Well i now have 2 sets of bucket seats i only wanted 1 set ha well it gave me a chance to see what ones i liked best.

I now have 1 seat fitted, back carpets and seats taken out and bolts and tools all over my car. What a f**king rattly mess it was on my way to work this morning I went all out on the sub frames and welded in some angle iron to be honest why splash out when it does the same job and i wont be putting standard seats back in, that can be the next owners problem.

Anyway back on track, i have set the seat quite low compared to standard seat hight and now feels a lot better sitting lower down in the car. Need to get more stripped out tho for the track day at knockhill on sunday. Sound deadening can stay in for now, cant be bothered with that and i will get other seat in tomorrow and oil catch tank mounted in place after work.

I did fit the RMD seat yesterday but now i have fitted the triple six seat now it has turned up




RMD seat vs. Triple Six seat

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Am a fork lift driver at the nissan plant in sunderland. Am ment to be paying my holiday off but keep buying things for the car

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Best keep these pics as after I take you through the grass an gravel traps doubt it be as good lol

________________________________________

In my garage just now

2003 BMW M3 & 2009 L200 Raging Bull
& Audi Q5 S Line
AX stock rod & Saxo Stock rod
Sold the bike an charged rallye an bought a caravan, midlife crisis or what!

Eddy do you mind telling me how much the winddeflectors were?

See welsh ben on here as he dies them just cheaper than ebay

________________________________________

In my garage just now

2003 BMW M3 & 2009 L200 Raging Bull
& Audi Q5 S Line
AX stock rod & Saxo Stock rod
Sold the bike an charged rallye an bought a caravan, midlife crisis or what!

Had an excellent day yesterday at knockhill. Car performed better than i expected didnt put a foot long all day. Brembos were abit noisey but other than that the yokohana pradas were very good, the car handled well as well. Only problem i had was on saturday when driving up to chris's done a 165mile drive and a couple of mile from chris's a caliper bolt fell out but luckley i made it there ok.
Saturday i fitted my oil catch tank. Nothing much planned at the minute as i have a holiday to payfor but once thats out of the way i will be lookibg at getting a cage.

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Had to duck tape my air feed pipe as well as it kept on coming off and dropping behind the radiator!
Got a few pics here from knockhill

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

They been like that for a little while now mate still want some rallye blanks tho

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Cool mate al have them off you could also do with your indicator and window wiper stalk as well to be honest

Well so much for not doing much else for a little while Painted my wheels at the weekend and also getting my mate to cut me come perspex windows

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Thanks ash. Just wish i could get that stupid spoiler off

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

I have gti6 stalks but i have removed fogs and rain sensor and the rallye stalks come without them on so wanting to replace them

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

The big sticker on the side will be comming off i think. Yeah i will let you know how they turn out mate. He done an MDF template what we tried yesterday and fit perfect. Going to go for 2mm thick perspex as not mich point going any thicker, just means the 2mm stuff should be easyer to fit and bend. Also works out alot cheaper aswell.
New standard wishbone bushes turned up yesterday so hoping to fit these on friday ready for the rolling road day up at sos motorsports. Got a heat wrapper manifold sitting in my shead what i have been thinking of fitting.

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Fingers crossed i need to stop buying things and pay my holiday off insurance is due next week and tax at the end of the month so looks like an expensive month for me

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =