|
displaying posts 1 to 12 of 12
| Author | Subject: Alloy crank pulley |
 rallyeash
Seasoned Pro  Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline |
Post #1
After an gti6 alloy crank pulley, new or in very good condition. My one is 2 years old, covered about 2000 miles and worn on the keyway causing play and it's making a horrible chattering/knocking noise. Ash ________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here309 3dr K20 Type R |
 Posted 5th Aug 2013 at 21:52
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
Shouldnt be moving if the bolt is done up.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 5th Aug 2013 at 22:03
|
|
|
rallyeash
Seasoned Pro Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline |
Post #3
Bolt was done up properly and somehow the keyway In the alloy has worn, could just move it by hand when it was all done up, removed the bolt and had afew mm play each way and once the pulley was removed could see where the keyway has visibly worn out and where it has been moving on the crank. Hence I need a new one! ________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here309 3dr K20 Type R |
|
Posted 5th Aug 2013 at 22:37
|
|
|
rallyeash
Seasoned Pro Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline |
Post #4
bought one from Pug1off now.________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here309 3dr K20 Type R |
|
Posted 6th Aug 2013 at 12:47
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #5
Cool, made by bbm those are.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 6th Aug 2013 at 12:51
|
|
|
eliotrw
Seasoned Pro  Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #6
Nothing Pees me off more than 'tuners' selling parts made by other companies under their own brand when they didnt even do any of the R&D or even come up with the idea of it in the first place.Obviously all of them dont make their own bits, but theres a difference between getting someone to make something for you based upon your specification and buys something of someone who already sells it anyway and re branding it to fit your 'cool tuner/parts company' image. Examples Pug1off Spoox /end rant ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 6th Aug 2013 at 12:56
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #7
if it makes money...  people can find something cheaper if they look around ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 6th Aug 2013 at 12:57
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #8
BBM won't sell them direct though. ________________________________________  |
|
Posted 6th Aug 2013 at 12:59
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #9
if you phone up and say you're Tom Cruise and you need one i'm sure they would________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 6th Aug 2013 at 13:02
|
|
|
rallyeash
Seasoned Pro Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline |
Post #10
Correct, stew205 on drivers (bbm) makes them for Pug1off. He also has done a deal with pug1off that he won't sell direct so what else can you do?!Was £60 plus vat which ain't to bad anyhow. Plus If its as the picture is theres a proper flat section where the bolt tightens up against which will be much nicer for my dry sump pulley to locate against. The Rich W one I had before doesn't really have this. ________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here309 3dr K20 Type R |
|
Posted 6th Aug 2013 at 17:03
|
|
|
Teshboi1988
Regular  Location: Dartford Registered: 29 Jan 2012 Posts: 131 Status: Offline |
Post #11
rallyeash wrote: After an gti6 alloy crank pulley, new or in very good condition. My one is 2 years old, covered about 2000 miles and worn on the keyway causing play and it's making a horrible chattering/knocking noise. Ash i had same problem!!! but i got my pulley from pug1off so bought another from spoox n yea seems bang on ________________________________________ phase 3 Hatchback V reg 5Door GTi6 |
|
Posted 6th Mar 2014 at 07:57
|
|
|
walker_texasranger
Seasoned Pro  Location: Sunny Retford Registered: 26 Jan 2008 Posts: 2,502 Status: Offline |
Post #12
This thread made me chuckle, the vast majority of stuff you see in the shops today is all just off the shelf, someone has looked through a catalogue, picked what they want and had their own logo put on it (I'm not necessarily talking about cars here) As Rikky said, if you are happy with the product and the price, who cares? The bloke who's done the initial research has gone into it with his eyes open and is happy to sell it on in the knowledge that it will be re branded so whats the problem? Everyones making money and you are getting a good product. R+D costs a lot of money, how else do you think we get stuff cheap?? With manufacturing labour costs going through the roof the world-wide, expect to see more of it too  ________________________________________ Almost standard 1999 Bianca RallyeHilux InvincibleX daily 306 No.13  Carp and specialist Anglers Click here |
|
Posted 6th Mar 2014 at 08:35
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.