displaying posts 1 to 25 of 52

Pages (3): [1] 2 3

Author Subject: BREAKING Black GTi6 - Somerset
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline

Post #1
I’m breaking a 1998 ph2 GTi6 in black. Dials are showing 130k miles. Bottom end was changed approx 15k ago and the head was rebuilt (Invoices included).

Delivery on most items is no problem at competitive prices. All parts are available so just ask. A basic list below.

Engine/Suspension

Engine minus the crank pulley and flywheel £275

Gearbox. Clutch is knackered so unable to give it a good test to ensure box is good, so selling cheap at £20

Nissens aluminium radiator £40

Solid rear lower engine mount £25

Adjustable gear rods £25 set

Rear beam complete minus calipers. £100

Fuel pump £15

Master cylinder £15

PAS high pressure pipe £20

Battery top clamp £5

Hubs (16mm) complete with ABS sensors £35 pair

Crank sensor £10

GTi6 front brake calipers with sliders and pads if required £45

Standard shocks and lowering springs £20

Fuel inertia switch £5

Fuel pump relay £15

Heater matrix hoses £5

OE wishbones ideal donors for fitting rollerbearings £15 pair

OE wishbones with powerflex bushes £25 pair

Master cylinder £15

Fans and cowling (complete with relays) £25

Steering rack with ram £20

Driveshafts £30 pair

Subframe £15


Panels/exterior:

Crystal headlights £30 pair

Front bumper £40

Rear bumper £20

Wings £10 each

Sideskirts £25 pair

Doors £20 each

Ph3 bonnet £30

Tailgate with wiper motor. Small rust spot £20

Ph3 spoiler (faded) £20

Ph2 spoiler (faded) £10

Grill £10

Hockey sticks £5 pair

Rear lights £10 pair

Front wiper motor £10




Interior:

GTi half leather/alcantara interior SOLD

Ph3 door cards £20 pair

Indicator twin optic light/fog stalk £10

Wiper stalk £5

Ph3 stealth parcel shelf with speakers £20

Heater motor £10

Silver centre console and vents £15

Clocks with 130,000 miles £10

Handbrake centre console and cubby box and ashtray £5

Steering column cowling £5

Radio control stalk £5

Interior mirror covers £5 pair

Visors £5 pair

Auto windscreen sensor £5

Clock/temp display £5

Heated rear screen/hazard switch £5 pair

Set of seatbelts, complete £5

Door shut looms £10 each



All prices are plus postage. I won't ship panels or larger items. I will have the shell for a few weeks so for any obscure requests, by all means PM me.

dangti6 has attached the following image:

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 9th Nov 2014 at 17:50
    paulgt

    Newbie

    Location: Grantham

    Registered: 23 Oct 2014

    Posts: 42

    Status: Offline

    Post #2
    Pm'd you mate

    ________________________________________

    306 GTI 6 Track Car in the making....
    Evo 5 GSR 360bhp....for now
    Posted 9th Nov 2014 at 17:56
    t3ora

    Regular

    Location: England

    Registered: 22 Dec 2009

    Posts: 316

    Status: Offline

    Post #3
    Ave you got a drivers side window switch

    ________________________________________

    Road/track car coming together slowly
    Posted 9th Nov 2014 at 18:44
    barrym

    Senior User

    Location: Westcliff-on-sea

    Registered: 26 Jun 2014

    Posts: 502

    Status: Offline

    Post #4
    Could you please describe the condition of the front bumper?

    EDIT: actually don't worry bud, just read you won't ship larger items

    ________________________________________

    China D Turbo HDi daily charger
    Black Rallye occassional toy
    Posted 9th Nov 2014 at 19:07
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #5
    t3ora wrote:
    Ave you got a drivers side window switch


    I have. I need to test the mirror functionality on my HDi to ensure it's in good working order. I'll check and be in touch

    barrym wrote:
    Could you please describe the condition of the front bumper?


    I notice you are a fair distance. I don't post bumpers.

    But here are some pics of it:







    Some marks but more than presentable.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 9th Nov 2014 at 19:08
    barrym

    Senior User

    Location: Westcliff-on-sea

    Registered: 26 Jun 2014

    Posts: 502

    Status: Offline

    Post #6
    haha simultaneous posts. Edited my post above.

    I will continue to prep my spare bumper for painting

    ________________________________________

    China D Turbo HDi daily charger
    Black Rallye occassional toy
    Posted 9th Nov 2014 at 19:09
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #7
    Parts provisionally sold:

    Gear rods
    Wishbones with polybushes
    Radiator

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 10th Nov 2014 at 19:01
    t3ora

    Regular

    Location: England

    Registered: 22 Dec 2009

    Posts: 316

    Status: Offline

    Post #8
    Any luck with the window switch mate

    ________________________________________

    Road/track car coming together slowly
    Posted 11th Nov 2014 at 20:17
    cully

    Seasoned Pro

    Location: Cullompton

    Registered: 12 Jun 2013

    Posts: 1,093

    Status: Offline

    Post #9
    carfull with the window switch as there were 2 or 3 different types fitted throught the phase's
    make sure it has the correct number of pins in the connector plugs or it wont work
    Posted 11th Nov 2014 at 20:29
    Cjwatson27

    Seasoned Pro

    Location: Oxford

    Registered: 17 Sep 2013

    Posts: 1,968

    Status: Offline

    Post #10
    What are the door looms like mate ?

    ________________________________________

    Old pugs don't die they just get faster
    Posted 11th Nov 2014 at 21:49
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #11
    t3ora wrote:
    Any luck with the window switch mate


    Haven't had chance yet to be honest with it p**sing down in the evenings. As above, let me know how many pins yours is and I'll see if I can help.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 11th Nov 2014 at 22:45
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #12
    Cjwatson27 wrote:
    What are the door looms like mate ?


    I'll have a nosey for you when I get a sec.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 11th Nov 2014 at 22:45
    cammson

    Junior User

    Location: Fort William

    Registered: 07 Mar 2009

    Posts: 71

    Status: Offline

    Post #13
    P.M'd

    ________________________________________

    Blaze - SOLD
    Team Astor! - SOLD
    Black - SOLD
    Moonstone - SOLD
    Cherry Red Rallye - SOLD
    Posted 12th Nov 2014 at 21:37
    Cjwatson27

    Seasoned Pro

    Location: Oxford

    Registered: 17 Sep 2013

    Posts: 1,968

    Status: Offline

    Post #14
    dangti6 wrote:
    Cjwatson27 wrote:
    What are the door looms like mate ?


    I'll have a nosey for you when I get a sec.


    Cheers be nice to get it sorted well its off the road Thumbs up

    ________________________________________

    Old pugs don't die they just get faster
    Posted 12th Nov 2014 at 21:45
    Maccer

    Newbie

    Location: Winchester

    Registered: 12 Dec 2013

    Posts: 30

    Status: Offline

    Post #15
    Hi,

    What is the condition of the rear bumper like? I would be interested in the front and rear bumper and the hockey sticks, will be in the west country 1st weekend of December.

    ________________________________________

    Team Aircon Rallye
    Posted 13th Nov 2014 at 08:35
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #16
    Maccer wrote:
    Hi,

    What is the condition of the rear bumper like? I would be interested in the front and rear bumper and the hockey sticks, will be in the west country 1st weekend of December.



    The back bumper has some overspray to the top from where the panel underneath the boot has been painted. It may polish out. I'll have a good look over it in the light and let you know.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 13th Nov 2014 at 21:48
    pinkfloyd

    Senior User

    Location: Ellesmere port

    Registered: 03 Oct 2006

    Posts: 929

    Status: Offline

    Post #17
    Have you got a good bottom hose (push in type) and a header tank cap?

    ________________________________________

    Liverpool Motor Club Sprint champion 2017
    Longton & District Motor Club Sprint champion 2017
    Liverpool Motor Club Sprint champion 2016
    Liverpool Motor Club Sprint champion 2015
    Lancashire & Cheshire Speed Championship
    Winner 2014
    2nd 2013
    Winner 2012
    2nd 2011
    Winner 2010
    Winner 2009
    Winner 2008
    Winner 2007
    2nd 2006.
    Posted 13th Nov 2014 at 20:22
    jeffers Forum Admin

    Location: Leeds

    Registered: 14 Dec 2003

    Posts: 3,702

    Status: Offline

    Post #18
    Dan does the fuel pump appear ok? no untoward noises or anything?

    ________________________________________

    Team Running Engine again!
    Team Negative Camber!
    My Budget track engine build thread!
    Now appearing at a Trackday near you!!Hyper Hyper
    Posted 14th Nov 2014 at 09:58
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #19
    pinkfloyd wrote:
    Have you got a good bottom hose (push in type) and a header tank cap?


    I do. I'll remove them and be in touch.

    jeffers wrote:
    Dan does the fuel pump appear ok? no untoward noises or anything?


    The fuel pump makes a nice strong and consistent priming noise on ignition. No other noises to suggest any issues, no.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 14th Nov 2014 at 11:02
    pinkfloyd

    Senior User

    Location: Ellesmere port

    Registered: 03 Oct 2006

    Posts: 929

    Status: Offline

    Post #20
    dangti6 wrote:
    pinkfloyd wrote:
    Have you got a good bottom hose (push in type) and a header tank cap?


    I do. I'll remove them and be in touch.

    jeffers wrote:
    Dan does the fuel pump appear ok? no untoward noises or anything?


    The fuel pump makes a nice strong and consistent priming noise on ignition. No other noises to suggest any issues, no.


    Cheers Thumbs up

    ________________________________________

    Liverpool Motor Club Sprint champion 2017
    Longton & District Motor Club Sprint champion 2017
    Liverpool Motor Club Sprint champion 2016
    Liverpool Motor Club Sprint champion 2015
    Lancashire & Cheshire Speed Championship
    Winner 2014
    2nd 2013
    Winner 2012
    2nd 2011
    Winner 2010
    Winner 2009
    Winner 2008
    Winner 2007
    2nd 2006.
    Posted 15th Nov 2014 at 10:03
    lj_6

    Regular

    Location: Bristol

    Registered: 19 Jan 2010

    Posts: 246

    Status: Offline

    Post #21
    Are the Crystal headlights in good condition with all mounts intact ?
    Also if they are would you be willing to sell the blank plugs for the door card bolts ( front top of door card)
    Also the blank plugs for the headlining driver side where the grab handle would be.
    Just a few obscure bits. Lol

    ________________________________________

    Astra burg #365 Garrett Power
    '99 bodied 6 track project
    Posted 15th Nov 2014 at 15:16
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #22
    The crystals on this one had the usual bottom clips missing - but I've a got a great set on the shelf with all clips in tact. There should be a thread on here for those with pics.

    Can also do those blanking bits no problem.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 15th Nov 2014 at 15:19
    jeffers Forum Admin

    Location: Leeds

    Registered: 14 Dec 2003

    Posts: 3,702

    Status: Offline

    Post #23
    Dan if you can wait til Thursday, (payday) il take the fuel pump! Thumbs up

    ________________________________________

    Team Running Engine again!
    Team Negative Camber!
    My Budget track engine build thread!
    Now appearing at a Trackday near you!!Hyper Hyper
    Posted 15th Nov 2014 at 16:23
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline

    Post #24
    That's fine Lee, I'll leave it to one side for you.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard


  • Posted 15th Nov 2014 at 20:52
    jeffers Forum Admin

    Location: Leeds

    Registered: 14 Dec 2003

    Posts: 3,702

    Status: Offline

    Post #25
    Cheers mate, send me payment details and delivered price. Il send the money Thursday morning! Thumbs up

    ________________________________________

    Team Running Engine again!
    Team Negative Camber!
    My Budget track engine build thread!
    Now appearing at a Trackday near you!!Hyper Hyper
    Posted 16th Nov 2014 at 08:11

    Pages (3): [1] 2 3

    All times are GMT. The time is now 05:48

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.