Post #1
Has slight markings from one Conrad bearing.May polish out, or good for a regrind?
£10?
|
displaying posts 1 to 4 of 4
| Author | Subject: Hdi crank 88mm |
 c_j_m
Seasoned Pro  Location: Andover Registered: 23 Sep 2007 Posts: 1,917 Status: Offline |
May polish out, or good for a regrind? £10? |
 Posted 10th Dec 2013 at 18:27
|
|
|
superchargedblack1997gti6
Seasoned Pro  Location: guildford Registered: 15 Aug 2009 Posts: 2,376 Status: Offline |
Post #2
is this the crank that can make a 2.2 or 2.1 ?________________________________________ Super high boost Completed, destroyer of gearboxes and 160mph club |
|
Posted 10th Dec 2013 at 18:29
|
|
|
c_j_m
Seasoned Pro Location: Andover Registered: 23 Sep 2007 Posts: 1,917 Status: Offline |
Post #3
Yea same as the dt cranks.Iirc its 2088cc with one of these cranks and a 87mm over bore? |
|
Posted 10th Dec 2013 at 18:30
|
|
|
c_j_m
Seasoned Pro Location: Andover Registered: 23 Sep 2007 Posts: 1,917 Status: Offline |
Post #4
Prov sold. |
|
Posted 10th Dec 2013 at 21:17
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.