displaying posts 1 to 25 of 32

Pages (2): [1] 2

Author Subject: Throttle bodies favour
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #1
Hi all, really close to ordering my bodies for the Rallye, just a bit hesitant to spend that kind of cash. SO the favour im after is, is anyone on here running bodies and lives in herts or carbs and would be kind enough to take me for a blast in they're pug? So I can see if I really want to spend out on them.
thanks
Alek

________________________________________

white rallye
cherry dead rallye
s16
Posted 24th Jun 2013 at 21:20
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #2
whereabouts in herts? are you on the 205 forum, as well? Baz Thorn might have something pug with bodies or carbs on it.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 24th Jun 2013 at 21:22
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,291

Status: Offline

Post #3
If you like the sound just buy some

________________________________________

Bianca Rallye-S Flowers
205 GTi6 on ITB's
Posted 24th Jun 2013 at 21:32
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #4
I love the sound and want the throttle response but ive spent ££££ on cars before modding them inly to find I didn't really like it

________________________________________

white rallye
cherry dead rallye
s16
Posted 24th Jun 2013 at 21:37
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #5
Na not on the 205wrong forum. Im in Royston but I would drive to meet someone, I wouldnt expect someone to come to me

________________________________________

white rallye
cherry dead rallye
s16
Posted 24th Jun 2013 at 21:39
bigbadbowen

Seasoned Pro

Location: Winchester

Registered: 21 Nov 2003

Posts: 13,739

Status: Offline

Post #6
Throttle response is awesome dude and the sound is the muts Thumbs up
Posted 24th Jun 2013 at 21:40
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,641

Status: Offline

Post #7
+1 for bodies, anyone with throttle bodies as their avatar pic will say they are worth it though LOL

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 25th Jun 2013 at 00:13
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #8
Ohh yes, that soundtrack!

Yet to have my own set running, but have driven a mates 205 gti6 on bodies.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Jun 2013 at 00:21
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #9
Mm think I will take the plunge, its still going to be my daily too

________________________________________

white rallye
cherry dead rallye
s16
Posted 25th Jun 2013 at 05:42
phil b

Seasoned Pro

Location: Market Drayton

Registered: 25 Aug 2006

Posts: 3,089

Status: Offline

Post #10
I bought mine last yr and car still ain't on road...... Just buy em!!! I can't wait for the bwarpage

________________________________________

'97 PH1 'Sigma Blue' 306 GTI 6 project 'Tooters'
194.2bhp 127.6 dB
'96 PH1 'Black Noir' 306 DTurbo (project in permenant storage)
'94 300tdi LR Discovery (project gone dead and buried)
'99 td5 LR Discovery 2 (trailer tug and family bus) project 'in the garage getting chassis welded' (again)
The 6 can go fast, the disco can go anywhere
Built: 9 January 1997 - that's a Thursday
Skip Brown cars: tarporley Cheshire Tel: 01829 720492
add me --> philbrindley85@hotmail.com
TEAM: Snapper Sad
Posted 25th Jun 2013 at 08:50
pugjim

Seasoned Pro

Location: Sheffield

Registered: 11 Mar 2007

Posts: 1,380

Status: Offline

Post #11
daveyboy wrote:
+1 for bodies, anyone with throttle bodies as their avatar pic will say they are worth it though LOL


+1
Posted 25th Jun 2013 at 11:20
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,641

Status: Offline

Post #12
Case proved Smug

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 25th Jun 2013 at 11:21
pugjim

Seasoned Pro

Location: Sheffield

Registered: 11 Mar 2007

Posts: 1,380

Status: Offline

Post #13
On a standard engine your not going to see much of a gain in power but it will improve throttle response and obviously the induction noise. Add some cams and a good ecu and mapping then there is some bhp to be found. The engine in my avatar had some special piper regrinds, bosch 803 injectors and a bit of port work and produced 215bhp (cant remember the torque figure) on the same rollers it produced 165bhp in standard form. The only issue is the idle on really cold days on initial start up, after about a minute running its fine.
Posted 25th Jun 2013 at 12:31
gman

Seasoned Pro

Location: Didcot

Registered: 25 Oct 2007

Posts: 1,471

Status: Offline

Post #14
What bodies are you going for? I'm seriously tempted, but I would want to run cams as well which can be troublesome on these engines, especially if the heads been skimmed.

Don't fancy paying for pocketted pistons!

________________________________________

1992 Onyx Black 205 GTI-6
2005 Honda S2000 (Sold)
2002 Audi S3 (Sold)
2005 Clio 182 Trophy (sold)
Posted 25th Jun 2013 at 14:23
arigti6

Seasoned Pro

Location: Wiltshire

Registered: 24 Jan 2010

Posts: 2,365

Status: Offline

Post #15
A mate has a Clio 16v (Williams engine) bored out to 2.1 On ITBs does sound EPIC!

________________________________________

I Live for the 306 Ninja

TEAM CHERRY PINK RALLYE
2008 BMW ///M 320d
Posted 25th Jun 2013 at 14:45
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #16
Yeah If I go for them I. Also fitting cat cams and all mapped in. I know not to expect big power im no stranger to engine mods both n/a and turbo. Just wanted to go in a 306six with them first to see hear feel if I really want to do it

________________________________________

white rallye
cherry dead rallye
s16
Posted 25th Jun 2013 at 14:45
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #17
come on then you lot, where's the video links to convince me?

________________________________________

white rallye
cherry dead rallye
s16
Posted 25th Jun 2013 at 16:13
prism7guy

Seasoned Pro

Location: DoncastAAAAARGH

Registered: 13 Jan 2008

Posts: 4,554

Status: Offline

Post #18
https://www.youtube.com/watch?v=II0iHr0qKtE

Dan has 'bodies on his 205 gti6, it sounds epic and i'm now thinking of fitting bodies to mine for the time being. LOL

________________________________________

Goldie the track car.
Posted 25th Jun 2013 at 17:26
gti6girl

Seasoned Pro

Location: Dartford

Registered: 19 Feb 2007

Posts: 2,692

Status: Offline

Post #19
One of ours
http://youtu.be/hp3GiSsSd4k
Posted 25th Jun 2013 at 17:42
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #20
One of Sandy's best 1998 cc XU's

http://youtu.be/oLbNUHDbcTs

http://youtu.be/ICuCiPVDhjM

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Jun 2013 at 18:14
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #21
Sandy mapping a 1.9 MI

http://youtu.be/7X4FTERY_VE

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Jun 2013 at 18:16
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #22
2.2 MI.

http://youtu.be/jm7_aczh4IM

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Jun 2013 at 18:19
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,602

Status: Offline

Post #23
2.3 MI16

http://youtu.be/XQKSrdmEzwc

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 25th Jun 2013 at 18:20
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #24
unfortunetly this is now a wasted thread as I was going to borrow a bit pay for them, but alas ive just
been declined. might just whack cams in on they're own or just keep saving for now

________________________________________

white rallye
cherry dead rallye
s16
Posted 25th Jun 2013 at 18:47
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,583

Status: Offline

Post #25
If you're fitting bodies, it's compulsory to fit some extra revs*

Clicky



*Available in all good Halford stores.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 25th Jun 2013 at 22:09

Pages (2): [1] 2

Pug1Off
All times are GMT. The time is now 20:57

The Peugeot GTi-6 & Rallye Owners Club Ltd - Registered in England & Wales - Reg No: 07410694 - ©2020 all rights reserved.

Please Note : The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club Ltd or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy and legal information