Post #2076
Ever ending list lolhad the engine out for the seals and put it back in today. Also new pads as inners we’re down to the metal after last outing. Get it back out and test it but hopefully it will have sorted it
|
| Author | Subject: Day666 / 6 updates / 1% road 99% track/Race |
 blandy
Seasoned Pro  Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
had the engine out for the seals and put it back in today. Also new pads as inners we’re down to the metal after last outing. Get it back out and test it but hopefully it will have sorted it |
 Posted 28th Oct 2018 at 19:27
|
|
|
Day666
Seasoned Pro  Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2077
quote: [quote="blandy"] Ever ending list lol had the engine out for the seals and put it back in today. Also new pads as inners we’re down to the metal after last outing. Get it back out and test it but hopefully it will have sorted it Yes ....totally agree..lol Well bloody good luck I’m sure it’s sorted now  PS ...pair of doors / pair of wings and front bumper all gone in for spraying today ...should hopefully get them back 15th Nov all being well fingers crossed ..... |
|
Posted 29th Oct 2018 at 17:10
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2078
Small update ....getting on with important things now panels have gone in ....Lifeline ...360 Gas mechanical fire extinguisher fitted .... Day666 has attached the following image: |
|
Posted 30th Oct 2018 at 17:39
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2079
Handle fitted Day666 has attached the following image: |
|
Posted 30th Oct 2018 at 17:41
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2080
New starter motor needed as mines on the way out ...Thought I’d give this a try as it’s reduced geared and lighter as a bonus  http://www.brise.co.uk/Peugeot-141404PGR.html Not to bad a price either |
|
Posted 31st Oct 2018 at 12:35
|
|
|
devere
Senior User  Location: Saxtead Registered: 16 Dec 2008 Posts: 810 Status: Offline |
Post #2081
Be careful with the brise starter. I got one as I thought it would be an improvement over standard. But it was f**king useless. It wouldn't engage with the flywheel and just made a terrible noise of teeth clashing instead of turning the engine. Sent it back. May have been a bad one? |
|
Posted 31st Oct 2018 at 18:24
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2082
quote: [quote="devere"]Be careful with the brise starter. I got one as I thought it would be an improvement over standard. But it was f**king useless. It wouldn't engage with the flywheel and just made a terrible noise of teeth clashing instead of turning the engine. Sent it back. May have been a bad one? Thank you for the info ....fingers crossed How’s your car doing ? |
|
Posted 3rd Nov 2018 at 07:11
|
|
|
devere
Senior User Location: Saxtead Registered: 16 Dec 2008 Posts: 810 Status: Offline |
Post #2083
Had to have a new gearbox mount made as the last one cracked into 3 pieces. Just fatigue presumably as there isn't a lot of give in it. Made with slightly thicker metal this time too. Apart from that it's in one piece waiting for me to decide to use it again! 😂 |
|
Posted 3rd Nov 2018 at 07:31
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2084
quote: [quote="devere"]Had to have a new gearbox mount made as the last one cracked into 3 pieces. Just fatigue presumably as there isn't a lot of give in it. Made with slightly thicker metal this time too. Apart from that it's in one piece waiting for me to decide to use it again! 😂 Brilliant Your car does get a lot of punishment when you use it Enjoying it ..is what it is all about |
|
Posted 3rd Nov 2018 at 07:50
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2085
Small update ...Flattened and filled the Carbon Splitter David Warren sold me a while ago Came out amazing with x3 coats of UV laquer. Day666 has attached the following image: |
|
Posted 3rd Nov 2018 at 17:17
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,878 Status: Offline |
Post #2086
 looks spot on! ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 4th Nov 2018 at 20:32
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2087
quote: [quote="gnrlee"] looks spot on! It’s 100% amazing ...If I ever damaged it ...which is very luckily seeing how low it’s running ....could you ever make me another ? It looks amazing when assembled with other bits ... |
|
Posted 4th Nov 2018 at 21:20
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2088
