|
displaying posts 1 to 25 of 30
Pages (2): [1] 2
| Author | Subject: New exhaust - Pro-Speed Cardiff |
 SmartyC
Regular  Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #1
I had a 2.25" cat back stainless system fitted by these guys on Saturday.Top job and great service, highly recommended. It's a tad boomy at the moment, but I'm expecting it to settle down over a week or two. I'll post again with an update. Will try to get a photo up also. ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
 Posted 13th Jan 2014 at 06:57
|
|
|
spiky
Seasoned Pro  Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #2
my 205 had one,i told them, make it as quiet as possible, and they did just that, perfect  ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 13th Jan 2014 at 08:13
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #3
What sort of price are these?________________________________________  |
|
Posted 13th Jan 2014 at 08:41
|
|
|
spiky
Seasoned Pro Location: Cardiff Registered: 13 Oct 2006 Posts: 2,310 Status: Offline |
Post #4
i paid £500, then i paid extra £50 for the 3rd box to go accross the back bumper(never used)mine for sale too, 2.5" ________________________________________ Do you need a 205 > 306 gti6 plug and go engine loom? PM METORQUES for all your braided fuel line needs MY YouTube Videos' SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP 268+BHP and 860kg = FUN |
|
Posted 13th Jan 2014 at 08:42
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #5
dangti6 wrote: What sort of price are these? £329  Bristol Pug wanted over £500 for the same, in mild steel, not fitted...!  ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 13th Jan 2014 at 12:03
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #6
SmartyC wrote: I had a 2.25" cat back stainless system fitted by these guys on Saturday. Top job and great service, highly recommended. It's a tad boomy at the moment, but I'm expecting it to settle down over a week or two. I'll post again with an update. Will try to get a photo up also. I'm pretty sure its less boomy already..... ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 13th Jan 2014 at 12:11
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #7
MUCH quieter today - the boom has completely gone and now it just sounds sweet!________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 14th Jan 2014 at 12:35
|
|
|
eliotrw
Seasoned Pro
 Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #8
I regret not going there tbh.________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 17th Jan 2014 at 11:28
|
|
|
306xsi
Junior User  Location: Suffolk Registered: 08 Feb 2006 Posts: 90 Status: Offline |
Post #9
Sounds like a decent place. Same price if you get it delivered and fit it yourself? Would be good to see a photo! |
|
Posted 17th Jan 2014 at 17:37
|
|
|
jimmyhackers
Seasoned Pro  Location: birmingham Registered: 14 Jun 2011 Posts: 1,093 Status: Offline |
Post #10
tip top exhaust fabbed up my whole decat system for 150 in under an hour.top job however my friend (complete nerd, unlike mental techno viking looking me) quite possibly got ripped by them, his rx7 decat system from the same bloke was 350 :S another mention was i did have to ask them to remove the swarf from the inside of the pipe before they welded them up. probably why my mates rx7 sounded so raspy as he never asked them to do so. ________________________________________ the world is changed by people in sheds |
|
Posted 17th Jan 2014 at 17:45
|
|
|
306xsi
Junior User Location: Suffolk Registered: 08 Feb 2006 Posts: 90 Status: Offline |
Post #11
jimmyhackers wrote: tip top exhaust fabbed up my whole decat system for 150 in under an hour. How did you manage to get it that cheap? They quoted me £300 + |
|
Posted 20th Jan 2014 at 13:05
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #12
306xsi wrote: Sounds like a decent place. Same price if you get it delivered and fit it yourself? Would be good to see a photo! A rough location/building, but the service and quality are top notch. Not sure about the self-fit option... I don't think they offer it, as they measure your car and old system, they don;t have off the shelf systems... ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 21st Jan 2014 at 12:46
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #13
Final post regarding the sound levels...The system has now settled down. No booming whatsoever on the motorway, just a very pleasant 'mid-deep' burble on idle, to classic 4 cylinger rasp as you let it fly. Lovely! I tried to get a photo up, but couldn't get it small enough - will try to do it via a link. HIGHLY RECOMMENDED http://www.pro-speedexhausts.com/ ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 21st Jan 2014 at 12:49
|
|
|
eliotrw
Seasoned Pro
Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #14
OH ffs.I might go there and get shot of this exhaust on here to be honest ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 21st Jan 2014 at 13:20
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #15
I doubt you'll be disappointed!!Here's mine... http://www.flickr.com/photos/martincurtisphotography/12076787036/ ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 21st Jan 2014 at 23:24
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #16
eliotrw wrote: OH ffs. I might go there and get shot of this exhaust on here to be honest Want to see and hear mine first? ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 21st Jan 2014 at 23:26
|
|
|
eliotrw
Seasoned Pro
Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #17
Might if we arrange that next time i'm in wales actually? Only 20 mins down the road so i could easily pop up________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 22nd Jan 2014 at 12:32
|
|
|
eliotrw
Seasoned Pro
Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #18
I would be having 2.5" bore though thats the only thing.________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 22nd Jan 2014 at 12:33
|
|
|
dcc
Senior User  Location: Wales Registered: 24 Feb 2009 Posts: 502 Status: Offline |
Post #19
whats wrong with your exhaust elliot________________________________________ 205 GTIXsara HDI |
|
Posted 22nd Jan 2014 at 13:38
|
|
|
clen666
Seasoned Pro  Location: Co. Durham Registered: 12 Feb 2009 Posts: 2,401 Status: Offline |
Post #20
Eliot, I thought you were happy with yours from Edwards?________________________________________ Team 'unintentional rat look' |
|
Posted 22nd Jan 2014 at 13:44
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #21
eliotrw wrote: Might if we arrange that next time i'm in wales actually? Only 20 mins down the road so i could easily pop up Cool. Pm me if u want to meet up. The bigger bore system will be noisier at cruising speeds, I gather... ________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 22nd Jan 2014 at 23:08
|
|
|
eliotrw
Seasoned Pro
Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #22
I was,But it drones like a f**king b**ch when it warm, I think its got louder again really. It a really weird exhaust, Sometimes you can drive it and its just right (If you dont touch anything after 3.5k its fine for a whole journey. If you blat it for a short 3 mins or so then the rest of your journey its loud as hell.) Ultimately i think i want the quietest possible 2.5 bore exhaust now. I might go back to edwards and speak to him about bigger boxes but to be honest i think he just doesnt "do" quiet. My guess is doing pretty much exclusively race cars means to him me car IS quiet as it is. BUt its the drone between 3k and 4k thats the killer ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 23rd Jan 2014 at 11:24
|
|
|
SmartyC
Regular Location: Chepstow Registered: 03 Nov 2013 Posts: 259 Status: Offline |
Post #23
Call Charlie - he willl advise.....________________________________________ SmartyMy lil toy: http://www.flickr.com/photos/martincurtisphotography/sets/72157640014140786/ |
|
Posted 23rd Jan 2014 at 17:09
|
|
|
gman
Seasoned Pro  Location: Didcot Registered: 25 Oct 2007 Posts: 1,471 Status: Offline |
Post #24
Is yours charged? Just wondering why you need such a large diameter?________________________________________ 1992 Onyx Black 205 GTI-62005 Honda S2000 (Sold) 2002 Audi S3 (Sold) 2005 Clio 182 Trophy (sold) |
|
Posted 23rd Jan 2014 at 17:22
|
|
|
eliotrw
Seasoned Pro
Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #25
It will be! Only thing i need is the charger itself. I have the kit , ecu, intercooler a pre cut mount and injectors. ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 23rd Jan 2014 at 18:25
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.
