Right so I replaced this only a little while ago with a second hand one and putting the wheel back on the other day misthreaded one of the wheel bolts so I haven't learnt my lesson and am going to buy another second hand one.

Best priced delivered please unless your local to Croydon.

The wheel bearing will be replaced so no worries on that front. But preferably one that hasn't been on a car over 140k as it will no doubt misthread again.

Thanks you

________________________________________

Phase 2 Blaze GTi 6 (Standard) Sold
Phase 3 Supercharged China GTi 6 (249.8 BHP) Sold
Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold
Nissan 350Z (300 BHP)

I've got some which funnily enough have been on a car for 140k. Whilst mileage does affect things, for a thread to fail it's more likely down to numptys being heavy handed opposed to failure after they hit 140k. You'll never know often the wheels have been off.

Anyway, I've got a pair of good hubs here with decent round holes, fitted with ABS sensors in tact, clean disk retaining screw holes opposed to many which have remnants of sheared screw in. Also the bearings are good - granted you're not bothered about this.

The pair I will do for a good price if you were interested and you can keep the other as a spare or sell it on yourself.

________________________________________

Senior Test Automation Engineer for the 306GTi6 Owners Club Forum

---