displaying posts 1 to 25 of 82

Pages (4): [1] 2 3 .. last

Author Subject: ** Updated**Breaking hbsc 6
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #1
Interior
Corbeau 3dr sliding bucket seat subframes. Comes with pretensioners. Straight fit £80
Ph3 speedo unit showing 65k ish and silver/grey fronted binnacle £10
Leather steering wheel and airbag ok condition £5 Prov sold
Black A/B/C pillar trims with all necessary screws and clips £15
Ph3 door cards with speaker grills £20
Both electric window switches £10
Indicator and wiper stalks £5 each
Rear leather and alcantara seats with headrests £10
Revotec white supercharger boost gauge £30

Exterior
Black TRS tow strap £5
Silver ph3 spoiler which has some reaction lines but its never got worse in 5 years. Couple of very small rust bubbles by the spoiler which again have not got any worse in 5 £10
Fiberglass smooth grill which looks like its been aerosol painted in diablo £30
Smooth ph3 bonnet in silver. Few stone chips and there is a crack where its been welded/smoothed but never got any worse in 5 years of ownership., hardly noticeable £20
Black mask headlights. N/S has some corrosion by the bulb but has passed the MOT every year. Bottom clips missing £20 Prov sold
Rear lights £5

Engine and transmission
Alloy bottom pulley £50

Mocal 16 row oil cooler with thermostatic sandwich plate with black lines approx 1 meter. Only covered 400 miles £90 Prov sold

8 coilpacks all in good condition £5 each

Nissens ally rad. Not very old and will come with a bottom hose bought new from peugeot 5-6k ago. rad has a couple of holes through it as it had slimline fans on it but no leaks £60

Rad top hose £10

[s]16" OZ Ultralaggera's in anthracite grey. Think the offset is 15-18 so no probs fitting and come with alloy spiggot rings. Genuine OZ carbon fibre center caps.
Will also chuck in the correct wheel bolts and Mc guard locking nuts.
Uniroyal rs2 195/45/16 tyres 2x 4.5mm and 2x 6mm.
The wheels have no curb marks what so ever but have suffered from some lacquer/top coat scratches after i got the local hand car wash to clean the car. Once clean its hardly noticeable. £300[/s] Prov sold

Powerflex yellow bottom mount £5
Helix 4 paddle friction plate again covered 5-6k £130

The exhaust, brakes, seats, highboost injectors, ecu, bilsteins, supercharger and fitting kit are sold.

All prices are collected from benfleet essex. If you want a few bits i could meet people around the m25 when possible.

Oh and the car is in this months performance french car if you want to see what your looking at. Or just go to my project thread.

**edit** just remembered that i have a a red omp upper and lower strut brace. Both have common paint flake but £50 for the pair.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 12th Sep 2016 at 13:32
lj_6

Regular

Location: Bristol

Registered: 19 Jan 2010

Posts: 246

Status: Offline

Post #2
I'll take the fuel pump setup if your willing to possibly courier buddy?

________________________________________

Astra burg #365 Garrett Power
'99 bodied 6 track project
Posted 9th Aug 2016 at 20:04
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #3
lj_6 wrote:
I'll take the fuel pump setup if your willing to possibly courier buddy?


You have a pm lj_6

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 20:13
barrym

Senior User

Location: Westcliff-on-sea

Registered: 26 Jun 2014

Posts: 502

Status: Offline

Post #4
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?

________________________________________

China D Turbo HDi daily charger
Black Rallye occassional toy
Posted 9th Aug 2016 at 20:20
mocinim

Seasoned Pro

Location: The Darkside of bedford :)

Registered: 09 Jan 2015

Posts: 2,307

Status: Offline

Post #5
Leather gear knob in i would say good condition with silver top £20
Black mats Only covered 300 miles and still look brand new £10
Ph3 parcel shelf ( standard stealth type) with speakers but no speaker loom
Rallye blaanks
Silver ph3 side strip set. Few clips have broken off but very use able

Door locks with glovebox lock and ign barrel with 2 key blades £20
No boot lock as ph3's didnt have them. Two or three connection electrical on the barrel ??


Seat leon cupra R splitter cut to fit a gti 6 £20

12 coilpacks all in good condition £5 each 4x please
P.T.F.E inlet manifold gasket £10
Cam covers painted in peugeot steel grey. Seals are ok but i used rtv sealant to £10
Battery box with lid and ecu lid £20
Spare battery box lid £6
Starter New last year £10
Alternator thats been on the car since i've had it £5
Old Standard block with pistons, sump etc complete, Ideal for a rebuild as i think the rings had gone £20
x2 pairs of tatty looking cam covers £5 a pair
Standard crank pulley fairly new and not slipped

Engine crane Smile also


These if available please chap

________________________________________

BLACK RALLYE - phoenix
WHITE RALLYE - valliant

http://public.servicebox.peugeot.com/

https://www.gov.uk/check-mot-history
Posted 9th Aug 2016 at 20:45
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #6
barrym wrote:
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?


