displaying posts 1 to 11 of 11

Author Subject: Phase 1 Cherry red
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline

Post #1
Not really much of a project, but meh, there isn't a "member's cars" section so it's going in here. So this has been in and out of various forum members' hands a few times, but for now it's in mine and is here to stay. Smile

Completely standard except the induction pipe & filter which were already on it, although I'm not sure on the long term plans for this so for now the intake can stay. Some of you will notice the front tyres are a little skinny, yes they're 175s and again they were already on it. Also, does anyone know what the GTI badge is off? I keep forgetting to compare but it looks a bit VW to me and is very different to the ones on the sides of the car.



________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 9th Jan 2013 at 00:05
gwyn rallye

Regular

Location: Anglesey

Registered: 05 Jul 2007

Posts: 443

Status: Offline

Post #2
Nice! had one identical to this a few years ago. Those pictures taken near Llyn Ogwen?

________________________________________

Bianca white 306 Rallye
Arctic blue Clio 182 FF
Alpine white 205 1.9 GTI
Posted 9th Jan 2013 at 08:44
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #3
bigger pictures would help id the badges!

that slate takes me back, predominantly to damp 60-70 miles rides on my bike in my teens!

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 9th Jan 2013 at 08:50
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline

Post #4
Yeah, a couple are near Ogwen, others on the old road down Ogwen Valley and others in Dinorwig. Thumbs up Well spotted!

Click the thumbnails then click the picture when photobucket opens. The originals are 10mp but PB resizes everything.

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 9th Jan 2013 at 08:59
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #5
use FlickR, its full of win, PB have re-sized those a bit too far :/

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 9th Jan 2013 at 09:11
seans6

Senior User

Location: Cheshire

Registered: 11 May 2011

Posts: 530

Status: Offline

Post #6
Looks very smart Smile You thinking of new suspension freshen it up and get it abit lower Razz
Posted 9th Jan 2013 at 11:37
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline

Post #7
Nope. Staying standard ride height for now. At most I doubt I'll ever drop it more than 20mm or so front and rear if I can get springs that only drop it that much. I'm not a fan of lowering cars really and to do it properly - by that I mean taking into account spring rates, ARB rates, damper settings etc - would cost more than I'm prepared to spend on it for the time being. I'll probably put some 16's on though with 205/45 rubber so I can keep a decent profile and have the arches looking a bit more filled out.

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 9th Jan 2013 at 12:33
swiftyboi006

Seasoned Pro

Location: Maidenhead

Registered: 12 Apr 2010

Posts: 2,110

Status: Offline

Post #8
The rear Gti badge is standard and so are the 6's on the sides but the silver ones are off a 106

________________________________________

cherry p1.....SOLD (regreting this)
blaze p2.....why did i buy this SOLD
Black p3 Love
Posted 13th Jan 2013 at 18:46
swiftyboi006

Seasoned Pro

Location: Maidenhead

Registered: 12 Apr 2010

Posts: 2,110

Status: Offline

Post #9
The rear Gti badge is standard and so are the 6's on the sides but the silver ones are off a 106

________________________________________

cherry p1.....SOLD (regreting this)
blaze p2.....why did i buy this SOLD
Black p3 Love
Posted 13th Jan 2013 at 18:46
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline

Post #10
Really nice, I like it. P1 looks very good in red - but then I've always liked red cars and am probably biased. Nice P1s are quite rare these days, great to see one in such good nick.

Having clean and seriously shiny lustrous paintwork is one of the best "mods" you can have on a car IMHO - sets it apart from everything else much better than dubious cosmetic mods.

I've replaced all my suspension with standard as I feel these cars are set up so well just as they come, but then again I don't do track days.

________________________________________

Cherry Rallye SOLD

Posted 13th Jan 2013 at 19:16
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline

Post #11
swiftyboi006 wrote:
The rear Gti badge is standard and so are the 6's on the sides but the silver ones are off a 106


ahh, ok. I thought the rear one was a bit odd because it is an upper case I which i didn't think was used. I might just debadge it at the back.

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 14th Jan 2013 at 20:16

All times are GMT. The time is now 03:06

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.