➜ advanced search
Add a more detailed reply Start a new thread in the Exhausts forum
Home -> Forums -> Exhausts -> Backbox split near hanger

displaying posts 1 to 14 of 14

Author Subject: Backbox split near hanger
hsustyle

Seasoned Pro

Location: High Hurstwood

Registered: 08 Nov 2011

Posts: 1,037

Status: Offline
Post #1
My stainless steel backbox has a small crack/ split along one of the hangers. the backbox and full system was supplied by pugperformance and looks near enough identical to a magnex,hangers in the same place. I've sealed it up with some firegum for now but its just a temporary measure.can it be welded or is there an easy fix? The whole system is pretty mint and I don't fancy binning it just for a small crack by the hanger.

________________________________________

Beef Beyond Belief
Posted 29th Jun 2012 at 09:19
Profile
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline
Post #2
Could take it to an engineering place that weld stainless and get them to weld it up.

But first I'd contact the company you bought it from and seek their advice. They may be willing for you to send it back for repair if it's covered by a lifetime warranty.

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 29th Jun 2012 at 09:33
    Profile
    hsustyle

    Seasoned Pro

    Location: High Hurstwood

    Registered: 08 Nov 2011

    Posts: 1,037

    Status: Offline
    Post #3
    It came on the car,no paperwork for it and pugperformance supplied it. I think I'll be better off just finding a specialist place to have a look at it.

    ________________________________________

    Beef Beyond Belief
    Posted 29th Jun 2012 at 10:10
    Profile
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,817

    Status: Offline
    Post #4
    probably powerflow or similar, any ss exhaust place could weld it up, or take it back to PPand ask if there's any warranty's and who made it.

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 29th Jun 2012 at 10:59
    Profile
    hsustyle

    Seasoned Pro

    Location: High Hurstwood

    Registered: 08 Nov 2011

    Posts: 1,037

    Status: Offline
    Post #5
    It has a metal plate on the bottom of the backbox and on the silencer,just like my old magnex. my friend said he can weld it. he said that the weld won't he stainless but he'll make a good job of it. So far the exhaust gum stuff seems to keep it sealed well,should last me till Monday morning. Also silencer knocks on heatshield,fun fun fun.

    ________________________________________

    Beef Beyond Belief
    Posted 29th Jun 2012 at 11:14
    Profile
    daveyboy

    aka Jim Davey

    Location: Southampton

    Registered: 01 Oct 2007

    Posts: 8,648

    Status: Offline
    Post #6
    I can fix it, but I'm based in Southampton

    ________________________________________

    R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

    Some of my services: (See my for sale threads)
    Engine mount/chassis repair
    Solid Beam Mounts BACK IN PRODUCTION
    Harness bars
    Posted 29th Jun 2012 at 11:23
    Profile
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,817

    Status: Offline
    Post #7
    JIM'LL FIX IT!!!!!

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 29th Jun 2012 at 11:28
    Profile
    roland rat

    Yeeeah Rat fans!

    Location: Swansea

    Registered: 29 Nov 2006

    Posts: 22,282

    Status: Offline
    Post #8
    welshpug! wrote:
    JIM'LL DAVE'LL FIX IT!!!!!


    EFA Thumbs up
    Posted 29th Jun 2012 at 11:31
    Profile
    hsustyle

    Seasoned Pro

    Location: High Hurstwood

    Registered: 08 Nov 2011

    Posts: 1,037

    Status: Offline
    Post #9
    welshpug! wrote:
    JIM'LL FIX IT!!!!!


    its Dave.

    ________________________________________

    Beef Beyond Belief
    Posted 29th Jun 2012 at 11:36
    Profile
    hsustyle

    Seasoned Pro

    Location: High Hurstwood

    Registered: 08 Nov 2011

    Posts: 1,037

    Status: Offline
    Post #10
    Got it booked for Monday morning. Gotta get under it later and push the silencer about to stop it banging on the heatshield.

    ________________________________________

    Beef Beyond Belief
    Posted 29th Jun 2012 at 11:44
    Profile
    daveyboy

    aka Jim Davey

    Location: Southampton

    Registered: 01 Oct 2007

    Posts: 8,648

    Status: Offline
    Post #11
    I hate you all, that's the last time I offer to seal another man's crack! LOL

    ________________________________________

    R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

    Some of my services: (See my for sale threads)
    Engine mount/chassis repair
    Solid Beam Mounts BACK IN PRODUCTION
    Harness bars
    Posted 30th Jun 2012 at 10:35
    Profile
    barnettjd77

    Regular

    Location: dorchester

    Registered: 12 Nov 2011

    Posts: 483

    Status: Offline
    Post #12
    smack a mig on it, simplesSmile

    ________________________________________

    A red rallye in progress!
    Posted 1st Jul 2012 at 19:42
    Profile
    darzmat

    Senior User

    Location: nairn

    Registered: 14 Jan 2011

    Posts: 879

    Status: Offline
    Post #13
    barnettjd77 wrote:
    smack a mig on it, simplesSmile


    ye my back box split on the connection at the back and my mate just cranked up the mig and its been fine for about year now

    ________________________________________


    1997 blaze GTI-6 bought january '11 £800

    Spend to date on parts £827.88

    Posted 1st Jul 2012 at 21:26
    Profile
    prism7guy

    Seasoned Pro

    Location: DoncastAAAAARGH

    Registered: 13 Jan 2008

    Posts: 4,639

    Status: Offline
    Post #14
    My magnex split just under the offside hanger, MIG'd it and it's been fine ever since. Cool

    ________________________________________

    Goldie the track car.
    Posted 3rd Jul 2012 at 21:42
    Profile
    Home -> Forums -> Exhausts -> Backbox split near hanger

    All times are GMT. The time is now 01:02

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.