Im looking to get some more wheels for the race car and wanted to get some Speedlines which are the same as the BTCC ones, the SL 2118s are the only ones you can get that are pretty close if not the same. I just didn't want Team Dynamic wheels. ok these are not as light at 8 kgs a wheel.

Direct fitment ones are hard to get as many are Ford fitment or are 6x15. The Clio boys love them.

I wanted direct fitment and 7x15 and in Anthacite, sadly Speedline will one do a minimum order of 24 wheels, so who else is up for a set?

I have a few in already so just need a couple more to make the number up.

they will be £120 per wheel inc vat so £480 a set which is a bargain. Payment would be up front so no messing around and they take 6-8 weeks to make. If more then 24 wheels then that's fine, but that is the minimum that I need to get an order done.



1, Carl Chambers 8 wheels PAID
2, Phillip Bettinson 5 wheels PAID
3, Dave Roberts 6 wheels HALF PAID
5, Herjo Ras 4 wheels PAID

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

I have borrowed one from a Clio to check clearance but my BTCC ones clear the 300mm brakes with AP calipers and also clear the 406 Brembos with Xantia discs no problem.

these are almost exact to the BTCC ones as found with the Clio one so will get a pic up of them side by side.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

I do like them. Anyone interested in a 16" group buy?

________________________________________

205 GTi Red - G939 RTU - Died!
306 GTi 6 Diablo - Being resurrected! Project Thread

Looking for:
VTS P1 Rack
PR1.2 16"

Seems to only available in 5.5 x 16
http://www.speedlinecorse.co.uk/motorsport/cat2118.htm

________________________________________

Turned 40 and in true cliched fashion buying one of the cars of my teenage dreams!

16s are for girls!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

I bought some 330mm brembos as they were cheap Nd I'm tied to them now. 288s weigh more than the moon.

________________________________________

205 GTi Red - G939 RTU - Died!
306 GTi 6 Diablo - Being resurrected! Project Thread

Looking for:
VTS P1 Rack
PR1.2 16"

sorry wont fit over my brakes

________________________________________

Heres a set on my old V6 306 wrapped in Yoko a048s. Awesome wheels
I was running 288mm discs with wilwood callipers

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Very interested but would they do a set in white? Or has it got be all same colour?

I do. Just can't afford them right now. Would they fit my 205? 309 rear beam may make them abit tight.

________________________________________

205 GTi-6 every day motor
205 GTi-6 weekend/track car - project 230 N/A fingers crossed.

ok Craig has dropped out so need one more person to fill the order.

remember these will be direct fit 7x15 wheels, no spacers.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Does anyone know if these will clear the 406 brembo's with the 288mm V6 discs?

________________________________________

See the sheer power and might of the lesser known burrowing owl.

Cheers my love.

________________________________________

See the sheer power and might of the lesser known burrowing owl.