|
displaying posts 1 to 4 of 4
| Author | Subject: Oil breather outlet OD and inlet Barb OD |
 raunchz
Regular  Location: Wythall, Birmingham Registered: 16 Jun 2013 Posts: 194 Status: Offline |
Post #1
I'm looking to plumb in an oil catch tank and the car is away getting some work done at the moment.Is anyone able to measure the OD of the oil breather outlet on the cam cover, and the OD of the barb on the inlet? It's just so I know what ID hose I need to plumb one in. I'm veering towards AN-10 as Im guessing -8 is going to be too small. Thanks in advance !!! |
 Posted 23rd Dec 2013 at 09:22
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #2
From memory, when I did away with the standard breather system and vented the cam cover to atmosphere, I believe I bought 1/2 inch ID hose and ran a metre of it from the cam cover to the bottom of the subframe which is where it still is today.________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 23rd Dec 2013 at 10:10
|
|
|
raunchz
Regular Location: Wythall, Birmingham Registered: 16 Jun 2013 Posts: 194 Status: Offline |
Post #3
stan_306gti6 wrote: From memory, when I did away with the standard breather system and vented the cam cover to atmosphere, I believe I bought 1/2 inch ID hose and ran a metre of it from the cam cover to the bottom of the subframe which is where it still is today. AN-8 has an ID of 1/2" so I'll go with that - saves me a few quid over AN-10 !! |
|
Posted 23rd Dec 2013 at 10:35
|
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #4
I say from memory, I did it in early 2008 so you may want to wait for somebody who has played with it recently to confirm.  ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone |
|
Posted 23rd Dec 2013 at 11:43
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.