The car in question in Craig's (Smegal's) old 6 and is quite well known on the forum.
the following bits have been SOLD subject to payment but maybe listed at a later date
KW V2 Inox Coilovers
One door handle
Upper strut brace
Lower strut brace (Phillipm jobbie)
Heres whats left
Rich W Roller Bearing Bottom Arms
In good condition.ball joints are recent and 16mm versions £150 collected or £160 delivered
Engine has covered 127k but has to be one of the best standard lumps i've come across.Top end was rebuilt by Carl (C.G cars) back in 2008 at the cost to Craig of £800 and runs sweet as a nut with no tapping/rattling and nasty noises.
Also benefits from a Solid bottom pulley and the "Rallye" non-air-con set up.will include loom manaifolds etc
Gearbox is smooth with no crunching of gears and the clutch has been replaced with an Uprated item (Craig can confirm this) which is great and not much heavier than a standard item.
Looking for £350 collected or can deliver/meet up to 75 miles from my home for fuel costs
As above a Nissens Ali radiator in good condition.have recept from when it was supplied/fitted by Carl (CG cars).Will include bottom hose so that it can fit ANY phase 6/Rallye. £55 collected or £65 delivered
Standard 15" Peugeot Cyclones with 2 michelin pe'2s fitted with approx 2mm of tread and 2 Khumo's with also 46/7mm of tread on them.wheels are in average condition with some slight bubbling to them.Will include wheel bolts in asking price £70 collected or £100 delivered
Front calipers in GWO.These have been refurbished and are finished in red.Ideal upgrade for lower spec model or 205.happy to include master cylinder in needed/wanted £50 collected or £60 delivered
Please see separate thread for Uprated/Rebuilt rear beam in the for sale section for full spec.
Wings - in good condition £10 each
Doors - in good condition £10 each (will come bare)
Bootlid - in ok condition (without wiper motor) £10
Any other bits please drop me a PM or ask on the thread