|
displaying posts 1 to 2 of 2
| Author | Subject: what block? |
 rhyds
Regular  Location: llanybydder Registered: 15 Jun 2011 Posts: 140 Status: Offline |
Post #1
i've got an idea to build a muts nuts of an gti6 engine but been told several different ide what block to use some say 1.8 xsi, some say 206 140, some say mi16 if ut gets built it will have steel crank from a dturbo, billet steel flywheel, steel rods, forged pistons and a head with cams, port polished etc whats everyones thought? |
 Posted 14th Apr 2014 at 23:31
|
|
|
welshpug!
Capt Pedantic
 Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
EW10, lighter and stiffer than all the others, much newer so wont be shot, will take the TD crank too.Sandy Brown builds a bloomin good one. here's what an EW5 sounds like; http://youtu.be/RJYD1MDIyAQ its an XU5 crank in an XU7 block, full sandy brown build, 220 bhp. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 14th Apr 2014 at 23:40
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.
