|
displaying posts 1 to 10 of 10
| Author | Subject: 807 brembos, and 16s |
 eliotrw
Seasoned Pro  Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #1
I don't see why not but can anyone tell me if 807 brembos will fit under 16 inch pro race 2s? I'm not sure they are any bigger than 406 or Renault ones. Nico had those 206 wheels over his it think but I'm not sure if he had spacers Some of you ( like welshpug) are quite clued up with this stuff and I can't work it out.... ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
 Posted 7th Jan 2012 at 01:20
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #2
If it helps I think nico had challengers so are there any 16s with similar clearance?________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 11th Jan 2012 at 19:01
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #3
quite likely given the 807's largest wheel was 7x16£272 each+vat btw. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 11th Jan 2012 at 19:36
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #4
I know where to get them a lot cheaper  less than half price in fact.________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 11th Jan 2012 at 20:03
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #5
I know where to get them a lot cheaper less than half price in fact.________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 11th Jan 2012 at 20:03
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #6
Having said that the adapters are like hens teeth.________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 11th Jan 2012 at 20:08
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #7
indeed, they arent shown at all on the servicebox diagrams.where can you get them? ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 11th Jan 2012 at 20:22
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #8
french ebay, no where special really. 450 euros for a new pair________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 11th Jan 2012 at 20:28
|
|
|
marco gti6
Seasoned Pro  Location: Troisvierges Registered: 09 Mar 2009 Posts: 1,350 Status: Offline |
Post #9
I had a chat with Nico once about these. The adapters to fit the calipers to the 6's hub can be ordered at citroen sport apparently. I think i even had a part number somewhere. Just check on the citroen sport site and look for the C2 challenge asphalt setup, the adapter are listed there they are about 22€ each.I'm currently looking at some ProRace 1.2 at the moment, what a coincidence  |
|
Posted 7th Feb 2012 at 15:47
|
|
|
eliotrw
Seasoned Pro Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #10
I've had the adapters for a few weeks. Nice things they are very very light. They were.... expensive. However now I can't find the 807 brembos anywhere lol ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 7th Feb 2012 at 18:24
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.