Hi everyone I've spoken only scrappy this morn, they have got a 6 in but also got some 1.8's and 2.0's in is the ecu loom conectors the same wiring patterns/wire codes?? As I only need about a foot off both of then to splice into the original loom, I'm hopefully headin up later to get a steering ram so my wheels stop fouling the box (used a 5speed as a cheap fix)

________________________________________

'97 PH1 'Sigma Blue' 306 GTI 6 project 'Tooters'
194.2bhp 127.6 dB
'96 PH1 'Black Noir' 306 DTurbo (project in permenant storage)
'94 300tdi LR Discovery (project gone dead and buried)
'99 td5 LR Discovery 2 (trailer tug and family bus) project 'in the garage getting chassis welded' (again)
The 6 can go fast, the disco can go anywhere
Built: 9 January 1997 - that's a Thursday
Skip Brown cars: tarporley Cheshire Tel: 01829 720492
add me --> philbrindley85@hotmail.com
TEAM: Snapper

It's to fit a standalone so only so many wires are used I'll b taking my connector with me was just wondering as of such

________________________________________

'97 PH1 'Sigma Blue' 306 GTI 6 project 'Tooters'
194.2bhp 127.6 dB
'96 PH1 'Black Noir' 306 DTurbo (project in permenant storage)
'94 300tdi LR Discovery (project gone dead and buried)
'99 td5 LR Discovery 2 (trailer tug and family bus) project 'in the garage getting chassis welded' (again)
The 6 can go fast, the disco can go anywhere
Built: 9 January 1997 - that's a Thursday
Skip Brown cars: tarporley Cheshire Tel: 01829 720492
add me --> philbrindley85@hotmail.com
TEAM: Snapper

1.8 and xsi bay looms are identical but gti loom is different.