➜ advanced search
Add a more detailed reply Start a new thread in the Parts For Sale forum
Home -> Forums -> Parts For Sale -> BREAKING: Xsara VTS - Gti engine, Beam, Brakes etc etc

displaying posts 1 to 25 of 29

Pages (2): [1] 2

Author Subject: BREAKING: Xsara VTS - Gti engine, Beam, Brakes etc etc
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #1
Right, finally got round to breaking this car.

PM FOR SPEEDY REPLY

PICS TO COME WHEN I HAVE A FASTER PC TO USE BUT THEY'RE HERE: [url]http://s568.photobucket.com/albums/ss125/kris306dt2009/strippingxsara/[/url]

117k Non-Tapper engine, Loom, ECU. Can be seen running but cambelt starting to frey. No Smoke, reaches temp fine, fans work etc £ SOLD

5spd Gearbox £75

Steering rack - looks to be either 2.6 or 2.7 lock to lock. SOLD

Wheels (205/40/17) TSW - Two with nearly new Prada Spec2, Two with Federals. All tread in good condition. Usual Kerbing. £ SOLD

Rear disc beam £90

Nearside rear calliper, looks to be a recent replacement. £30

283mm Front brakes c/w good pads and rusty discs (will clean up with sandpaper) £ SOLD

Stainless cat-back exhaust system. Brand unknown, it's reasonably quiet (does have cat on there though) 4" tailpipe £100

Front struts c/w lowering springs approx 40mm £30

ALL OTHER PARTS AVAILABLE...Front ARB Fuel pump, Subframe, Steering rack, interior, bodywork, bodykit, spoiler, wiper motors, dash, interior looms, clocks etc etc. Please ask.













More pictures here: [url]http://s568.photobucket.com/albums/ss125/kris306dt2009/strippingxsara/[/url]

________________________________________

www.krisb.co.uk
Posted 13th Feb 2012 at 18:16
Profile
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline
Post #2
[edit] Just seen the link, phase 1. May be interested in the engine if delivery is an option. I'll get back to you.

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 13th Feb 2012 at 19:52
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #3
I beleive, a ph1... not that familiar with the xsara's to be honest (as bad as it sounds), never get to work on them.

________________________________________

www.krisb.co.uk
Posted 13th Feb 2012 at 19:57
Profile
Rich E Forum Admin

Location: Hertfordshire

Registered: 27 Apr 2005

Posts: 7,757

Status: Offline
Post #4
It's a phase 1

________________________________________

Rich
Posted 13th Feb 2012 at 20:01
Profile
Dai

Newbie

Location: Pembroke

Registered: 28 Dec 2011

Posts: 12

Status: Offline
Post #5
Interested in the rack. And would you split the trailing arms from the rear beam?
Posted 13th Feb 2012 at 20:03
Profile
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline
Post #6
Thanks. I was too slow with the edit. I'll get back to you asap if I want it. Smile

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 13th Feb 2012 at 20:11
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #7
Hi guys.

Engine delivery is possible. I can palletise it. Would be easier for you to arrange courier though.

Rack is now sold i'm afraid.

Trailing arms i can split i guess. The TB's can be sold to the 205 guys ( I beleive?).... I'd need to see the condition of the pins before i sell them though. Although there's no camber OR play (checked).

What would you offer for the arms? I need to justify splitting Smile

Kris

________________________________________

www.krisb.co.uk
Posted 13th Feb 2012 at 23:23
Profile
Dai

Newbie

Location: Pembroke

Registered: 28 Dec 2011

Posts: 12

Status: Offline
Post #8
£50 delivered if the shafts are in good condition?

TB's are an upgrade for 306s i think.
Posted 13th Feb 2012 at 23:50
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #9
Okay, let me see what i can get for the bars and i'll get back to you 2moro.

Kris

________________________________________

www.krisb.co.uk
Posted 14th Feb 2012 at 00:02
Profile
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline
Post #10
Ok I'll look into it. I'll let you know by PM tomorrow if I want it, just need to arrange with the university somewhere to keep it (would be used for my final year dissertation next year).

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 14th Feb 2012 at 00:20
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #11
Oh right cool! What would you be doing with it then if you dont mind me asking?

________________________________________

www.krisb.co.uk
Posted 14th Feb 2012 at 00:22
Profile
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline
Post #12
As much as I'd like to do some development on it, it'll most likely be a strip and rebuild, measuring every single small detail as I go along and modelling it in CAD, plus maybe trying to predict the torque curve and comparing it to the real thing. At least that's the plan so far. Whatever I do my project on it'll be engine work, and I'd rather do it on something other than one of the hordes of Ford Zetec/Sigma engines the University already has.

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 14th Feb 2012 at 01:55
Profile
24seven

Seasoned Pro

Location: Derby

Registered: 05 Oct 2005

Posts: 6,221

Status: Offline
Post #13
Pm on it's way. Have a free bump! Smile

________________________________________

Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 15th Feb 2012 at 17:54
Profile
swiftyboi006

Seasoned Pro

Location: Maidenhead

Registered: 12 Apr 2010

Posts: 2,110

Status: Offline
Post #14
How much for the small no return valve thats Connected to the pipes from the cam cover to the throttle boddie?

