|
displaying posts 1 to 8 of 8
| Author | Subject: 2 litre xsi block |
 rhyds
Regular  Location: llanybydder Registered: 15 Jun 2011 Posts: 140 Status: Offline |
Post #1
howdi after speaking to a few people about building a muts nuts of a gti6 engine, i've been told that some people use the block out of a 1.8 xsi with a gti6 head due to the xsi block being alloy so that much lighter i happen to have a 2 litre xsi engine here which i bought in error and was wondering if the 2 litre as well as the 1.8 xsi are alloy blocked |
 Posted 4th Apr 2014 at 10:48
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #2
just posted a reply and deleted it by mistake, the 2.0 xsi engine is the iron block from memory there was a thread on the 205forum with what engines were what, showed like the 405 mi16 alloy (early 1.9) and iron (2.0) ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 4th Apr 2014 at 10:55
|
|
|
welshpug!
Capt Pedantic
 Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #3
its the same block as the 6, may or may not have oil spray bars, same crank.the later EW 138 bhp 206 gti or 307 xsi are alloy block. 306 XSI are all 2.0's, 123 bhp 8v then 135 bhp 16v. Early XS was iron block TU5 90 bhp, later ones were 115 bhp XU7J4 allow blocks. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 4th Apr 2014 at 11:20
|
|
|
Cjwatson27
Seasoned Pro  Location: Oxford Registered: 17 Sep 2013 Posts: 1,968 Status: Offline |
Post #4
Defiantly iron mines still sat on the drive even the pikeys dont want it ________________________________________ Old pugs don't die they just get faster |
|
Posted 4th Apr 2014 at 15:56
|
|
|
rhyds
Regular Location: llanybydder Registered: 15 Jun 2011 Posts: 140 Status: Offline |
Post #5
Thanks for all the help |
|
Posted 4th Apr 2014 at 23:09
|
|
|
rhyds
Regular Location: llanybydder Registered: 15 Jun 2011 Posts: 140 Status: Offline |
Post #6
So i'd be ok getting a 1.8 16v alloy block out of a xs 306 & gti6 head on that? |
|
Posted 1st Jul 2014 at 22:49
|
|
|
jarrus464
Junior User  Location: Great Wyrley, Walsall Registered: 14 May 2007 Posts: 92 Status: Offline |
Post #7
Think the meridians had the 1.8 engine but be sure not to get an early one as they got 8v heads |
|
Posted 11th Jul 2014 at 16:02
|
|
|
allanallen
Seasoned Pro Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #8
'Meridan' was a trim level, they had various engines________________________________________ www.bridgecraftmotorsport.co.uk |
|
Posted 11th Jul 2014 at 19:56
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.
