displaying posts 1 to 10 of 10

Author Subject: Gti6 Alloy Wheel Nut
stontamar

Newbie

Location: Dunfermline

Registered: 19 May 2016

Posts: 20

Status: Offline

Post #1
Trying to find a replacement wheel nut for the one that was stolen off my car. Can anyone please help with an original nut or advise if there are suitable alternatives to fit the Alloys fitted to the Phase 3 Gti6's.

Cheers
stontamar

________________________________________

Dave Mallinson
Posted 11th Mar 2019 at 10:39
rudolf

Seasoned Pro

Location: Skelmersdale

Registered: 07 Apr 2004

Posts: 2,769

Status: Offline

Post #2
They're wheel bolts lol

Phase 2 and 3 have different Cyclone alloys, tapered or flat.

There's plenty on ebay

________________________________________

S Reg Diablo standardsSpec SORNED
R Reg Nile standard spec written off then repaired
X Reg Astor in need of TLC
R Reg Nile to restore
Set of Lions to fit.
Posted 11th Mar 2019 at 14:47
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #3
If it's a flat seat bolt, I've a load that are coming off this Citroen I'm breaking. Cover the post and I'll send you one.

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 11th Mar 2019 at 19:10
stontamar

Newbie

Location: Dunfermline

Registered: 19 May 2016

Posts: 20

Status: Offline

Post #4
Cheers very kind thank you. From previous reply not sure if its the flat type fitted to a Phase 3 Gti6. My e-mail address is stontamar@sky.com

Regards
stontamar

________________________________________

Dave Mallinson
Posted 11th Mar 2019 at 19:30
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #5
Dave, can you remove one of the others and have a look at it. It will be very obvious if it's a flat seat or tapered seat bolt.

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 11th Mar 2019 at 21:13
stontamar

Newbie

Location: Dunfermline

Registered: 19 May 2016

Posts: 20

Status: Offline

Post #6
Cheers will do car away today but will check it as soon as possible.

________________________________________

Dave Mallinson
Posted 12th Mar 2019 at 09:27
Rich E Forum Admin

Location: Hertfordshire

Registered: 27 Apr 2005

Posts: 7,757

Status: Offline

Post #7
Changeover was May 2000 so roughly halfway through phase 3 production.

Early cyclones will only take the early bolt. Later cyclones will take both types of bolt.

The early bolt is chrome plated with no cap whereas the later bolt is not and has (or at least should have) a trim cap over the top.

Of course at this age it's pot luck as to whether or not the car is still on its original wheels.

________________________________________

Rich
Posted 12th Mar 2019 at 13:23
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline

Post #8
quote:
[quote="Rich E"]Changeover was May 2000 so roughly halfway through phase 3 production.

Early cyclones will only take the early bolt. Later cyclones will take both types of bolt.

The early bolt is chrome plated with no cap whereas the later bolt is not and has (or at least should have) a trim cap over the top.

Of course at this age it's pot luck as to whether or not the car is still on its original wheels.


I never knew the design of the cyclones changed during production...every day's a school day. Cool

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 13th Mar 2019 at 20:32
stontamar

Newbie

Location: Dunfermline

Registered: 19 May 2016

Posts: 20

Status: Offline

Post #9
Thanks to all who have replied to this thread. Will have a chance at the weekend to inspect and get a photo of the type of bokts fitted to my Gti6.

________________________________________

Dave Mallinson
Posted 14th Mar 2019 at 08:16
stontamar

Newbie

Location: Dunfermline

Registered: 19 May 2016

Posts: 20

Status: Offline

Post #10
Have extract one wheel bolt and its the flat type. So not sure its the alloy is the earlier or later type but will fit with the same type. Ben W if you still have a spare would be grateful to purchase one from you. My e-mail address is stontamar@sky.com

Once again thanks for all the replies.

Regards

Dave

________________________________________

Dave Mallinson
Posted 16th Mar 2019 at 12:02

All times are GMT. The time is now 05:49

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.