________________________________________

cherry p1.....SOLD (regreting this)
blaze p2.....why did i buy this SOLD
Black p3 Love
Posted 15th Feb 2012 at 18:22
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #15
I was intending on selling the engine COMPLETE. Ready to drop in to a car and run Smile Sorry bud.

________________________________________

www.krisb.co.uk
Posted 15th Feb 2012 at 19:48
Profile
krisb

Regular

Location: Dorking, Surrey

Registered: 17 Aug 2010

Posts: 122

Status: Offline
Post #16
24seven wrote:
Pm on it's way. Have a free bump! Smile


Sorry, my inbox was full... with all 5 in the inbox and 3 in the outbox?!

________________________________________

www.krisb.co.uk
Posted 15th Feb 2012 at 19:49
Profile
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline
Post #17
5 pm inbox limit.

Should be pleased that the sent items don't count towards that!

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 15th Feb 2012 at 19:58
    Profile
    krisb

    Regular

    Location: Dorking, Surrey

    Registered: 17 Aug 2010

    Posts: 122

    Status: Offline
    Post #18
    Wow. Well if it's easier guys then just click the link in my signature and email me from there Smile

    Been stripping this today...

    Engines on a pallet ready to go, subframe is out, front brakes and struts are out.

    Also to add to the list...

    Undertray (should fit 306)

    Front ARB

    ________________________________________

    www.krisb.co.uk
    Posted 15th Feb 2012 at 20:01
    Profile
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,817

    Status: Offline
    Post #19
    torsion bars don't fit a 205, way too long, fit a 306 fine though, nice fast r4oad type upgrade.

    just emailed you btw Smile

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 15th Feb 2012 at 20:04
    Profile
    Dai

    Newbie

    Location: Pembroke

    Registered: 28 Dec 2011

    Posts: 12

    Status: Offline
    Post #20
    Email sent Smile
    Posted 15th Feb 2012 at 21:20
    Profile
    krisb

    Regular

    Location: Dorking, Surrey

    Registered: 17 Aug 2010

    Posts: 122

    Status: Offline
    Post #21
    I don't know whats going on with the pictures... all the other forums resize them.

    Bump... these are off the car and ready to go. Discs are soaking to help clean them up but cleaned up the one face to show they're okay.



    Aircon pipe... for WELSHPUG



    Subframe (gear linkage ball thing now back on. Lower arms removed) £20



    Undertray (pretty sure it's the same as a 306, but even if it isn't then it's nothing a few zip ties and self tappers wont sort) £25



    21mm Front Anti Roll Bar (paint coming off at each end because of rust) £25



    Offside Driveshaft with ABS £20



    Nearside shaft with ABS £15 (sorry no picture, yet)

    GTI Heater matrix pipes. No cracks. £20




    Thanks guys

    ________________________________________

    www.krisb.co.uk
    Posted 16th Feb 2012 at 19:16
    Profile
    24seven

    Seasoned Pro

    Location: Derby

    Registered: 05 Oct 2005

    Posts: 6,221

    Status: Offline
    Post #22
    krisb wrote:
    24seven wrote:
    Pm on it's way. Have a free bump! Smile


    Sorry, my inbox was full... with all 5 in the inbox and 3 in the outbox?!


    Ahh, no worries. I'll take the engine. Can you let me know your postcode so I can shop for couriers please? I'll arrnge a date and time with you before arranging a collection of course, just want to find a good price first. Smile

    ________________________________________

    Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
    Posted 17th Feb 2012 at 16:43
    Profile
    krisb

    Regular

    Location: Dorking, Surrey

    Registered: 17 Aug 2010

    Posts: 122

    Status: Offline
    Post #23
    Engine SOLD.

    Brakes reduced to £70

    ________________________________________

    www.krisb.co.uk
    Posted 20th Feb 2012 at 11:50
    Profile
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,817

    Status: Offline
    Post #24
    Hi Kris, thanks for the pic, sorry I didn't get back to you sooner, Jon has gone ahead and ordered a new pipe from Peugeot, but in future that looks like it'll fit just fine as long as the length is correct, its £25 cheaper!!

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 20th Feb 2012 at 12:02
    Profile
    krisb

    Regular

    Location: Dorking, Surrey

    Registered: 17 Aug 2010

    Posts: 122

    Status: Offline
    Post #25
    Ahh, okay then dude Smile

    Will it fit a 306?

    ________________________________________

    www.krisb.co.uk
    Posted 20th Feb 2012 at 12:04
    Profile
    Home -> Forums -> Parts For Sale -> BREAKING: Xsara VTS - Gti engine, Beam, Brakes etc etc

    Pages (2): [1] 2

    All times are GMT. The time is now 03:33

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.