|
displaying posts 1 to 13 of 13
| Author | Subject: Where to strip a car? |
 rudolf
Seasoned Pro  Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #1
I've got the chance to get a '6' to strip keeping some parts and selling others.Anyone know somewhere in the North West where I could put it for a week or two to strip? ________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
 Posted 30th Jun 2019 at 20:56
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
a week?! should have it done in a day or two at the most, no mates?? ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 1st Jul 2019 at 11:07
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #3
No mates where I can put it off road to strip.________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 1st Jul 2019 at 18:19
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #4
all you need is a driveway, hell I've worked on plenty of cars on the side of the road  :________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 1st Jul 2019 at 21:52
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #5
Would someone like to share the parts?________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 5th Jul 2019 at 19:50
|
|
|
pug_306
Seasoned Pro  Location: Great Hockham Registered: 28 May 2013 Posts: 1,593 Status: Offline |
Post #6
If you have a driveway you could strip one fully in 4-6 hours and get it removed the same day if you have a place to store the parts. ________________________________________ 1998 Supercharged White Rallye1992 205 GTi6 205 Turbo 340bhp |
|
Posted 5th Jul 2019 at 20:04
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #7
Might go down to sellers and try to strip in one day then bring back all parts in a LWB Sprinter van.Whats the eadiest and fastest way to cut off a rear quarter panel? ________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 6th Jul 2019 at 21:14
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #8
what are you aiming to do - save important bits to make a quick £ or..?if you're after fast money then i'd go down in a van with an engine crane and tool kit, and: - keep seats, engine/box/loom complete, rear beam, exhaust, wheels, any interior bits you can quickly scavenge, then have shell scrapped some of the smaller stuff will sell but takes a while and you have to tolerate bellends showing up at 11.45pm for a door which they haven't got room to fit in their boot i've stripped my full running gti6 in the morning early and kept the above bits plus every small bit i could inside and threw them in my loft for random ebay and forum people. by 12pm the car was collected as a shell by crane. the car netted me £1400-1500 profit and i kept the engine for my 205. i've done it a few times, it's only easy when everything comes off quick and you have storage space. ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 6th Jul 2019 at 23:41
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #9
It's not a complete car so has the engine, seats, and rear beam removed already.I'm after the rear bumper, tailgate, doors, bonnet, front wings, and anything else I can remove and bring back in a van. What's the fastest and easiest way to cut off a quarter panel on site? ________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 6th Jul 2019 at 23:50
|
|
|
thugpuggin
Seasoned Pro  Location: Bristol Registered: 10 Apr 2004 Posts: 26,784 Status: Offline |
Post #10
Angle grinder with lots of s**t cut off around it then sort it out at a later date neater to suit what you need.________________________________________ Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.Joint Kent Leader |
|
Posted 7th Jul 2019 at 00:36
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #11
Is that the best way to get the windscreen off fast?________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 7th Jul 2019 at 00:52
|
|
|
Joep
Regular Location: Urmond (The Netherlands) Registered: 19 Sep 2013 Posts: 463 Status: Offline |
Post #12
There is an easy way to get it out fast... or do you need it in one piece?________________________________________ My car park:'96 Sigma Blue XSi6 '98 Diablo Red GTi6 '99 Onyx Black S16 All RFS powered! Plus various other Peugeots |
|
Posted 7th Jul 2019 at 08:47
|
|
|
rudolf
Seasoned Pro Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #13
I want to use it if not too badly scratvhed.________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 7th Jul 2019 at 09:15
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.