Hi all,

With the Rallye gone and some time, I've now gone through the garage to identity all my spares for sale (sorry Ross there's more than i thought!).

Sorry to list them all in the same thread (pretty sure I'm breaking my own rules) but hope that some of the below might be useful for someone:

Set of GTi6 front calipers complete with braided lines and Carbon Lorraine RC6 pads (4mm+) - £120
Pair of brand new Bendix 283mm discs (boxed and never opened) - £30
Set of brand new Textar front pads for standard calipers - £25
GTi6 PAS steering rack (no PAS ram and TREs will need replacing) - £20
Pair of GTi6 18mm front hubs c/w ABS sensors - £30
Pair of GTi6 driveshafts - £40
Pair of GTi6 wishbones (good bushes but no balljoints) - £20
Front ARB with rubber bushes (painted red) - £10
Offside rear trailing arm and hub, complete with brake caliper (think it's a GTi6 one...) - £20
Brand new offside (I think) crystal front fog light (still boxed, part number 6205.V9) - £20
GTi6 passenger airbag - £10
Rallye top glovebox - £10
BE gearbox (removed from phase 1 GTi6 about 6 years ago on about 80k) - £50
2 x brand new genuine PSA oil filter - £5 each
2 x Toyo R888 195/50 R15 GG rated 2-3mm tread - £30 each provisionally sold
Rubber engine top mount (fairly new) - £10

Got a few engine bits....

And then there's a whole load of odds and sods...

Genuine GTi6 cat - unknown condition so assume f**ked - £10 provisionally sold
3 x Genuine Peugeot backboxes - as above - £10 each
2 x Scorpion centre sections (probably got cracks or loose baffles) - £5 each
Standard centre section (no idea on condition but i must have kept for a reason) - £5
ABS Brake master cylinder and reservoir - £5
Standard fuel pump (just the pump, not the housing) - £free if you buy something else! provisionally sold
A virtually infinite number of flat-faced cyclone wheel bolts - £...no idea...


My preference is for all parts to be collected from York but I can meet within reason locally and will discuss postage if essential. Obviously everything is open to negotiation, so please just PM me if you need anything

Thanks,
Kev

________________________________________

Trackday, trackday, trackday

No worries mate - you've picked two of the highest quality items there, Mei!

Must be some way of getting them to you - how desparate are you?

________________________________________

Trackday, trackday, trackday

Ill take the two oil filters if you're able to post.
Also are the heads complete?
Cheers.

Thanks mate, let me know when/how you want payment.
Cheers

Any chance of backbox pics please?

I'll take the discs.

How much inc postage?

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Thanks all


Discussed as per PM


Ok, will try and do that later today. Although to set your expectation they look like every other back box...


Given the weight and delicate nature they'd probably cost quite a bit to pack and ship Ross. Might be more sensible to consider meeting somewhere?


I'm reckoning it'll be around £10 based on a quick interparcel search. So £40 posted?


Biggest cost is going to postage - again probably a £10-er! Also, I don't have any plastic etc so there's a chance they'll get a bit battered by the courier. Did you want both of them?

________________________________________

Trackday, trackday, trackday

I'm trying to gauge the level of inevitable French rust and how problematic they may be

pm'd

payment sent for heads!

________________________________________

Super high boost Completed, destroyer of gearboxes and 160mph club

How much for the front hubs and either a standard backbox or standard centre (I'll check which I need this weekend as one of them is blowing like a crack whore) posted please mate? Assuming the hubs aren't ovalled?

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660

PM'd

________________________________________

Richies Project Rallye

Electrical work carried out in Portsmouth

- Top Tip!!!