|
displaying posts 1 to 3 of 3
| Author | Subject: mi16 tap |
 v6saloon
Senior User  Location: Ilkeston Registered: 24 Sep 2010 Posts: 619 Status: Offline |
Post #1
Hi guysLooking for a bit of advice, got a 205 mi16 and when it gets hot it taps really loudly, when it's cold it's not that bad at all, still there but not that noticeable, could it be bent valves or is it more likely to be the lifters as it gets so much worse when hot? Thanks :-) ________________________________________ 205 mi16405 Mi16x4 restoration project 406 v6 saloon track car project/daily driver 508 Hdi |
 Posted 13th Sep 2015 at 09:33
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
what oil have you got in it?with the age of them it wouldn't surprise me if there was a sticky tappet or a failed one. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Sep 2015 at 12:50
|
|
|
v6saloon
Senior User Location: Ilkeston Registered: 24 Sep 2010 Posts: 619 Status: Offline |
Post #3
welshpug! wrote: what oil have you got in it? with the age of them it wouldn't surprise me if there was a sticky tappet or a failed one. Just serviced it with Mobil 1 10-40 semi, was the same before the service too ________________________________________ 205 mi16405 Mi16x4 restoration project 406 v6 saloon track car project/daily driver 508 Hdi |
|
Posted 13th Sep 2015 at 14:46
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.