|
displaying posts 1 to 3 of 3
| Author | Subject: c5 wheel bolts |
 v6saloon
Senior User  Location: Ilkeston Registered: 24 Sep 2010 Posts: 619 Status: Offline |
Post #1
Would these be ok to use on c5 "steelies"? http://m.ebay.co.uk/itm/111761563514 thanks in advance :-) ________________________________________ 205 mi16405 Mi16x4 restoration project 406 v6 saloon track car project/daily driver 508 Hdi |
 Posted 23rd Sep 2015 at 10:51
|
|
|
v6saloon
Senior User Location: Ilkeston Registered: 24 Sep 2010 Posts: 619 Status: Offline |
Post #2
or would these be better?http://m.ebay.co.uk/itm/161672686710 ________________________________________ 205 mi16405 Mi16x4 restoration project 406 v6 saloon track car project/daily driver 508 Hdi |
|
Posted 23rd Sep 2015 at 10:52
|
|
|
ben tearle
Regular  Location: Nantwich Registered: 24 Sep 2008 Posts: 107 Status: Offline |
Post #3
v6saloon wrote: These are the correct ones, last week I purchased 16 x FEBI 30400 bolts from ebay, as after speaking to my local Citroen dealer it gave me no confidence that the bolts they wanted to sell me had a loose washer. Just wish I'd seen these as I paid £38 for 16 and then they only sent 15! If you can wait, 16 x can be had for £27.71 but they come from Germany: http://www.ebay.co.uk/itm/16x-Febi-30400-Wheel-Wheel-Screw-M12-X-1-5-Mm-Citroen-Fiat-Peugeot-/281713093513?hash=item419768ab89:g:VzEAAOxynwlTc2wc |
|
Posted 23rd Feb 2016 at 13:34
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.