displaying posts 1 to 14 of 14

Author Subject: my new black 6
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #1
Only just realised that I don't have a project thread up for my current 6. So some might remember that I bought a black 306 for £145, I fixed a few bits on her, but I really wasn't happy with the rust. So sold her on for £600 Smile
How I got her


How she left me


Anyhow after she was gone my partner decided she wanted another black 6, looked everywhere for one and finally found one in Wales lol. So a few messages and a bit of haggling later, I booked my flight and set off for my £300 6.
102k miles, cam belt done at 98k, interior was rather good, with just a small split at the seam of drivers seat. Had new back box fitted, came with new centre section, broken fog but came with one to replace.
She drove back with only one hiccup, my brake lights were staying on due to the switch on the peddle coming loose. Took me two hours to fix the fecker as had no tools and had to call Greenflag lol

How she came to me


First thing, good clean inside and change interior, as had a mint one from my last 6




Never seen dirt like it come from inside a car haha

New interior in


White bonnet and boot badge, new bonnet also fitted as other had a slight crease where it was closed to hard



I fitted the centre section at mot time in August. Just done discs and pads all round and full service. Also fitted her with white cyclones, can you guess the theme lol she also had a gold drivers door handle, changed that back to a black one.






So now I'm thinking lowered, and black masks?

What do you think
Posted 17th Jan 2014 at 14:36
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline

Post #2
Looking goodThumbs up

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 17th Jan 2014 at 14:41
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #3
thats what the bonnet went on that i got off you Smile actually you have seen this in the flesh
Posted 17th Jan 2014 at 14:44
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline

Post #4
I know, looks better now, actually didn't look that bad when I saw it... nice bargain.
Did you get the door loom sorted?

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 17th Jan 2014 at 14:45
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #5
i managed to get a loom, just havnt had it fitted yet. However it turns out that its really just the plug thats not connecting properly as its a bit green lol. So cleaned it up and the car locks now woooo. Just waiting to get time to fit the loom.

I have a door seal issue the now, water getting in, changed the seal but still no difference. its getting on my nerves
Posted 17th Jan 2014 at 14:49
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline

Post #6
Welcome back doll!
Posted 17th Jan 2014 at 17:20
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #7
Hey seb Smile
Posted 17th Jan 2014 at 20:18
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #8
so not sure if i should sell this or fit it? what u think?

Posted 18th Jan 2014 at 14:18
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #9
Couple bits done today bit weather was shocking. Inlet fitted, needs a clean

New steering wheel fitted. Not a great pic but 100% times better than I had

Any tips on how I clean up the engine bay?
Posted 26th Jan 2014 at 16:55
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #10
not really done much to her lately. Had a snapped spring so replaced it and thats about it haha. Oh and made the other half earn her keep Smile





Posted 19th Apr 2014 at 09:40
chiefton

Seasoned Pro

Location: cranleigh

Registered: 09 Dec 2012

Posts: 1,195

Status: Offline

Post #11
I loved my black 6 I had similar theme going too lol. I got sum black and white 'sticker bombed' fuel filler cap thingys if you fancy them can do both for 10 posted they set mine off nicely!!also got some carbon wrapped fuel cap inserts too.

looking good tho and that defo a billy bargain at £300!!

Good work mate keep it up!! Thumbs up

________________________________________

cherry rallye daily (the money pit)
Posted 19th Apr 2014 at 11:13
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #12
let me see a pic of the sticker bombed ones, was thinking maybe do them white?
Posted 19th Apr 2014 at 11:22
chiefton

Seasoned Pro

Location: cranleigh

Registered: 09 Dec 2012

Posts: 1,195

Status: Offline

Post #13
They look better in black and white rather than coloured...






these with carbon wrapped inserts look awesome!!

________________________________________

cherry rallye daily (the money pit)
Posted 19th Apr 2014 at 11:38
nadine

Senior User

Location: Dunfermline

Registered: 02 Mar 2008

Posts: 525

Status: Offline

Post #14
Hmmm not too sure on them. Might just carbon wrap the inserts
Posted 22nd Apr 2014 at 11:49

All times are GMT. The time is now 22:50

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.