|
displaying posts 1 to 4 of 4
| Author | Subject: Full Oil Cooler Setup |
 RetroPug
Seasoned Pro  Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #1
Does anyone have a full oil-cooler setup for sale?That'd be including hoses, fittings, cooler, thermostat etc. Ideally a decent-sized one for track so bigger than 13row if possible. Cash waiting if someone has what I need! ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
 Posted 16th Jun 2015 at 12:40
|
|
|
prism7guy
Seasoned Pro  Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,637 Status: Offline |
Post #2
I've just removed mine from my track car, thermostatic take off plate, all hoses and two oil coolers.I'll get some fresh pics tonight if you're interested, there are some older pics somewhere in my project thread if you want to have a search in the mean time.  ________________________________________ Goldie the track car. |
|
Posted 16th Jun 2015 at 12:47
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #3
Absolutely interested and will have a look at the project thread this evening. Please do get some pics of the parts.  ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 16th Jun 2015 at 12:56
|
|
|
prism7guy
Seasoned Pro Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,637 Status: Offline |
Post #4
Just taken some photos of it all as it stands, not photographed is the part that runs through the thermostatic plate which screws into the heat exchanger, and the filter then screws onto. This part is included but is currently sat in the heat exchanger so it can't be lost.     I'll even chuck in the lower aluminium brackets that i bent then had anodised which connect it to the crossmember, all you'd need to fit this is three m6 rubber bobbins which are available on ebay.  ________________________________________ Goldie the track car. |
|
Posted 16th Jun 2015 at 20:51
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.