|
displaying posts 1 to 4 of 4
| Author | Subject: Bilstein GRP A rear dampers |
 allanallen
Seasoned Pro  Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #1
Bilstein GRP A rear dampers(B46-2313) No leaks, all bushes and boots are good, just a bit of flaking/rust around the bottom of the body. They don't look to have done a lot to be honest. I run a set on the back of my 205 rally car with 21mm bars and they're fantastic, far superior to the 1038 grpN/challenge dampers. They're £264+ p&p off kamracing. Looking for £130 delivered. ________________________________________ www.bridgecraftmotorsport.co.uk |
 Posted 29th Dec 2013 at 13:34
|
|
|
allanallen
Seasoned Pro Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #2
I'll have another pair of these available shortly if anyone's interested?Al ________________________________________ www.bridgecraftmotorsport.co.uk |
|
Posted 18th Jun 2014 at 09:18
|
|
|
edhunter
Regular  Location: Sofia Registered: 29 Nov 2009 Posts: 118 Status: Offline |
Post #3
Hi,would thees be appropriate for 25.5mm torsions? |
|
Posted 18th Jun 2014 at 09:50
|
|
|
allanallen
Seasoned Pro Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #4
edhunter wrote: Hi, would thees be appropriate for 25.5mm torsions? No, probably ok for up to 23s. Ideal for 21s IMO Provisionally sold ________________________________________ www.bridgecraftmotorsport.co.uk |
|
Posted 18th Jun 2014 at 10:05
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.