
Thankyou stan_306gti6, fuel line, clips and reducer all on order. |
|
Posted 8th Aug 2019 at 15:41
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.