displaying posts 1 to 10 of 10

Author Subject: smashed tailgate glass
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #1
i have a phase 3 tailgate (and a phase 3 spoiler to match)

Generic image:-


say i wanted to smash the glass to repsray the tailgate properly

do i need some sort of seal from Peugeot?

i have checked my VIN in the service box but i think my car originally had a phase 2 tailgate with the bigger rubber bit that shows (and takes a phase 2 spoiler)
and the black strip down the bottom of the tailgate Thumbs down

generic phase 1/2 tailgate picture

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 14th Sep 2016 at 14:44
mocinim

Seasoned Pro

Location: The Darkside of bedford :)

Registered: 09 Jan 2015

Posts: 2,307

Status: Offline

Post #2
There are different seals for both i believe ph2 the thick black rubber and ph3 a hidden thin rubber thats sits under the glass
You can cut your tail gate glass out with a glass remover wire much like a cheese wire do this carefully and you can save the glass and the heat element
Finding a replacement glass could be hard doing

________________________________________

BLACK RALLYE - phoenix
WHITE RALLYE - valliant

http://public.servicebox.peugeot.com/

https://www.gov.uk/check-mot-history
Posted 14th Sep 2016 at 15:54
pug_306

Seasoned Pro

Location: Great Hockham

Registered: 28 May 2013

Posts: 1,593

Status: Offline

Post #3
I think day666 can supply the glass if needed.

________________________________________

1998 Supercharged White Rallye
1992 205 GTi6
205 Turbo 340bhp
Posted 14th Sep 2016 at 17:15
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #4
cant get new tailgate glass from Autoglass etc?

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 15th Sep 2016 at 21:54
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline

Post #5
I've just been dealing with this issue as I want to get my tailgate sorted. Some recent info on this here (including source for new non-OE rear window glass):

http://www.306gti6.com/forum/showthread.php?id=162940&page=2#28

The OEM glass is NFP but I got one from Belgium. I know of another one that was offered to me after I'd ordered mine and I can pass you the details of the dealer in Belgium who has it.

As far as the 'seal' goes for a P3 tailgate, a 'tailgate glass moulding' part no 8745 48 is shown on servicebox as needed for my VIN (which has always had a P3 tailgate). The part quoted for my P3 tailgate was about £100 from the dealer. I didn't order it in the end as the parts guy said the glass installer should have the kit to install a rear window correctly. I change my mind every time I think about it and may end up ordering it anyway.

I've got a new rear window and am picking up a second hand tailgate next week which I will get painted up nicely and the new glass installed. I'll talk to the glass installer before I do anything. I did want to remove my glass and reinstall it on the new tailgate but, while that is possible, the last glass guy I spoke to said the tabs for the rear window element wiring nearly always break off when removing it, so better to have a new piece of glass to hand.

Autoglass might still have some kicking around, best to give them a call.

________________________________________

Cherry Rallye SOLD

Posted 16th Sep 2016 at 09:29
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #6
glad to hear im not the only one having this problem

might need that contact then
only problem is the cost of getting it up to Inverness area? Hard enough getting stuff up from england LOL
i could easy find a window guy to fit it

that code does come up on my VIN on the pug service box

was worrying that when Autoglass/etc turn up they will have a phase 2 glass and seal?
then my phase 3 spoiler wouldnt fit?

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 16th Sep 2016 at 13:16
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #7
christ its £97 for some s**te wee seal that looks like it would cost a fiver
surely thats the big seal thats on phase 2 tailgates?

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 16th Sep 2016 at 13:27
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline

Post #8
That's why I didn't initially buy it, I was thinking it might end up being something I didn't need. But on the other hand...

Ref getting it to Inverness, I paid for the glass, but the Belgians wouldn't send it and told me to organise my own courier. I did so (the company was a recommendation on here) and they were great. Don't see why they wouldn't deliver up there? Another thing is the Belgians don't do credit cards so I had to do a bank payment. It all worked out fine though. Sing out if you want the details for the dealer with the screen.

I agree Autoglass might or might not produce exactly the same item(s), that was part of the reason I went OEM

________________________________________

Cherry Rallye SOLD

Posted 16th Sep 2016 at 18:14
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline

Post #9
I used http://www.interparcel.com/ to get the glass over here from Belgium after finding a recommendation on here for them from Welshpug and they were excellent and the price was quite reasonable.

________________________________________

Cherry Rallye SOLD

Posted 17th Sep 2016 at 17:01
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #10
thanks for the info, will wait till nearer the time when i need the window back in

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 19th Sep 2016 at 16:09

All times are GMT. The time is now 04:32

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.