Small but significant update  Both Composite doors back sprayed ...ok they pulled my pants down on price but only gave them the doors Last Thursday...and amazing top end job With the formed Carbon door panels on you wouldn’t tell them from metal Day666 has attached the following image: |
|
Posted 5th Nov 2018 at 14:30
|
|
|
blandy
Seasoned Pro Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2089
Looks stunning, must be getting close to finish now? |
|
Posted 5th Nov 2018 at 15:52
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2090
quote: [quote="blandy"]Looks stunning, must be getting close to finish now? I recon x4 fulls days before the 19th Nov should do it ... The cage won’t be modified 100% in time ...where I had to cut 1/2 of the bottom cross bar out to sink tank into the rear seat area ...but that won’t cause any issues for the day as the cage is so OTT anyway |
|
Posted 5th Nov 2018 at 16:43
|
|
|
blandy
Seasoned Pro Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2091
You still looking to do the 19th then? I want to book my car in for suspension set up. There’s a place near Combe but need to leave it for day so may book the 19th and pop over |
|
Posted 5th Nov 2018 at 16:51
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2092
quote: [quote="blandy"]You still looking to do the 19th then? I want to book my car in for suspension set up. There’s a place near Combe but need to leave it for day so may book the 19th and pop over Yes as long as it’s dry as I only have DZO3G tyres at mo and I want to try it first in total dry Mike Will Does Suspension setting up ? He’s got everything |
|
Posted 5th Nov 2018 at 17:46
|
|
|
blandy
Seasoned Pro Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2093
I’m looking to take it to josh Harvey who races a civic in hot hatch, didn’t know will did it tbh |
|
Posted 5th Nov 2018 at 18:37
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2094
quote: [quote="blandy"]I’m looking to take it to josh Harvey who races a civic in hot hatch, didn’t know will did it tbh Josh is meant to be Amazing Mike ...he specilizies in this ....Wills good all rounder but Josh is the kiddie Any idea what sort of money it may cost ? |
|
Posted 5th Nov 2018 at 20:12
|
|
|
blandy
Seasoned Pro Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2095
Around £100-£150 for full set up inc corner weighting ect. Hopefully make all the difference. What’s the deal with the 19th as not advertised anywhere? I’ll prob try and book in 19th and pop along give me something to do whilst he has the car and also somewhere I can park up with a trailer. May even so a passenger lap - learn how it’s done properly |
|
Posted 5th Nov 2018 at 20:41
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2096
quote: [quote="blandy"]Around £100-£150 for full set up inc corner weighting ect. Hopefully make all the difference. What’s the deal with the 19th as not advertised anywhere? I’ll prob try and book in 19th and pop along give me something to do whilst he has the car and also somewhere I can park up with a trailer. May even so a passenger lap - learn how it’s done properly Yes brilliant Mike .... It’s a charity event ....closed and invitation only ....I’m inviting you lol Donate a small amount for getting taken around to Dorothy house ...10 cars being used and only x3 on the track at once .... |
|
Posted 6th Nov 2018 at 04:36
|
|
|
blandy
Seasoned Pro Location: Bucks Registered: 25 Feb 2007 Posts: 2,437 Status: Offline |
Post #2097
well im booked in so will definitely pop along you doing passenger rides? |
|
Posted 6th Nov 2018 at 14:56
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2098
quote: [quote="blandy"]well im booked in so will definitely pop along you doing passenger rides? Yes as long as my car behaves it’s self...lol If it’s raining I won’t be taking the car  |
|
Posted 6th Nov 2018 at 17:28
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2099
Small update Received the Motorsport Starter motor and what quality it is .....I’m hoping what MARTIN said in the earlier post about them turn out wrong because it’s a lovely bit of kit .... Should know by tomorrow? Day666 has attached the following image: |
|
Posted 6th Nov 2018 at 17:31
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,209 Status: Offline |
Post #2100
Looks quite a bit smaller than standard one ?Amazing workmanship... Fingers crossed Day666 has attached the following image: |
|
Posted 6th Nov 2018 at 17:32
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.