It does indeed fit the standard clutch but you have to drill the holes out slightly bigger on the cover plate. Its a 5 min job.
There are plenty of how to's on here but am sure its 8mm.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 20:24
Cjwatson27

Seasoned Pro

Location: Oxford

Registered: 17 Sep 2013

Posts: 1,968

Status: Offline

Post #7
Hi did the seat mounts help lower the seat at all ? Some of the ones I've look like they allow the seat to sit lower than the mounts.l?

________________________________________

Old pugs don't die they just get faster
Posted 9th Aug 2016 at 20:32
barrym

Senior User

Location: Westcliff-on-sea

Registered: 26 Jun 2014

Posts: 502

Status: Offline

Post #8
6waysforward wrote:
barrym wrote:
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?


It does indeed fit the standard clutch but you have to drill the holes out slightly bigger on the cover plate. Its a 5 min job.
There are plenty of how to's on here but am sure its 8mm.


Thanks mate. yeah I have seen posts relating to this and as you say no big deal.

Will def have it off you when available please

________________________________________

China D Turbo HDi daily charger
Black Rallye occassional toy
Posted 9th Aug 2016 at 20:34
Robdog Rallye

Junior User

Location: Devizes

Registered: 03 Dec 2014

Posts: 55

Status: Offline

Post #9
Interested in the ultraleggeras when they're available! Yes

________________________________________

Low boost Rallye
RB182 Cup
Posted 9th Aug 2016 at 20:35
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #10
Cjwatson27 wrote:
Hi did the seat mounts help lower the seat at all ? Some of the ones I've look like they allow the seat to sit lower than the mounts.l?


Tbh i dont know as the car had been off the road for a few weeks when i changed the seats over. If anything i would say they were the same. Seats are still in so if you are local, come and have a test. There are pics of them in my project thread page 5.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 20:41
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #11
barrym wrote:
6waysforward wrote:
barrym wrote:
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?


It does indeed fit the standard clutch but you have to drill the holes out slightly bigger on the cover plate. Its a 5 min job.
There are plenty of how to's on here but am sure its 8mm.


Thanks mate. yeah I have seen posts relating to this and as you say no big deal.

Will def have it off you when available please


Will put it to one side for you mate.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 20:41
manthos

Seasoned Pro

Location: Norwich

Registered: 29 Apr 2009

Posts: 1,966

Status: Offline

Post #12
I'd like the oil cooler kit when available please

________________________________________

Team SUPERCHARGED

Ninja I LIVE FOR THE 306 Ninja

Old Project thread

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url =
Posted 9th Aug 2016 at 21:17
IvayloPavlov

Regular

Location: Sofia,Bulgaria

Registered: 06 Aug 2012

Posts: 265

Status: Offline

Post #13
I am interested from highboosted bottom end.What will be the price delivered to Guildford Surrey GU1 1RU?
Posted 9th Aug 2016 at 21:33
Tarmac terror

Regular

Location: Southampton

Registered: 20 Mar 2014

Posts: 458

Status: Offline

Post #14
Ill have the adjustable gear linkages please. Will need them posted though...


TT
Posted 9th Aug 2016 at 21:35
cully

Seasoned Pro

Location: Cullompton

Registered: 12 Jun 2013

Posts: 1,093

Status: Offline

Post #15
6waysforward wrote:
barrym wrote:
6waysforward wrote:
barrym wrote:
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?


It does indeed fit the standard clutch but you have to drill the holes out slightly bigger on the cover plate. Its a 5 min job.
There are plenty of how to's on here but am sure its 8mm.


Thanks mate. yeah I have seen posts relating to this and as you say no big deal.

Will def have it off you when available please


Will put it to one side for you mate.


Barry will also need the pressure plate to flywheel bolts i believe Thumbs up

have you a lightwieght crank pulley?
Posted 9th Aug 2016 at 21:37
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #16
cully wrote:
6waysforward wrote:
barrym wrote:
6waysforward wrote:
barrym wrote:
Dibs on the flywheel when it becomes available please bud!

I assume it will suit a standard clutch?


It does indeed fit the standard clutch but you have to drill the holes out slightly bigger on the cover plate. Its a 5 min job.
There are plenty of how to's on here but am sure its 8mm.


Thanks mate. yeah I have seen posts relating to this and as you say no big deal.

Will def have it off you when available please


Will put it to one side for you mate.


Barry will also need the pressure plate to flywheel bolts i believe Thumbs up

have you a lightwieght crank pulley?


Yup they will be included Smile

I do have a alloy crank pulley but i think its going with the charger kit. If it falls through, you will be 1st on the list mate.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 21:41
armzsc6

Seasoned Pro

Location: Crowborough

Registered: 22 Mar 2008

Posts: 3,445

Status: Offline

Post #17
Have txt you about the bottom end mate Smile

________________________________________

Black power baby! SUUUUUPERCHARGED Superman
Seat Leon FR TDI 190BHP 300lbft daily gti-6 killer :p
12x 306's owned so far

Cambelts, clutches, service work carried out on All makes and models, Peugeot Citroen / mitsubishi specialist.
Pug planet / Citroen Lexia diagnostics / code reads available.
Posted 9th Aug 2016 at 22:15
russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,458

Status: Offline

Post #18
Ph3 hubs 18mm type with good bearings if they came with the abs sensors (as they'll probably break when you take them out?)

and i would certainly not be collecting so could do with postage price?

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread
Posted 9th Aug 2016 at 22:24
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #19
russbez wrote:
Ph3 hubs 18mm type with good bearings if they came with the abs sensors (as they'll probably break when you take them out?)

and i would certainly not be collecting so could do with postage price?


To Inverness-Shire?? The postage would out weigh the cost of the hubs LOL

I can get a quote if you like when they are off.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 22:28
orta

Senior User

Location: East Mids

Registered: 02 Sep 2006

Posts: 860

Status: Offline

Post #20
Dude sucks that you're having to break this so soon after the feature. I'll take the b8 rear shocks if you'd do me a separate price?

I'll also take the flywheel if Barrym doesn't

________________________________________

CLUB BLACK RALLYE


||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar||
Posted 9th Aug 2016 at 22:52
6waysforward

Seasoned Pro

Location: Benfleet essex

Registered: 30 Oct 2005

Posts: 3,168

Status: Offline

Post #21
orta wrote:
Dude sucks that you're having to break this so soon after the feature. I'll take the b8 rear shocks if you'd do me a separate price?

I'll also take the flywheel if Barrym doesn't


Yeah i know but i cant be assed to fix it anymore mate. Fancy a change so it is what it is.

Tbh i would rather sell all the shocks together but if they dont sell soon, i will split and let you know.

________________________________________

***Breaking*** Ph3 Silver GTI 6 High Boost Superman




Posted 9th Aug 2016 at 23:09
marksorrento205

Seasoned Pro

Location: Airborne in the lanes

Registered: 26 Aug 2008

Posts: 2,220

Status: Offline

Post #22
If you are happy to courier

Alloy adjustable gear linkage rods Think they are miles ones £10 (if still available)
Genuine wishbones with peugeot partner p bushes and replaced with new bushes and 18mm bottom ball joints. Covered 30k £20 for the pair.
Group N top mount £10
Group N gearbox mount £10

Drop me a pm Smile

________________________________________

How to do a clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 10th Aug 2016 at 03:53
demondriverdan

Seasoned Pro

Location: Londinium

Registered: 29 Nov 2010

Posts: 2,665

Status: Offline

Post #23
I'll take the black masks, tempted by the Nissens rad as well

________________________________________

Rallye Race Car
Posted 10th Aug 2016 at 09:35
robthe6

Senior User

Location: northamptonshire

Registered: 06 Jun 2008

Posts: 667

Status: Offline

Post #24
Bored, decked and honed block for highboost covered 5-6k with crank/Wossner forged pistons, ms forged rods, arp bolts, acl heavy duty bearings, longmans refurbed oil pump. Built by midlife. £400 Once condition has been checked.

breaking end of august yea? Could i collect 2nd week of September?

Also can you confirm the rods and pistons with pictures. as iv just looked through your thread and there isn't any. also compression ratio please Thumbs up

________________________________________

1997 ph1 bianca GTI6 - The looker
1996 ph1 Sigma GTI6 - Dead Sad
1999 Red Rallye - The Daily
2005 Nissan Navara D40 - Family car
1968 Mustang Coupe - The dirty little secret
Put ya foot down, put ya foot down we'll loose em easy!
Posted 10th Aug 2016 at 13:37
manthos

Seasoned Pro

Location: Norwich

Registered: 29 Apr 2009

Posts: 1,966

Status: Offline

Post #25
2nd dips on the high boost block please

________________________________________

Team SUPERCHARGED

Ninja I LIVE FOR THE 306 Ninja

Old Project thread

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url =
Posted 10th Aug 2016 at 13:59

Pages (4): [1] 2 3 .. last

All times are GMT. The time is now 01:32

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.