Post #26
Is it possible to fabricate one to fit ? Ive just read Adam v6 build so i though you might know ________________________________________
Old pugs don't die they just get faster
|
displaying posts 26 to 41 of 41
Pages (2): 1 [2]
| Author | Subject: Lower Brace |
 Cjwatson27
Seasoned Pro  Location: Oxford Registered: 17 Sep 2013 Posts: 1,968 Status: Offline |
|
 Posted 6th Sep 2014 at 21:26
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #27
probably could, but with the cutting and strengthening that is done to get the V6 in I doubt there is need t, there definitely isn't any space due to the sump, gearbox and rear exhaust manifold.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 7th Sep 2014 at 10:57
|
|
|
aaron6
Seasoned Pro  Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #28
Anything can fabricated. I measured up my 6 and fabricated mine and all the others which were fine. You'd just need to have a measure up. ________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 7th Sep 2014 at 13:19
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #29
yeah, but there's nowhere for one to fit with a V6 lump  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 7th Sep 2014 at 13:22
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #30
To save answering half a dozen PM's with the same thing - I do have enough bent up to make about another half a dozen, just need time to get up to the workshop and cut and weld them up sometime this week hopefully.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 7th Sep 2014 at 16:57
|
|
|
vandal.pr!
Junior User  Location: Zadar, Croatia Registered: 18 May 2008 Posts: 63 Status: Offline |
Post #31
Any update on this phillipm?________________________________________ Peugeot 306 s16 '97--- |
|
Posted 6th Nov 2014 at 20:09
|
|
|
jamiek_uk2000
Seasoned Pro  Location: Llanelli Registered: 18 Apr 2009 Posts: 1,925 Status: Offline |
Post #32
He is no longer a member. He is on 306oc though________________________________________ 205 GTi Red - G939 RTU - Died!306 GTi 6 Diablo - Being resurrected! Project Thread Looking for: VTS P1 Rack PR1.2 16" |
|
Posted 6th Nov 2014 at 20:16
|
|
|
mik
Seasoned Pro  Location: Kent Registered: 17 Feb 2011 Posts: 2,100 Status: Offline |
Post #33
...or you could get the subframe seam-welded for a similar effect. A bit more dismantling though. ________________________________________ Cherry Rallye SOLD |
|
Posted 6th Nov 2014 at 22:08
|
|
|
orta
Senior User  Location: East Mids Registered: 02 Sep 2006 Posts: 860 Status: Offline |
Post #34
jamiek_uk2000 wrote: He is no longer a member. He is on 306oc though Do you know his username over there? Tried searching for phillipm and nothing! I'm after one of these as well !! ________________________________________ CLUB BLACK RALLYE||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar|| |
|
Posted 8th Nov 2014 at 07:11
|
|
|
gilesy
Seasoned Pro  Location: Greenwich - in that London Registered: 03 Apr 2006 Posts: 5,133 Status: Offline |
Post #35
orta wrote: jamiek_uk2000 wrote: He is no longer a member. He is on 306oc though Do you know his username over there? Tried searching for phillipm and nothing! I'm after one of these as well !! AnalSpermBandit87 |
|
Posted 8th Nov 2014 at 22:45
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #36
http://306oc.co.uk/forum/user-152.html ________________________________________  |
|
Posted 8th Nov 2014 at 22:58
|
|
|
thomo6
Regular  Location: York Registered: 17 Oct 2010 Posts: 104 Status: Offline |
Post #37
I am also interested in one but do not have enough posts on 306oc site to be able to contact him directly. Can some one who has message him to see if anymore will be available? Many thanks. |
|
Posted 9th Nov 2014 at 11:44
|
|
|
orta
Senior User Location: East Mids Registered: 02 Sep 2006 Posts: 860 Status: Offline |
Post #38
Cheers Dan. I've messaged him and I mentioned it was you as well thomo.________________________________________ CLUB BLACK RALLYE||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar|| |
|
Posted 9th Nov 2014 at 15:30
|
|
|
thomo6
Regular Location: York Registered: 17 Oct 2010 Posts: 104 Status: Offline |
Post #39
orta wrote: Cheers Dan. I've messaged him and I mentioned it was you as well thomo. Many thank orta, much appreciated. |
|
Posted 9th Nov 2014 at 17:23
|
|
|
orta
Senior User Location: East Mids Registered: 02 Sep 2006 Posts: 860 Status: Offline |
Post #40
thomo6 wrote: orta wrote: Cheers Dan. I've messaged him and I mentioned it was you as well thomo. Many thank orta, much appreciated. Update on this for you bud he's got back to me on oc and is currently a couple of weeks off completely a fresh batch. ________________________________________ CLUB BLACK RALLYE||B8s||60-70mm drop||Black Partner Steels||P1 VTS Rack||Refurbed Beam||Hybrid ARB||VTS Torsion Bar|| |
|
Posted 18th Nov 2014 at 14:07
|
|
|
burnout21
Regular  Location: Edge of the Pass Registered: 23 Apr 2008 Posts: 248 Status: Offline |
Post #41
Need to know about this batch when comes up for sale. I'd like one if he might get back on her to sell any? |
|
Posted 18th Nov 2014 at 14:42
|
|
Pages (2): 1 [2]
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.