|
displaying posts 1 to 10 of 10
| Author | Subject: chassis repair |
 chiefton
Seasoned Pro  Location: cranleigh Registered: 09 Dec 2012 Posts: 1,195 Status: Offline |
Post #1
Dont suppose any one has a set of the packers and the d shaped piece to repair the o/s chassis I think daveyboy on here makes, they would be willing to sell me?? Need one desperatly as car on axle stands and cant move it and will be refitting engine soon. Thanks ________________________________________ cherry rallye daily (the money pit) |
 Posted 6th Feb 2014 at 12:48
|
|
|
aaron6
Seasoned Pro  Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #2
Just fabricate 1. Thats all I did.    ________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 8th Feb 2014 at 08:26
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #3
Daveyboy does indeed make these, he normally carries out the complete service, but if the car is immobile he may be able to sell you just the part made up ready to weld in yourself.Drop him a PM. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 8th Feb 2014 at 09:18
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #4
Sorry, it's a full fit service only I'm afraid, because I form the curved part of my replacement piece by hand and test fit it. Once I'm happy with the fit I then drill the hole and weld the nut in the right place. I can't do that without a car to work from. Mines no good as the mount has been heavily bodged by a previous owner.I could saw out a mount from a scrap car for reference I suppose or if somebody wants to send me that part from a dead car then I would be able to make kits to sell, but finding the time never seems to happen. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Feb 2014 at 09:44
|
|
|
armzsc6
Seasoned Pro  Location: Crowborough Registered: 22 Mar 2008 Posts: 3,445 Status: Offline |
Post #5
If I had seen that the other day I've just scrapped a hdi estate shell and could have cut out the whole section for you. All we did for mine was cut a template to shape out of paper, marked out the position of the original hole then cut that out of metal and filed it down to shape at the edges. Welded that in nicely all the way round and job done. ________________________________________ Black power baby! SUUUUUPERCHARGED Seat Leon FR TDI 190BHP 300lbft daily gti-6 killer :p 12x 306's owned so far Cambelts, clutches, service work carried out on All makes and models, Peugeot Citroen / mitsubishi specialist. Pug planet / Citroen Lexia diagnostics / code reads available. |
|
Posted 8th Feb 2014 at 16:32
|
|
|
chiefton
Seasoned Pro Location: cranleigh Registered: 09 Dec 2012 Posts: 1,195 Status: Offline |
Post #6
Yeah iv got it being sorted tuesday,my mates a very good welder and is going to do it for me because my welding looks terrible!!Cheers ________________________________________ cherry rallye daily (the money pit) |
|
Posted 8th Feb 2014 at 18:28
|
|
|
chiefton
Seasoned Pro Location: cranleigh Registered: 09 Dec 2012 Posts: 1,195 Status: Offline |
Post #7
Yeah iv got it being sorted tuesday,my mates a very good welder and is going to do it for me because my welding looks terrible!!Cheers ________________________________________ cherry rallye daily (the money pit) |
|
Posted 8th Feb 2014 at 18:28
|
|
|
aaron6
Seasoned Pro Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #8
Be sure to put up before and after photos. ________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 9th Feb 2014 at 07:40
|
|
|
chiefton
Seasoned Pro Location: cranleigh Registered: 09 Dec 2012 Posts: 1,195 Status: Offline |
Post #9
aaron6 wrote: Be sure to put up before and after photos. yeah will do. There a picture of the damage on my project thread!! Its quite bad. ________________________________________ cherry rallye daily (the money pit) |
|
Posted 9th Feb 2014 at 10:58
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #10
armzs16 wrote: If I had seen that the other day I've just scrapped a hdi estate shell and could have cut out the whole section for you. All we did for mine was cut a template to shape out of paper, marked out the position of the original hole then cut that out of metal and filed it down to shape at the edges. Welded that in nicely all the way round and job done. I've got a template, but where I curve the sides of my repair patches they never come out exactly the same each time. (They are close but not identical) the hole can end up being out of line by three or four millimetres so that's why I make the plate then line up an drill the hole afterwards. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 9th Feb 2014 at 11:09
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.